module 1: Study Guide Questions with
Correct Answers Latest Update
Companies with strong safety cultures usually have lower? - Answerincident and
accident rates and fewer turnover rates.
which of these is a true statement regarding safety? - AnswerSafety is a learned
behavior and attitude.
poor lighting, excessive noise, and inadequate guards for moving parts are examples
of? - Answerunsafe conditions.
the activity that consists of breaking a job into its components tasks and then analyzing
each step for potential hazards is called a? - AnswerJob safety analysis
a measure of the probability, consequences, and exprosure related to an event is
referred to as? - Answerrisk
if there is a hole in the floor of a structure, the preferred method of protecting workers
from fall is to? - Answerthey can be guarded with marking flags or covered.
the D-ring or support point on a safety harness should be placed? - Answerbetween
the shoulder blades
all personal fall arrest system should be inspected monhtly by a? -
AnswerCompetent person.
Lanyards that gave no shock-absorbing features are used for? - Answerpositioning
and fall restraint
when placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least? -
Answer1/4 of the distance between the ground and the point the ladder touches the
structure ( ex.
when performing overhead work on scaffolding what protective measurement must be
taken prevent objects from falling and striking a person below? - Answerthe top rail
must be screened.
Correct Answers Latest Update
Companies with strong safety cultures usually have lower? - Answerincident and
accident rates and fewer turnover rates.
which of these is a true statement regarding safety? - AnswerSafety is a learned
behavior and attitude.
poor lighting, excessive noise, and inadequate guards for moving parts are examples
of? - Answerunsafe conditions.
the activity that consists of breaking a job into its components tasks and then analyzing
each step for potential hazards is called a? - AnswerJob safety analysis
a measure of the probability, consequences, and exprosure related to an event is
referred to as? - Answerrisk
if there is a hole in the floor of a structure, the preferred method of protecting workers
from fall is to? - Answerthey can be guarded with marking flags or covered.
the D-ring or support point on a safety harness should be placed? - Answerbetween
the shoulder blades
all personal fall arrest system should be inspected monhtly by a? -
AnswerCompetent person.
Lanyards that gave no shock-absorbing features are used for? - Answerpositioning
and fall restraint
when placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least? -
Answer1/4 of the distance between the ground and the point the ladder touches the
structure ( ex.
when performing overhead work on scaffolding what protective measurement must be
taken prevent objects from falling and striking a person below? - Answerthe top rail
must be screened.
