1. A pipe carrying water has a diameter of 0.5 m at point A and 0.25 m at point B. The velocity
at point A is 2 m/s. What is the velocity at point B?
Answer: Using the equation of continuity:
2. What is the unit of dynamic viscosity?
A. N•s/m²
B. kg/m•s
C. N/m²•s
D. m²/s
Answer: A) N•s/m²
Rationale: Dynamic viscosity is a measure of a fluid’s resistance to flow. Its unit is N•s/m²,
which is equivalent to Pascal-seconds (Pa•s). This is the SI unit for dynamic viscosity.
3. The pressure at the center of a fluid in a rotating cylindrical container increases due to:
A. Centripetal force
B. Coriolis force
C. Viscous drag
D. Gravitational force
Answer: A) Centripetal force
,Rationale: The pressure increases due to the centripetal force in a rotating fluid, which arises
from the radial movement of fluid particles that are constrained by the container walls.
4. Which of the following is the equation for the Bernoulli's principle?
A. P + ½ρv² + ρgh = constant
B. P + ρv² + gh = constant
C. P + ½ρv² = constant
D. P + ρgh = constant
Answer: A) P + ½ρv² + ρgh = constant
Rationale: Bernoulli’s equation states that for an incompressible, steady flow, the sum of
pressure energy, kinetic energy, and potential energy per unit volume remains constant along a
streamline.
5. The velocity profile for laminar flow in a pipe is:
A. Linear
B. Parabolic
C. Exponential
D. Uniform
Answer: B) Parabolic
, Rationale: In laminar flow through a pipe, the velocity profile follows a parabolic shape. The
maximum velocity occurs at the center of the pipe, and the velocity decreases towards the pipe
walls.
6. Which of the following is an example of a non-Newtonian fluid?
A. Water
B. Honey
C. Air
D. Alcohol
Answer: B) Honey
Rationale: Non-Newtonian fluids do not follow Newton’s law of viscosity, where the shear stress
is proportional to the shear rate. Honey, for example, behaves as a non-Newtonian fluid because
its viscosity changes under different shear rates.
Rationale: The velocity increases as the diameter decreases to conserve mass in steady flow.
7. For a fluid to be incompressible, the density must be:
A. Constant
B. Zero
C. Infinite
D. Variable
at point A is 2 m/s. What is the velocity at point B?
Answer: Using the equation of continuity:
2. What is the unit of dynamic viscosity?
A. N•s/m²
B. kg/m•s
C. N/m²•s
D. m²/s
Answer: A) N•s/m²
Rationale: Dynamic viscosity is a measure of a fluid’s resistance to flow. Its unit is N•s/m²,
which is equivalent to Pascal-seconds (Pa•s). This is the SI unit for dynamic viscosity.
3. The pressure at the center of a fluid in a rotating cylindrical container increases due to:
A. Centripetal force
B. Coriolis force
C. Viscous drag
D. Gravitational force
Answer: A) Centripetal force
,Rationale: The pressure increases due to the centripetal force in a rotating fluid, which arises
from the radial movement of fluid particles that are constrained by the container walls.
4. Which of the following is the equation for the Bernoulli's principle?
A. P + ½ρv² + ρgh = constant
B. P + ρv² + gh = constant
C. P + ½ρv² = constant
D. P + ρgh = constant
Answer: A) P + ½ρv² + ρgh = constant
Rationale: Bernoulli’s equation states that for an incompressible, steady flow, the sum of
pressure energy, kinetic energy, and potential energy per unit volume remains constant along a
streamline.
5. The velocity profile for laminar flow in a pipe is:
A. Linear
B. Parabolic
C. Exponential
D. Uniform
Answer: B) Parabolic
, Rationale: In laminar flow through a pipe, the velocity profile follows a parabolic shape. The
maximum velocity occurs at the center of the pipe, and the velocity decreases towards the pipe
walls.
6. Which of the following is an example of a non-Newtonian fluid?
A. Water
B. Honey
C. Air
D. Alcohol
Answer: B) Honey
Rationale: Non-Newtonian fluids do not follow Newton’s law of viscosity, where the shear stress
is proportional to the shear rate. Honey, for example, behaves as a non-Newtonian fluid because
its viscosity changes under different shear rates.
Rationale: The velocity increases as the diameter decreases to conserve mass in steady flow.
7. For a fluid to be incompressible, the density must be:
A. Constant
B. Zero
C. Infinite
D. Variable