Defense Basic Preservation and
Packing Actual Exam
Questions With Reviewed 100%
Correct Detailed Answers
Guaranteed Pass!!
1. Which cushioning method is often used for consumer electronic items
when a full floated package is not cost-effective? - ANSWER side pads
2. Which marking identifies the military shipment label (MSL)?
- ANSWER C
3. Which publication provides general standards for outer container
markings? - ANSWER MIL-STD-129
4. Which marking is NOT included on the outer container label? - ANSWER
item nomenclature
5. You are shipping a large DoD container. What special tagging is required for
global tracking? - ANSWER Radio Frequency Identification (RFID)
6. What special marking uses a three-position alphanumeric code to expedite
critical shipments? - ANSWER Project Code
,7. Which bar code must include human-readable interpretation (HRI)
markings? - ANSWER Linear Bar Code
8. The labels shown here provide guidance on a shipment's specific handling
needs. They are known as - ANSWER Special markings
9. What is the most common size of a pallet? - ANSWER 40 x 48 inches
10.Which of these is a 4-way entry, double wing, stringer pallet? - ANSWER
the lighter one with the edges hanging over
11.Which of these is a 2-way entry, double wing, blocked pallet? - ANSWER
the darker one with the edges hanging over
12.Which of these is a 4-way entry, flush, stringer pallet? - ANSWER the
darker one that is flush
13.Which of these is a 2-way entry, blocked pallet? - ANSWER the lighter
one that is flush
14.Which publication contains the military standards for pallets and
palletization? - ANSWER MIL-STD-147
15.You are loading a pallet. Where do you look up the load pattern? -
ANSWER MIL-STD-147, Appendix B
, 16.You are loading a pallet and need to determine its load pattern. Which two
container measurements do you need in order to locate the load pattern
number in MIL-STD-147 Table B-I? - ANSWER Length and width
17.Areas shaded black on a load pattern represent empty areas that -
ANSWER must be filled with stability dunnage
18.Which of these pallet loads has an overhang? - ANSWER the one with
the black cylinders
19.Which of these images shows edge protectors? - ANSWER the one with
the white protectors
20.Which of these images shows a collar? - ANSWER the orange tubes
21.You are loading a pallet. Where do you look up load type and its preferred
stability dunnage and bonding method? - ANSWER MIL-STD-147,
Appendix A
22.Which of the following bonding methods secures the load to the pallet? -
ANSWER Method D: Tie-down straps
23.A palletized load weighs 600 pounds and requires 6 tie-down straps. To
keep the load from falling apart during handling and transit, you must use
strapping material with a breaking strength of at least - ANSWER 100
pounds
Packing Actual Exam
Questions With Reviewed 100%
Correct Detailed Answers
Guaranteed Pass!!
1. Which cushioning method is often used for consumer electronic items
when a full floated package is not cost-effective? - ANSWER side pads
2. Which marking identifies the military shipment label (MSL)?
- ANSWER C
3. Which publication provides general standards for outer container
markings? - ANSWER MIL-STD-129
4. Which marking is NOT included on the outer container label? - ANSWER
item nomenclature
5. You are shipping a large DoD container. What special tagging is required for
global tracking? - ANSWER Radio Frequency Identification (RFID)
6. What special marking uses a three-position alphanumeric code to expedite
critical shipments? - ANSWER Project Code
,7. Which bar code must include human-readable interpretation (HRI)
markings? - ANSWER Linear Bar Code
8. The labels shown here provide guidance on a shipment's specific handling
needs. They are known as - ANSWER Special markings
9. What is the most common size of a pallet? - ANSWER 40 x 48 inches
10.Which of these is a 4-way entry, double wing, stringer pallet? - ANSWER
the lighter one with the edges hanging over
11.Which of these is a 2-way entry, double wing, blocked pallet? - ANSWER
the darker one with the edges hanging over
12.Which of these is a 4-way entry, flush, stringer pallet? - ANSWER the
darker one that is flush
13.Which of these is a 2-way entry, blocked pallet? - ANSWER the lighter
one that is flush
14.Which publication contains the military standards for pallets and
palletization? - ANSWER MIL-STD-147
15.You are loading a pallet. Where do you look up the load pattern? -
ANSWER MIL-STD-147, Appendix B
, 16.You are loading a pallet and need to determine its load pattern. Which two
container measurements do you need in order to locate the load pattern
number in MIL-STD-147 Table B-I? - ANSWER Length and width
17.Areas shaded black on a load pattern represent empty areas that -
ANSWER must be filled with stability dunnage
18.Which of these pallet loads has an overhang? - ANSWER the one with
the black cylinders
19.Which of these images shows edge protectors? - ANSWER the one with
the white protectors
20.Which of these images shows a collar? - ANSWER the orange tubes
21.You are loading a pallet. Where do you look up load type and its preferred
stability dunnage and bonding method? - ANSWER MIL-STD-147,
Appendix A
22.Which of the following bonding methods secures the load to the pallet? -
ANSWER Method D: Tie-down straps
23.A palletized load weighs 600 pounds and requires 6 tie-down straps. To
keep the load from falling apart during handling and transit, you must use
strapping material with a breaking strength of at least - ANSWER 100
pounds
