1
REP 1- REP 2 EXAM EXAM QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) ||ALREADY GRADED A+||NEWEST
VERSION
Quiz: When light strikes a medium at an angle less than the critical
angle, what happens to the light?
Ans: It is reflected
Quiz: In a fiber optic cable, what is the purpose of the cladding?
Ans: To guide the light down the fiber
Quiz: You are planning a fiber optic network and want to amplify
the signal so you can send it farther into the field. At which
wavelength must the laser emit?
Ans: 1550 nm
o
o
© 2025 TestTrackers
WhatsApp or call o Resources & Updates: [Testtrackers - Stuvia US]
o Your Success is Our Mission!
[+ 254707240657]
o For online exams and tutor expert, please
whatsapp me in the number given.
, Testtrackers
2
Quiz: It is important to follow safety procedures when installing and
handling fiber optic cable. What should you use to pick up fiber
pieces after you splice a cable?
Ans: Tweezers
Quiz: You are doing an aerial installation of fiber optic cable. When
you survey the installation path, you see that the path runs near
several short outbuildings and over a series of hedges. Which
installation method should you use?
Ans: The pull in method
Quiz: Poor performance in the fiber optic network leads you to
believe that there is a fault in the fiber optic cable and you want to
test a section of the network with an optical time domain
reflectometer OTDR, How should you connect the OTDR to the
fiber optic cable?
o
o
© 2025 TestTrackers
WhatsApp or call o Resources & Updates: [Testtrackers - Stuvia US]
o Your Success is Our Mission!
[+ 254707240657]
o For online exams and tutor expert, please
whatsapp me in the number given.
, Testtrackers
3
Ans: With an optical mechanical splice
Quiz: As you prepare to set up the fiber optic network, you realize
you need a coupler that will allow any of its ports to be used as
either input or output. Which coupler should you choose?
Ans: A reflective star coupler
Quiz: As cable companies have expanded their use of fiber optic
cable, they have also brought it closer to the customer premises,
increasing the bandwidth available to customers. Which answer
below represents the progression of fiber optic network
architecture?
Ans: Fiber to the feeder *FTTF* - Fiber to the neighborhood *FTTN* - Fiber to
the curb *FTTC* - and Fiber to the home *FTTH*
Quiz: Why is the broadband cable industry developing its own
passive optical network (PON) standard instead of using standards
o
o
© 2025 TestTrackers
WhatsApp or call o Resources & Updates: [Testtrackers - Stuvia US]
o Your Success is Our Mission!
[+ 254707240657]
o For online exams and tutor expert, please
whatsapp me in the number given.
, Testtrackers
4
already developed by the International Telecommunication Union
(ITU) and the Institute of Electrical and Electronics Engineers (IEEE)
Ans: The industry has invested a lot of money in HFC Networks, Data Over
Cable Service Interface Specification, and other systems and devices that are
still currently being used, but they are not compatible with ITU and IEEE PON
standards.
Quiz: What serves as an amplifier in fiber optic networks, allowing
light signals to travel farther while retaining signal strength?
Ans: EDFA, An erbium-doped fiber amplifier
Quiz: What is the name of the group that established standards for
the television industry, ensuring a single system would deliver
consistent service across the nation?
Ans: The National Television System Committee (NTSC)
o
o
© 2025 TestTrackers
WhatsApp or call o Resources & Updates: [Testtrackers - Stuvia US]
o Your Success is Our Mission!
[+ 254707240657]
o For online exams and tutor expert, please
whatsapp me in the number given.