S-13 AND S-14 STANDPIPE SYSTEM
__________ CHECK VALVES ARE NORMALLY USED IN SYSTEMS USING A GATE VALVE. - ANS -SWING
\__________ IS A DESIGNED SERIES OF BEAMS USED TO SUPPORT MECHANICAL EQUIPMENT. - ANS
-DUNNAGE
\__________ VALVES ARE USED TO SHUT DOWN PART OF THE SYSTEM WHEN CONDUCTING REPAIRS OR
MAINTENANCE. - ANS -POST INDICATOR
\A ____________ TEST REQUIRES AT LEAST TWO INDIVIDUALS. - ANS -FULL FLOW TRIP
\A FIRE DEPT. CONNECTION WAS FORMERLY KNOWN AS A ______________ CONNECTION. - ANS -SIAMESE
\A PRESSURE RESTRICTING DEVICE SHALL BE INSTALLED AT HOSE OUTLETS WHERE STATIC PRESS.
EXCEEDS ___________ PSI. - ANS -80
\ACCEPTABLE AIR PRESSURE INSIDE AIR TANKS MAY VARY FROM ____________ PSI. - ANS -15-80
\CHECK VALVES SHALL BE INSPECTED ___________ EVERY 5 YEARS. - ANS -INTERNALLY
\EXTERIOR SIGNAGE SHALL HAVE A __________ BACKGROUND WITH 1 INCH HIGH ___________ LETTERS. -
ANS -WHITE, RED
\FOR 1938-1968 HOSE OUTLET AND RELEASE RACKS, THE HOSE SHOULD BE KEPT BETWEEN __________ FT
AND ___________ FT ABOVE THE FLOOR OR LANDING. - ANS -5, 6
\HOSE MARKES "SUPPLY HOSE" SHALL NOT EXCEED __________ PSI. - ANS -185
\IF ENCLOSED IN A CABINET, THE HOSE RACK SHALL SWING OUT AT LEAST ____________. - ANS -90 DEGREES
\IN ABSENCE OF A SPECIFIC DESIGNEE, THE BUILDING OWNER SHALL BE CONSIDERED THE _____________. -
ANS -IMPAIRMNENT COORDINATOR
\IN AN OS&Y VALVE, IF THE STEM IS RAISED ABOVE THE CONTROL WHEEL THE VALVE IS ___________. - ANS
-OPEN
\INTERIOR SIGNAGE SHALL HAVE A ________ BACKGROUND WITH 1 INCH HIGH __________ LETTERS. - ANS
-RED, WHITE
\INTERIORS OF _________ TANKS SHALL BE INSPECTED EVERY 3 YEARS. - ANS -STEEL
__________ CHECK VALVES ARE NORMALLY USED IN SYSTEMS USING A GATE VALVE. - ANS -SWING
\__________ IS A DESIGNED SERIES OF BEAMS USED TO SUPPORT MECHANICAL EQUIPMENT. - ANS
-DUNNAGE
\__________ VALVES ARE USED TO SHUT DOWN PART OF THE SYSTEM WHEN CONDUCTING REPAIRS OR
MAINTENANCE. - ANS -POST INDICATOR
\A ____________ TEST REQUIRES AT LEAST TWO INDIVIDUALS. - ANS -FULL FLOW TRIP
\A FIRE DEPT. CONNECTION WAS FORMERLY KNOWN AS A ______________ CONNECTION. - ANS -SIAMESE
\A PRESSURE RESTRICTING DEVICE SHALL BE INSTALLED AT HOSE OUTLETS WHERE STATIC PRESS.
EXCEEDS ___________ PSI. - ANS -80
\ACCEPTABLE AIR PRESSURE INSIDE AIR TANKS MAY VARY FROM ____________ PSI. - ANS -15-80
\CHECK VALVES SHALL BE INSPECTED ___________ EVERY 5 YEARS. - ANS -INTERNALLY
\EXTERIOR SIGNAGE SHALL HAVE A __________ BACKGROUND WITH 1 INCH HIGH ___________ LETTERS. -
ANS -WHITE, RED
\FOR 1938-1968 HOSE OUTLET AND RELEASE RACKS, THE HOSE SHOULD BE KEPT BETWEEN __________ FT
AND ___________ FT ABOVE THE FLOOR OR LANDING. - ANS -5, 6
\HOSE MARKES "SUPPLY HOSE" SHALL NOT EXCEED __________ PSI. - ANS -185
\IF ENCLOSED IN A CABINET, THE HOSE RACK SHALL SWING OUT AT LEAST ____________. - ANS -90 DEGREES
\IN ABSENCE OF A SPECIFIC DESIGNEE, THE BUILDING OWNER SHALL BE CONSIDERED THE _____________. -
ANS -IMPAIRMNENT COORDINATOR
\IN AN OS&Y VALVE, IF THE STEM IS RAISED ABOVE THE CONTROL WHEEL THE VALVE IS ___________. - ANS
-OPEN
\INTERIOR SIGNAGE SHALL HAVE A ________ BACKGROUND WITH 1 INCH HIGH __________ LETTERS. - ANS
-RED, WHITE
\INTERIORS OF _________ TANKS SHALL BE INSPECTED EVERY 3 YEARS. - ANS -STEEL
