CA BRANCH 3 PRACTICE TEST (ACTUAL 2025)
Which termite has secondary queens? -
<<<Answers>>>Subterranean Termite
Which signal word will be associated with a pesticide that had
a LD-50 value of 350? - <<<Answers>>>Warning
What termite swarmers are all black and have pale white
translucent wings? - <<<Answers>>>Subterranean Termite
Under the definition of Structural pest control, which of the
following sites applies? - <<<Answers>>>Rail road cars
What does the adult stage of the Carpenter Bee eat? -
<<<Answers>>>Pollen and nectar
Chemical storage areas shall be posted with warning signs
that are readable from? - <<<Answers>>>25 feet
IPM programs consist of what four basic tasks? -
<<<Answers>>>Inspection, eliminating conducive
conditions, treatment, and monitoring
Which members of the board does the Governor appoint? -
<<<Answers>>>Two public members, and three industry
members
, CA BRANCH 3 PRACTICE TEST (ACTUAL 2025)
Completion tags must be posted in what location? -
<<<Answers>>>Next to the Inspection tag
How many days from their hiring date can an unlicensed
individual legally apply pesticides and/or rodenticides as long
as they are applied under the direct control of a field
representative or an operator? - <<<Answers>>>30 days
How long can board members serve on the Structural Pest
Control Board? - <<<Answers>>>Two, four year terms
Stronger concrete can be produced by doing what? -
<<<Answers>>>Using less water
Which is not a characteristic of a Carpenter Bee? -
<<<Answers>>>Social insect
A scaffolding platform plank minimum size is? -
<<<Answers>>>2x10
Copies of reports must be kept for what length of time? -
<<<Answers>>>3 years
, CA BRANCH 3 PRACTICE TEST (ACTUAL 2025)
What par of a structure do girders usually support? -
<<<Answers>>>Floor joist
Each riser should be no more than how many inches high? -
<<<Answers>>>8 1/4 inches
Stringers are typically made of which type of material? -
<<<Answers>>>2x12
The height of a riser is called the unit rise, so the sum of all
risers would be the _________________ -
<<<Answers>>>Total Rise
You must have at least how much head room? -
<<<Answers>>>6 foot, 8 inches
The width of a tread is called the unit run, so the sum of all
the treads would be the _______________ -
<<<Answers>>>Total Run
What is the maximum amount of difference allowed between
the heights of risers? - <<<Answers>>>1/4 inch
The minimum size of a stairway landing is ____________ -
<<<Answers>>>4 foot x 6 foot
Which termite has secondary queens? -
<<<Answers>>>Subterranean Termite
Which signal word will be associated with a pesticide that had
a LD-50 value of 350? - <<<Answers>>>Warning
What termite swarmers are all black and have pale white
translucent wings? - <<<Answers>>>Subterranean Termite
Under the definition of Structural pest control, which of the
following sites applies? - <<<Answers>>>Rail road cars
What does the adult stage of the Carpenter Bee eat? -
<<<Answers>>>Pollen and nectar
Chemical storage areas shall be posted with warning signs
that are readable from? - <<<Answers>>>25 feet
IPM programs consist of what four basic tasks? -
<<<Answers>>>Inspection, eliminating conducive
conditions, treatment, and monitoring
Which members of the board does the Governor appoint? -
<<<Answers>>>Two public members, and three industry
members
, CA BRANCH 3 PRACTICE TEST (ACTUAL 2025)
Completion tags must be posted in what location? -
<<<Answers>>>Next to the Inspection tag
How many days from their hiring date can an unlicensed
individual legally apply pesticides and/or rodenticides as long
as they are applied under the direct control of a field
representative or an operator? - <<<Answers>>>30 days
How long can board members serve on the Structural Pest
Control Board? - <<<Answers>>>Two, four year terms
Stronger concrete can be produced by doing what? -
<<<Answers>>>Using less water
Which is not a characteristic of a Carpenter Bee? -
<<<Answers>>>Social insect
A scaffolding platform plank minimum size is? -
<<<Answers>>>2x10
Copies of reports must be kept for what length of time? -
<<<Answers>>>3 years
, CA BRANCH 3 PRACTICE TEST (ACTUAL 2025)
What par of a structure do girders usually support? -
<<<Answers>>>Floor joist
Each riser should be no more than how many inches high? -
<<<Answers>>>8 1/4 inches
Stringers are typically made of which type of material? -
<<<Answers>>>2x12
The height of a riser is called the unit rise, so the sum of all
risers would be the _________________ -
<<<Answers>>>Total Rise
You must have at least how much head room? -
<<<Answers>>>6 foot, 8 inches
The width of a tread is called the unit run, so the sum of all
the treads would be the _______________ -
<<<Answers>>>Total Run
What is the maximum amount of difference allowed between
the heights of risers? - <<<Answers>>>1/4 inch
The minimum size of a stairway landing is ____________ -
<<<Answers>>>4 foot x 6 foot
