OSHA Basic Orientation Plus Test | Questions with 100%
Correct Answers | Verified | Updated
The OSHA standard that addresses the requirements for preventing and lessening
the results of a bad release of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process - ANSWER -Process safety management
Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they
are - ANSWER -Evaluated, Controlled, and Identified
In the PSM standard OSHA states employees must be trained if they work with
highly hazardous chemicals. - ANSWER -True
Facilities are not permitted to control your entrance and exit in covered process
areas. - ANSWER -False
What should be your first concern from the moment you enter the work site? -
ANSWER -Safety
Under the Stop Work Authority, you have the right and obligation to stop a work
activity if you have reason to believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established or understood . - ANSWER -
True
What's needed in order to operate a plant-owned vehicle or mobile equipment
while at a facility - ANSWER -qualified only authorized only
What type of work permits you may encounter on the job - ANSWER -safe work
permits confined space entry permits, hot work permits, line entry or line breaking
permits, lockout/tagout permits
, if you are replacing a piece of equipment the new one should be the same as the
one being removed. If its not you should find out whether the change was on
purpose. what is this called - ANSWER -Management of change
Used only where an immediate life threatening hazard exists - ANSWER -Danger
Used where immediate non life threatening hazards exist - ANSWER -Warning
Sign
Used to warn against potential hazards or to caution against unsafe practices -
ANSWER -Caution signs
Physical devices that are designed to prevent entry into an area where hazards are
present. - ANSWER -Barriers
Obstacles that discourage the passage of persons or vehicles - ANSWER -
Barricade
When lifting or setting down a load, bend at the - ANSWER -Knees
What is the most frequently cited OSHA violation? - ANSWER -Fall Protection
What key elements are essential to recognizing hazards and reducing or
eliminating workplace hazards? - ANSWER -Management commitment and
employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever
you have a problem or are in doubt about what to do on a job? - ANSWER -True
It is your responsibility to follow all safety regulations, inform your employer of
any unsafe condition; report all injuries no matter how minor they seem and wear
the proper personal protective equipment? - ANSWER -True
If you experience pain or discomfort as a result of your work activities, you should
do what? - ANSWER -report it to your supervisor as soon as possible
Correct Answers | Verified | Updated
The OSHA standard that addresses the requirements for preventing and lessening
the results of a bad release of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process - ANSWER -Process safety management
Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they
are - ANSWER -Evaluated, Controlled, and Identified
In the PSM standard OSHA states employees must be trained if they work with
highly hazardous chemicals. - ANSWER -True
Facilities are not permitted to control your entrance and exit in covered process
areas. - ANSWER -False
What should be your first concern from the moment you enter the work site? -
ANSWER -Safety
Under the Stop Work Authority, you have the right and obligation to stop a work
activity if you have reason to believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established or understood . - ANSWER -
True
What's needed in order to operate a plant-owned vehicle or mobile equipment
while at a facility - ANSWER -qualified only authorized only
What type of work permits you may encounter on the job - ANSWER -safe work
permits confined space entry permits, hot work permits, line entry or line breaking
permits, lockout/tagout permits
, if you are replacing a piece of equipment the new one should be the same as the
one being removed. If its not you should find out whether the change was on
purpose. what is this called - ANSWER -Management of change
Used only where an immediate life threatening hazard exists - ANSWER -Danger
Used where immediate non life threatening hazards exist - ANSWER -Warning
Sign
Used to warn against potential hazards or to caution against unsafe practices -
ANSWER -Caution signs
Physical devices that are designed to prevent entry into an area where hazards are
present. - ANSWER -Barriers
Obstacles that discourage the passage of persons or vehicles - ANSWER -
Barricade
When lifting or setting down a load, bend at the - ANSWER -Knees
What is the most frequently cited OSHA violation? - ANSWER -Fall Protection
What key elements are essential to recognizing hazards and reducing or
eliminating workplace hazards? - ANSWER -Management commitment and
employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever
you have a problem or are in doubt about what to do on a job? - ANSWER -True
It is your responsibility to follow all safety regulations, inform your employer of
any unsafe condition; report all injuries no matter how minor they seem and wear
the proper personal protective equipment? - ANSWER -True
If you experience pain or discomfort as a result of your work activities, you should
do what? - ANSWER -report it to your supervisor as soon as possible
