Test Bank 91-97
Terms in this set (32)
_____, a two-component metal consisting Wrought iron
of a high purity iron and iron silicate (slag),
is commonly used in machinery and
equipment construction.
Sheet metal
Pig iron
Wrought iron
Cast iron
Heat for welding PVC plastic comes Hot air
from_____.
An electric arc
Hot air
Plasma gas
Molten metal
Which of the following is NOT Pliers
thermoplastic?
Vice
Pliers
MIG welder
Mold
Which of the following types of fence Post and Rail
designs is most commonly used to mark
property field boundaries?
Stockade
Lattice
Post and rail
Basket weave
One of the most common and costly errors On the wrong property
made in building a fence is constructing it
_____.
On the wrong property
Too sturdily
On land that is not level
Out of wire
1/5
, Light metal rods and bars are most Vice
typically bent using a ______.
Vice
Pliers
MIG welder
Mold
The percentage of _____ in steel affects Carbon
its hardness.
Chromium
Manganese
Carbon
Bronze
Concrete will begin to set within _____ 30 to 45
minutes after the water is added.
10
30 to 45
60 to 80
120
Aggregates used in concrete work are Fine, Coarse
categorized as either _____ or _____
Fine, coarse
Ready-mixed, unmixed
Wet, dry
Masonry, air-entrained
A concrete block with mortar placed on its Buttered
end, in preparation for laying, is said to be
_____.
Linteled
Buttered
Anchored
Mortared
_____, which give cement its strength, are Hydrates
compounds formed by the union of water
with another substance.
Hydrates
Aquates
Aluminates
Silicates
The standard measure for mixed concrete Cubic Yard
that has not yet set is the _____.
Cubic foot
Square yard
Square foot
Cubic Yard
Walls are typically painted with brushes Three to four inches
that are ______ wide.
Two inches
One and one-half inches
Five to six inches
Three to four inches
2/5
Terms in this set (32)
_____, a two-component metal consisting Wrought iron
of a high purity iron and iron silicate (slag),
is commonly used in machinery and
equipment construction.
Sheet metal
Pig iron
Wrought iron
Cast iron
Heat for welding PVC plastic comes Hot air
from_____.
An electric arc
Hot air
Plasma gas
Molten metal
Which of the following is NOT Pliers
thermoplastic?
Vice
Pliers
MIG welder
Mold
Which of the following types of fence Post and Rail
designs is most commonly used to mark
property field boundaries?
Stockade
Lattice
Post and rail
Basket weave
One of the most common and costly errors On the wrong property
made in building a fence is constructing it
_____.
On the wrong property
Too sturdily
On land that is not level
Out of wire
1/5
, Light metal rods and bars are most Vice
typically bent using a ______.
Vice
Pliers
MIG welder
Mold
The percentage of _____ in steel affects Carbon
its hardness.
Chromium
Manganese
Carbon
Bronze
Concrete will begin to set within _____ 30 to 45
minutes after the water is added.
10
30 to 45
60 to 80
120
Aggregates used in concrete work are Fine, Coarse
categorized as either _____ or _____
Fine, coarse
Ready-mixed, unmixed
Wet, dry
Masonry, air-entrained
A concrete block with mortar placed on its Buttered
end, in preparation for laying, is said to be
_____.
Linteled
Buttered
Anchored
Mortared
_____, which give cement its strength, are Hydrates
compounds formed by the union of water
with another substance.
Hydrates
Aquates
Aluminates
Silicates
The standard measure for mixed concrete Cubic Yard
that has not yet set is the _____.
Cubic foot
Square yard
Square foot
Cubic Yard
Walls are typically painted with brushes Three to four inches
that are ______ wide.
Two inches
One and one-half inches
Five to six inches
Three to four inches
2/5
