TPC Basic Hydraulics Questions with Complete
Solutions| Latest Update
Which of the following kinds of vavles should be used in a hydraulic system to change the
directio of motion of the cylinder DCV
Surface filter media made of sintered metal powders are used in high pressure systems because
of their Thick mass
Temperature compensation vavles are usally equipped with an element that _______ as the
temperature rises expands
The best method of controlling hydraulic fluid contamination is the use of good
maintenance procedure
Which accumalator type is also used as a fluid intensifier Differential- piston
An air breather is installed on a fluid reservoir to vent the reservoir
Which of the following statements about hydraulic motors is true they are all positive
displacement type
A crescent shaped seperator is used on some ____ gear motor internal
, A 3 way valve is identified by its three paths or pilot lines
A strainer removes __________ particles than a filter. larger
When the maximum allowable pressure drop of a filter is reached, the filter will Allow
particles to pass through the medium
In addition to storing and releasing fluid, accumulators also absorb hydraulic shocks
Which part of a hydraulic system breaks up foam and separates dissolved air from the fluid?
Reservoir
The separation of contaminants from hydraulic fluid in a reservoir is aided by Slow fluid
movement
A vane pump with the rotor placed off-center is classified as a(n) __________ pump.
unbalanced
Which of the following is a disadvantage of using spur gears in an external gear pump?
suitable for only low speeds XXnot high speedsXX
Solutions| Latest Update
Which of the following kinds of vavles should be used in a hydraulic system to change the
directio of motion of the cylinder DCV
Surface filter media made of sintered metal powders are used in high pressure systems because
of their Thick mass
Temperature compensation vavles are usally equipped with an element that _______ as the
temperature rises expands
The best method of controlling hydraulic fluid contamination is the use of good
maintenance procedure
Which accumalator type is also used as a fluid intensifier Differential- piston
An air breather is installed on a fluid reservoir to vent the reservoir
Which of the following statements about hydraulic motors is true they are all positive
displacement type
A crescent shaped seperator is used on some ____ gear motor internal
, A 3 way valve is identified by its three paths or pilot lines
A strainer removes __________ particles than a filter. larger
When the maximum allowable pressure drop of a filter is reached, the filter will Allow
particles to pass through the medium
In addition to storing and releasing fluid, accumulators also absorb hydraulic shocks
Which part of a hydraulic system breaks up foam and separates dissolved air from the fluid?
Reservoir
The separation of contaminants from hydraulic fluid in a reservoir is aided by Slow fluid
movement
A vane pump with the rotor placed off-center is classified as a(n) __________ pump.
unbalanced
Which of the following is a disadvantage of using spur gears in an external gear pump?
suitable for only low speeds XXnot high speedsXX
