NWSA TTT-2 Exam Questions and Answers Latest Update 2025 Graded A+
When is a High-Visibility Vest required? - Answers When in a public easement.
How long after welding is completed does a spotter have to monitor a site for fires? - Answers 1 hour.
Which of the options will not prevent a fire while welding in a fire prone area? - Answers Chipping Slag.
How is an exothermic weld performed? - Answers By an oxyacetylene torch
What is a structural member of a monopole? - Answers Base Flange
Can the WLL of a rigging system ever be exceeded? - Answers No.
Who can communicate with a helicopter pilot? - Answers Competent designated person.
What is the load of 3 people tied off to a single point? - Answers 15,000 lbs
If a Crane has a WLL of 6000 lbs and the headache ball is 300 lbs, what does that make the WLL? -
Answers 5,700 lbs.
What do you do if a synthetic sling has been burned? - Answers Remove from service.
When is it acceptable to tie a knot in a sling to make is shorter? - Answers Never.
When crane boom is at 45 degrees, what will happen if you signal cable up? (this is one of the picture
questions) - Answers The load will raise.
When is it okay to modify a harness? - Answers Never.
When crane boom is at 45 degrees, what will happen if you signal boom up? (this is one of the picture
questions) - Answers The load will raise and the radius will be reduced.
What is the class plan for demolishing a tower? - Answers Class IV
With a 8ft ground rod, what is minimum distance they should be apart? - Answers 20 ft apart.
How much galvanization should be removed while preparing for a weld? - Answers 100%.
Which is used for performance testing fiber optic cable? - Answers OTDR
Which of these is not used to test COAX cable? - Answers OTDR
How many grounds should be placed on a 425 foot coax cable? - Answers 3.
How many transits are needed for a 3 leg guy tower? - Answers 2 at 90 degrees.
Which is not a method to test guy wire tension? - Answers Turnbuckle.
When is a High-Visibility Vest required? - Answers When in a public easement.
How long after welding is completed does a spotter have to monitor a site for fires? - Answers 1 hour.
Which of the options will not prevent a fire while welding in a fire prone area? - Answers Chipping Slag.
How is an exothermic weld performed? - Answers By an oxyacetylene torch
What is a structural member of a monopole? - Answers Base Flange
Can the WLL of a rigging system ever be exceeded? - Answers No.
Who can communicate with a helicopter pilot? - Answers Competent designated person.
What is the load of 3 people tied off to a single point? - Answers 15,000 lbs
If a Crane has a WLL of 6000 lbs and the headache ball is 300 lbs, what does that make the WLL? -
Answers 5,700 lbs.
What do you do if a synthetic sling has been burned? - Answers Remove from service.
When is it acceptable to tie a knot in a sling to make is shorter? - Answers Never.
When crane boom is at 45 degrees, what will happen if you signal cable up? (this is one of the picture
questions) - Answers The load will raise.
When is it okay to modify a harness? - Answers Never.
When crane boom is at 45 degrees, what will happen if you signal boom up? (this is one of the picture
questions) - Answers The load will raise and the radius will be reduced.
What is the class plan for demolishing a tower? - Answers Class IV
With a 8ft ground rod, what is minimum distance they should be apart? - Answers 20 ft apart.
How much galvanization should be removed while preparing for a weld? - Answers 100%.
Which is used for performance testing fiber optic cable? - Answers OTDR
Which of these is not used to test COAX cable? - Answers OTDR
How many grounds should be placed on a 425 foot coax cable? - Answers 3.
How many transits are needed for a 3 leg guy tower? - Answers 2 at 90 degrees.
Which is not a method to test guy wire tension? - Answers Turnbuckle.
