• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 11 páginas
Examen

Instrument tech V4 Test Questions Version With Complete Solutions

Document preview thumbnail
Vista previa 2 fuera de 11 páginas

A Technology bypassing conventional I/O by using direct communications between smart field devices and associated control processors is: - ANS Fieldbus. Redundant controllers in a distributed control system reside: - ANS As a hot standby at the central processor. The ultimate period method for tuning a controller was first proposed by: - ANS Ziegler and Nichols. One method of oxygen analysis focuses on the: - ANS Color Properties of Oxygen. A piece of pipe has an AISI classification of A105, the major alloy is: - ANS Carbon. Atmosphere testing must be conducted before entry into a confined space to check for: - ANS Oxygen Content. Which of the following contains information about chemicals found on a job site? - ANS Material Safety Data Sheet (MSDS). Which of the following materials is selected when resistance to corrosion or high temperatures is required? - ANS Non-Ferrous Alloy. Which of the following is a type of gasket used in high-pressure systems? - ANS Metal Ring Joint. Examples of inactive cutting oil include all of the following EXCEPT: - ANS Sulfurized Mineral Oils. Which of the following thread sealant is MOST suitable for service temperatures of 500 to 700 degrees Fahrenheit? - ANS Graphite Paste. A System installed to provide protection of equipment from line-to-ground fault damage is called: - ANS Ground-Fault Circuit Interrupter (GFCI). Increasing the carbon content in steel results in an increase in: - ANS Hardness. The beveled edge of an orifice plate faces: - ANS Downstream. A bourdon tube is normally found inside a: - ANS Pressure Gauge. A loop sheet contains all of the following information EXEPT: - ANS Elevation of Instruments. A temperature-measuring device that operates on the principle that electrical resistance changes with temperature is a: - ANS Resistance Thermal Device (RTD) Capillary tubing with a bulb on the end is normally used on instruments that provide: - ANS Temperature Readings. A bourdon tube typically is used to measure: - ANS Pressure. What is the relationship of absolute pressure and gauge pressure? - ANS psia=psig+atmospheric pressure. Process flow drawings (PFDs) are used to: - ANS Aid in understanding the overall process. A Material Safety Data Sheet (MSDS) has all of the following sections EXCEPT: - ANS Disposal Contractors. Which of the following tools should be used to remove old packing from the packing gland? - ANS Packing Extractor. At high altitudes, the atmospheric pressure is: - ANS Lower than the atmospheric pressure at lower altitudes. Approximately what is the pressure, in psi, at the bottom of a 20-foot high tank filled with a fluid that has a specific gravity of 1.5? - ANS 13 PSI (62.43x20=1248.6 1248.6/144= 8.670 8.670x1.5= 13psi) The drawing that shows how similar devices are to be installed and connected an instrument: - ANS Detail Drawing. In bubbler system measuring level from the bottom to the top of the vessel the dip tube is installed in a vessel with its open end: - ANS Just above the bottom of the vessel. Which wiring diagram does NOT show discrete conductors from end to end, but in a bundle? - ANS Raceway Diagram. In modulating control the first step is to compute the error between controlled variable and set point. the second step is to produce an: - ANS Output Signal. When one controller is used to control two final elements, it is known as: - ANS Split Range. When used as a film between two surfaces, lubricants will reduce all of the following EXCEPT: - ANS Leakage. The letters "EL" on a blue print stands for: - ANS Elevation. When multiplying 47.1x7.2 then dividing the product by 11.23 the answer should have how many significant digits? - ANS 4. A proportional band of 100% is the equivalent to a gain of. - ANS 1. What type of instrument system uses feedback from a process to CORRECT change: - ANS Closed Loop.

Vista previa del contenido

Instrument tech V4 Test Questions Version
With Complete Solutions




A
R
U
LA
C
O
D

, A Technology bypassing conventional I/O by using direct communications between smart field
devices and associated control processors is: - ANS Fieldbus.

Redundant controllers in a distributed control system reside: - ANS As a hot standby at the
central processor.




A
The ultimate period method for tuning a controller was first proposed by: - ANS Ziegler and
Nichols.




R
One method of oxygen analysis focuses on the: - ANS Color Properties of Oxygen.

A piece of pipe has an AISI classification of A105, the major alloy is: - ANS Carbon.




U
Atmosphere testing must be conducted before entry into a confined space to check for: - ANS
Oxygen Content.
LA
Which of the following contains information about chemicals found on a job site? - ANS
Material Safety Data Sheet (MSDS).

Which of the following materials is selected when resistance to corrosion or high temperatures is
required? - ANS Non-Ferrous Alloy.
C

Which of the following is a type of gasket used in high-pressure systems? - ANS Metal
Ring Joint.

Examples of inactive cutting oil include all of the following EXCEPT: - ANS Sulfurized
O


Mineral Oils.

Which of the following thread sealant is MOST suitable for service temperatures of 500 to 700
D



degrees Fahrenheit? - ANS Graphite Paste.

A System installed to provide protection of equipment from line-to-ground fault damage is
called: - ANS Ground-Fault Circuit Interrupter (GFCI).

Increasing the carbon content in steel results in an increase in: - ANS Hardness.

The beveled edge of an orifice plate faces: - ANS Downstream.

A bourdon tube is normally found inside a: - ANS Pressure Gauge.

Información del documento

Subido en
23 de febrero de 2025
Número de páginas
11
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$11.89

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
DocLaura
4.2
(44)
Vendido
161
Seguidores
38
Artículos
6357
Última venta
2 meses hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes