HAZWOPER 40: Lesson 8 Quiz
1. What is the best way for employees to verify the functionality of PPE
program at a workplace?:
Check if the written PPE plan document covers necessary requirements and verify the
date of its most recent review.
2. Work activities should be studied to determine the degree of dexterity
required, the duration, frequency, degree of exposure, and the (blank)
involved.: Physical stress
3. Which class of helmets is made of aluminum that conducts electricity and,
therefore, should not be worn near electrical hazards?: Class C
4. Which assessment must be performed by the employers to determine the
necessity for PPE?: Hazard assessment
5. Which class of helmets provides impact and penetration as well as electrical
protection from low-voltage conductors?: Class A
6. Class E helmets provide electrical protection from high-voltage conductors
and are proof tested to how many volts?: 20,000 volts
7. What must be provided, used, and maintained to protect employees from
workplace hazards?:
Protective equipment
8. No clothing material protects against all chemicals. When working with
chemical mixtures, a glove should be chosen on the basis of its::
Permeation rate and breakthrough time
9. Employees must remove their gloves in such a manner as to prevent
what?-:
Skin contamination
10. What are the symptoms of heat stroke?:
Very small pupils, confusion, unconsciousness, and a very high body temperature
1/1
1. What is the best way for employees to verify the functionality of PPE
program at a workplace?:
Check if the written PPE plan document covers necessary requirements and verify the
date of its most recent review.
2. Work activities should be studied to determine the degree of dexterity
required, the duration, frequency, degree of exposure, and the (blank)
involved.: Physical stress
3. Which class of helmets is made of aluminum that conducts electricity and,
therefore, should not be worn near electrical hazards?: Class C
4. Which assessment must be performed by the employers to determine the
necessity for PPE?: Hazard assessment
5. Which class of helmets provides impact and penetration as well as electrical
protection from low-voltage conductors?: Class A
6. Class E helmets provide electrical protection from high-voltage conductors
and are proof tested to how many volts?: 20,000 volts
7. What must be provided, used, and maintained to protect employees from
workplace hazards?:
Protective equipment
8. No clothing material protects against all chemicals. When working with
chemical mixtures, a glove should be chosen on the basis of its::
Permeation rate and breakthrough time
9. Employees must remove their gloves in such a manner as to prevent
what?-:
Skin contamination
10. What are the symptoms of heat stroke?:
Very small pupils, confusion, unconsciousness, and a very high body temperature
1/1
