1. Alternating Current (AC) Ans: An electrical current that changes direction on a
cyclical basis
2. Ammeter Ans: A test instrument used to measure current flow
3. Ampere (A) Ans: The basic unit of measurement for electrical current
4. Analog Meter Ans: A meter that uses a needle to indicate a value on a scale
5. Arc Ans: A visible flash of light and the release of heat that occurs when an electrical
current crosses an air gap
6. Clamp-On Ammeter Ans: An ammeter with operable jaws that are placed around a
conductor to sense the magnitude of the current flow
7. Conductor Ans: Control Devices consisting of a coil and one or more sets of contacts
used as switching devices in high-voltage circuits
8. Continuity Ans: A continuous current path. The absence of this indicates an open
circuit
9. Current (I) Ans: The rate or volume at which electrons flow in a circuit. Measured in
amperes
10. Digital Meter Ans: A meter that provides a direct numerical reading of the value
measured
11. Direct Current (DC) Ans: An electric current that flows in one direction. A batter is a
1/5
, common source of this voltage
12. Electromagnet Ans: A coil of wire wrapped around a soft iron core. When current
flows through the coil, magnetism is created
13. Ground Fault Ans: Accidental contact between an energizes conductor and a con-
nection to ground, such as an equipment frame. The fault current passes through the
grounding systems, as well as a person or other conductive surface in the path
14. Inductive (Induction) Ans: Of a load, able to become electrically charged from being
near another electrically charges body, or to become magnetized by being within an existing
magnetic field
15. In-Line Ammeter Ans: A current-reading meter that is connected in series with the
circuit under test
16. Inrush Current Ans: A significant rise in electrical current associated with energizing
inductive loads such as motors
17. Insulator Ans: A device or substance that inhibits the flow of current; the opposite of a
conductor
18. Ladder Diagram Ans: A simplified schematic in which the load lines are arranged
like the rungs of a ladder between vertical lines representing the voltage source
19. Line Duty Ans: A protective device connected in series with the supply voltage
20. Loads Ans: Devices that convert electrical energy into another form of energy (heat,
2/5