HAZMAT OPS TEST PREP EXAM 2025 WITH ZERO ERRORS IN SOLUTIONS.
Substances or materials in quantities or forms that may pose an unreasonable risk to
health safety, or property when transported, stored, or used in commerce is the
definition of a:
-Hazard Class
-Hazardous Chemical
-Hazardous Material
-Hazardous Substance - ANSWER Hazardous Material
Federal OSHA (#'s crossed out) and several states have required that local
establishments keep on file a Material Safety Data Sheet when:
-Wood products are used
-Personnel have not received specialized hazmat training
-Hazardous materials are used or stored on site
-Backup emergency power is not available - ANSWER Hazardous materials are
used or stored on site
The information paper developed by the manufacturer listing specific hazards of a
product is called:
-The Emergency Response Guidebook
-CHEMTREK
-The NFPA 704 System
-Materials Safety Data Sheet - ANSWER Material Safety Data Sheet
A major difference between a hazardous materials incident and other types of
emergencies is the fact that hazmat incidents:
-can be more complex
-occur less frequently
-occur more frequently
-occur in specific locations - ANSWER Can be more complex
The DOT hazard Class 8 consists of:
-Flammable liquids
-Explosives
-Corrosives
-Poisons - ANSWER Corrosives
The primary hazard of a DOT hazard class 5 material is:
-Radiation
-Oxidation
-Spontaneously combustible
-Poison - ANSWER Oxidation
A cylinder should be considered dangerous regardless of what type of hazardous
material it contains because the contents are:
-Flammable
-Pressurized
-Toxic
-Asphyxiating - ANSWER Pressurized
The four digit number appearing on a placard or an orange panel of a tank car is the:
,HAZMAT OPS TEST PREP EXAM 2025 WITH ZERO ERRORS IN SOLUTIONS.
-UN product identification number
-Capacity of the tank car
-Last date the tank car was pressure tested
-Tank car registration number - ANSWER UN product Identification number
The NFPA 704 system for identifying hazardous materials gives:
-General hazard and degree of severity
-Specific product identification
-The DOT hazard class
-The UN hazard class - ANSWER General hazard and degree of severity
A number 4 in the blue quadrant of the NFPA 704 system indicates that there is
_______ ris in this caregory from the chemical involved:
-Great
-A slight
-No
-Moderate - ANSWER Great
The white quadrant of the NFPA 704 system is used to indicate:
-Health Hazards
-Flammability
-Additional Information
-Reactivity - ANSWER Additional Information
The fact that a product is water reactive would be indicated in the ______ quadrant
of the NFPA 704 system:
-Blue
-Red
-White
-Yellow - ANSWER White
The type of hazardous material identification method required for shipping some
products over 1001 pounds is the:
-DOT system
-Labeling method
-NFPA 704 Method
-Stamping method - ANSWER DOT system
Placards or labels indicate general hazard recognition by:
-The numbers 0-4 indicating relative risk
-Always indicating the product by name
-Giving the UN hazard class number
-the number in the bottom quadrant on the diamond - ANSWER Giving the UN
hazard class number
A Bill of Lading contains valuable information about the origin of the product and is
the type of shipping paper used when transporting product via:
-Truck
-Railway Car
-Barge
, HAZMAT OPS TEST PREP EXAM 2025 WITH ZERO ERRORS IN SOLUTIONS.
-Aircraft - ANSWER Truck
Care and Control of the Waybill/consist is the responsibility of the:
-Truck driver
-Train conductor/engineer
-Ship captain or master
-Aircraft pilot - ANSWER Train Conductor/Engineer
The normal location for the Bill of Lading is in the:
-Wheelhouse
-Cockpit
-Conductor's possession
-Cab of the truck - ANSWER Cab of the truck
During an incident involving a train, you should look for the shipping papers in any of
the following EXCEPT:
-Engine or Caboose
-Conductor's Possession
-Rail cars carrying the products
-Engineers Possession - ANSWER Rail cars carrying the products
Using the human senses of smell or taste to determine the presence of a hazardous
material is:
-The best first step
-Not reliable if the product is heavier than air
-Unreliable, unacceptable, and unsafe
-Recommended unless you have a head cold - ANSWER Unreliable, Unacceptable,
and Unsafe
Hazardous occupancies and problem locations should be identified and evaluated:
-En route to an emergency
-During preincident planning
-During training sessions
-At least once a year - ANSWER During preincident planning
Local emergency response personnel can avoid considerable confusion if the
______ is utilized in preincident planning:
-ERG
-MSDS
-Shipping Paper
-Bill of Lading - ANSWER MSDS
True or False-Shipping papers will contain an entry for Hazard classification
according to DOT regulations. - ANSWER True
Which of the following should be found on shiping papers when transporting
hazardous material?
