Construction Technology Final EXAM
questions with complete solutions
Most interior doors are manufactured in a thickness of - correct answer ✔✔1 3/8"
Interior doors usually range from 1'-0" to - correct answer ✔✔3'-0
Not providing full access to an opening is a disadvantage of a _____ door type - correct answer
✔✔Bypass
_____ is used extensively for flush door skins - correct answer ✔✔Laun Plywood
If the plain door stock is 3/4" thick, then the rough opening for the door should be the width of the door
plus____" - correct answer ✔✔2 1/2"
When setting an interior door frame, it is best to do all the following EXCEPT - correct answer ✔✔attach
the frame with duplex nails
An accurate and fast method of plumbing side jambs of a door frame is to use a - correct answer ✔✔6'
level
All the following door except require a track attached to head jamb - correct answer ✔✔swinging doors
Bed, crown, and cove moldings are used frequently as - correct answer ✔✔ceiling trim
A stool is part of the - correct answer ✔✔window trim
A _____ joint is considered the best joint to use when trimming the outside corners - correct answer
✔✔mitered
, Crown molding is manufactured and installed at a ____ degree angle - correct answer ✔✔38
The setback of casing (trim) from the face of the door or window jambs is often referred to as - correct
answer ✔✔Reveal
Wall units, upper cabinets, are installed about____ inches above the counter top - correct answer ✔✔18
The most common height of the counter top is_____ from the floor - correct answer ✔✔36"
There are several different heights of wall cabinets, but a standard wall cabinet height is - correct answer
✔✔36"
A cabinet door front that is rabbited on its edges and ends are called____ type - correct answer
✔✔Lipped
An offset hinge is used on_____ door - correct answer ✔✔Overlay
Butt hinges are used on_____ - correct answer ✔✔Flush
A _____ joint is used on high quality drawer boxes - correct answer ✔✔dovetail
The popular size of hardwood strip flooring is ____" thick with a face width of 2 1/4" - correct answer
✔✔3/4
On the prefinished hardwood strip flooring, a _____ is machined between the face sided edges of
flooring prior to prefinishing - correct answer ✔✔Chamfer
Laminated strip flooring is a _____ prefinished wood assembly - correct answer ✔✔three-ply
questions with complete solutions
Most interior doors are manufactured in a thickness of - correct answer ✔✔1 3/8"
Interior doors usually range from 1'-0" to - correct answer ✔✔3'-0
Not providing full access to an opening is a disadvantage of a _____ door type - correct answer
✔✔Bypass
_____ is used extensively for flush door skins - correct answer ✔✔Laun Plywood
If the plain door stock is 3/4" thick, then the rough opening for the door should be the width of the door
plus____" - correct answer ✔✔2 1/2"
When setting an interior door frame, it is best to do all the following EXCEPT - correct answer ✔✔attach
the frame with duplex nails
An accurate and fast method of plumbing side jambs of a door frame is to use a - correct answer ✔✔6'
level
All the following door except require a track attached to head jamb - correct answer ✔✔swinging doors
Bed, crown, and cove moldings are used frequently as - correct answer ✔✔ceiling trim
A stool is part of the - correct answer ✔✔window trim
A _____ joint is considered the best joint to use when trimming the outside corners - correct answer
✔✔mitered
, Crown molding is manufactured and installed at a ____ degree angle - correct answer ✔✔38
The setback of casing (trim) from the face of the door or window jambs is often referred to as - correct
answer ✔✔Reveal
Wall units, upper cabinets, are installed about____ inches above the counter top - correct answer ✔✔18
The most common height of the counter top is_____ from the floor - correct answer ✔✔36"
There are several different heights of wall cabinets, but a standard wall cabinet height is - correct answer
✔✔36"
A cabinet door front that is rabbited on its edges and ends are called____ type - correct answer
✔✔Lipped
An offset hinge is used on_____ door - correct answer ✔✔Overlay
Butt hinges are used on_____ - correct answer ✔✔Flush
A _____ joint is used on high quality drawer boxes - correct answer ✔✔dovetail
The popular size of hardwood strip flooring is ____" thick with a face width of 2 1/4" - correct answer
✔✔3/4
On the prefinished hardwood strip flooring, a _____ is machined between the face sided edges of
flooring prior to prefinishing - correct answer ✔✔Chamfer
Laminated strip flooring is a _____ prefinished wood assembly - correct answer ✔✔three-ply
