QA Craftsman Test CORRECT 100%
QAC-001 2: What is a formal work package (FWP)? What is a controlled work
package(CWP)? - ANSWERFWP Coordinates in a single document materials
required, initial conditions, MP, test inspections and system restoration for the
selected maintenance task.
CWP is required when higher authority requires a record of repairs, maintenance for
fabrication, repair, installation, inspection and testing process for specific systems or
components
QAC-004 2: List the responsibilities of a craftsman at a FMA. - ANSWERA. Perform
all maintenance actions following the CWP.
B. Ensure QA forms associated with the maintenance are correctly completed as
required by the applicable sections of this volume.
C. Enter signature, printed name and date on all QA data forms completed.
D. Ensure only TDME which has current calibration stickers with records attached or
available is used for production.
QAC-005 2: Define Objective Quality Evidence. - ANSWERAny statement of fact,
either quantitative or qualitative, pertaining to the quality or a product or service
based on observations, measurements, or test which can be verified.
QAC-008 2: What is the fundamental rule for all maintenance? - ANSWERTechnical
specifications must be met at all times?
QAC-012 2: What form is used in a CWP as the cover sheet? - ANSWERQA form 9
QAC-013 2: What are the five basic maintenance principles for the workers? -
ANSWERA. The worker must have a process that guides him or her in the
performance of maintenance.
B. The worker must be trained so that work can be done safely & effectively.
C. The worker must have the proper technical direction.
D. The worker must have the proper material.
E. For essential & critical systems, confidence must be established by appropriate
testing.
QAC-015 2: While entering data on a QA form, you write yesterdays date instead of
today's date. How would you correct this mistake? - ANSWERQAC-024 2: What is a
QA form 17 and what is it's purpose? - ANSWERTest & inspection record - To
provide a report form for work, tests and inspections not covered by other QA forms.
QAC-009 2: State the meaning for the following margin symbols. - ANSWERC -
Steps requiring cleanliness inspection by craftsman
Q - Critical Quality Control Points
V - Steps requiring verification by a craftsman
I - Steps requiring inspection by a QA or not inspectors
S -Steps in an FMA procedure requiring verification by a member of ship's force
QAC-001 2: What is a formal work package (FWP)? What is a controlled work
package(CWP)? - ANSWERFWP Coordinates in a single document materials
required, initial conditions, MP, test inspections and system restoration for the
selected maintenance task.
CWP is required when higher authority requires a record of repairs, maintenance for
fabrication, repair, installation, inspection and testing process for specific systems or
components
QAC-004 2: List the responsibilities of a craftsman at a FMA. - ANSWERA. Perform
all maintenance actions following the CWP.
B. Ensure QA forms associated with the maintenance are correctly completed as
required by the applicable sections of this volume.
C. Enter signature, printed name and date on all QA data forms completed.
D. Ensure only TDME which has current calibration stickers with records attached or
available is used for production.
QAC-005 2: Define Objective Quality Evidence. - ANSWERAny statement of fact,
either quantitative or qualitative, pertaining to the quality or a product or service
based on observations, measurements, or test which can be verified.
QAC-008 2: What is the fundamental rule for all maintenance? - ANSWERTechnical
specifications must be met at all times?
QAC-012 2: What form is used in a CWP as the cover sheet? - ANSWERQA form 9
QAC-013 2: What are the five basic maintenance principles for the workers? -
ANSWERA. The worker must have a process that guides him or her in the
performance of maintenance.
B. The worker must be trained so that work can be done safely & effectively.
C. The worker must have the proper technical direction.
D. The worker must have the proper material.
E. For essential & critical systems, confidence must be established by appropriate
testing.
QAC-015 2: While entering data on a QA form, you write yesterdays date instead of
today's date. How would you correct this mistake? - ANSWERQAC-024 2: What is a
QA form 17 and what is it's purpose? - ANSWERTest & inspection record - To
provide a report form for work, tests and inspections not covered by other QA forms.
QAC-009 2: State the meaning for the following margin symbols. - ANSWERC -
Steps requiring cleanliness inspection by craftsman
Q - Critical Quality Control Points
V - Steps requiring verification by a craftsman
I - Steps requiring inspection by a QA or not inspectors
S -Steps in an FMA procedure requiring verification by a member of ship's force