-UN identification number
-Proper name of the shipped materials
-Hazard class of shipment
Substances or materials in quantities or forms that may pose an unreasonable risk to
health safety, or property when transported, stored, or used in commerce is the
definition of a:
-Hazard Class
-Hazardous Chemical
-Hazardous Material
-Hazardous Substance - ANSWER Hazardous Material
Federal OSHA (#'s crossed out) and several states have required that local
establishments keep on file a Material Safety Data Sheet when:
-Wood products are used
-Personnel have not received specialized hazmat training
-Hazardous materials are used or stored on site
-Backup emergency power is not available - ANSWER Hazardous materials are
used or stored on site
The information paper developed by the manufacturer listing specific hazards of a
product is called:
-The Emergency Response Guidebook
-CHEMTREK
-The NFPA 704 System
-Materials Safety Data Sheet - ANSWER Material Safety Data Sheet
A major difference between a hazardous materials incident and other types of
emergencies is the fact that hazmat incidents:
-can be more complex
-occur less frequently
-occur more frequently
-occur in specific locations - ANSWER Can be more complex
The DOT hazard Class 8 consists of:
-Flammable liquids
-Explosives
-Corrosives
-Poisons - ANSWER Corrosives
The primary hazard of a DOT hazard class 5 material is:
-Radiation
-Oxidation
-Spontaneously combustible
-Poison - ANSWER Oxidation
A cylinder should be considered dangerous regardless of what type of hazardous
material it contains because the contents are:
-Flammable
-Pressurized
-Toxic
-Asphyxiating - ANSWER Pressurized
The four digit number appearing on a placard or an orange panel of a tank car is the:
,HAZMAT OPS TEST PREP EXAM 2025 WITH ZERO ERRORS IN SOLUTIONS.
-UN product identification number
-Capacity of the tank car
-Last date the tank car was pressure tested
-Tank car registration number - ANSWER UN product Identification number
The NFPA 704 system for identifying hazardous materials gives:
-General hazard and degree of severity
-Specific product identification
-The DOT hazard class
-The UN hazard class - ANSWER General hazard and degree of severity
A number 4 in the blue quadrant of the NFPA 704 system indicates that there is
_______ ris in this caregory from the chemical involved:
-Great
-A slight
-No
-Moderate - ANSWER Great
The white quadrant of the NFPA 704 system is used to indicate:
-Health Hazards
-Flammability
-Additional Information
-Reactivity - ANSWER Additional Information
The fact that a product is water reactive would be indicated in the ______ quadrant
of the NFPA 704 system:
-Blue
-Red
-White
-Yellow - ANSWER White
The type of hazardous material identification method required for shipping some
products over 1001 pounds is the:
-DOT system
-Labeling method
-NFPA 704 Method
-Stamping method - ANSWER DOT system
Placards or labels indicate general hazard recognition by:
-The numbers 0-4 indicating relative risk
-Always indicating the product by name
-Giving the UN hazard class number
-the number in the bottom quadrant on the diamond - ANSWER Giving the UN
hazard class number
A Bill of Lading contains valuable information about the origin of the product and is
the type of shipping paper used when transporting product via:
-Truck
-Railway Car
-Barge
, HAZMAT OPS TEST PREP EXAM 2025 WITH ZERO ERRORS IN SOLUTIONS.
-Aircraft - ANSWER Truck
Care and Control of the Waybill/consist is the responsibility of the:
-Truck driver
-Train conductor/engineer
-Ship captain or master
-Aircraft pilot - ANSWER Train Conductor/Engineer
The normal location for the Bill of Lading is in the:
-Wheelhouse
-Cockpit
-Conductor's possession
-Cab of the truck - ANSWER Cab of the truck
During an incident involving a train, you should look for the shipping papers in any of
the following EXCEPT:
-Engine or Caboose
-Conductor's Possession
-Rail cars carrying the products
-Engineers Possession - ANSWER Rail cars carrying the products
Using the human senses of smell or taste to determine the presence of a hazardous
material is:
-The best first step
-Not reliable if the product is heavier than air
-Unreliable, unacceptable, and unsafe
-Recommended unless you have a head cold - ANSWER Unreliable, Unacceptable,
and Unsafe
Hazardous occupancies and problem locations should be identified and evaluated:
-En route to an emergency
-During preincident planning
-During training sessions
-At least once a year - ANSWER During preincident planning
Local emergency response personnel can avoid considerable confusion if the
______ is utilized in preincident planning:
-ERG
-MSDS
-Shipping Paper
-Bill of Lading - ANSWER MSDS
True or False-Shipping papers will contain an entry for Hazard classification
according to DOT regulations. - ANSWER True
Which of the following should be found on shiping papers when transporting
hazardous material?
-UN identification number
-Proper name of the shipped materials
-Hazard class of shipment
