BOILERMAKER TEST QUESTIONS AND
ANSWERS
Advanced steam boilers can operate at temperatures
as high a s _____ degrees. - Answer-1,150
One way of identifying insulation that may
contain asbestos is through_____. - Answer-testing by qualified person
Supercritical boilers can operate at pressures
as high as_____psi. - Answer-4,500
The hazards associated with hot work performed
on areas coated with lead-based paint
are minimized in the workplace b y _____. - Answer-performing an area survey prior to performing
cutting or grinding operations
Grinding operations inside a boiler present
an explosion hazard due to _____. - Answer-combustible gases
, The weight of an object to be lifted should not
exceed the_____of the lifting equipment. - Answer-safe working load
The term that means asbestos insulation is
easily crumbled into fibers that become airborne
is _____. - Answer-friability
One of the places on a boiler where asbestos
may be found is _______ . - Answer-door seals
Before entering a confined space, a worker
should_____. - Answer-inspect the space's shoring and support
A boilermaker working at extreme heights
must follow safety precautions not only to
prevent falls but also to prevent causing ________ - Answer-injury to personnel working below from
falling objects
When welding with shielding gas, extra ventilation
is needed due to the fact that the gas
used______. - Answer-is heavier than air and collects in low areas
When working at heights,_____must be
worn. - Answer-a safety hamess
ANSWERS
Advanced steam boilers can operate at temperatures
as high a s _____ degrees. - Answer-1,150
One way of identifying insulation that may
contain asbestos is through_____. - Answer-testing by qualified person
Supercritical boilers can operate at pressures
as high as_____psi. - Answer-4,500
The hazards associated with hot work performed
on areas coated with lead-based paint
are minimized in the workplace b y _____. - Answer-performing an area survey prior to performing
cutting or grinding operations
Grinding operations inside a boiler present
an explosion hazard due to _____. - Answer-combustible gases
, The weight of an object to be lifted should not
exceed the_____of the lifting equipment. - Answer-safe working load
The term that means asbestos insulation is
easily crumbled into fibers that become airborne
is _____. - Answer-friability
One of the places on a boiler where asbestos
may be found is _______ . - Answer-door seals
Before entering a confined space, a worker
should_____. - Answer-inspect the space's shoring and support
A boilermaker working at extreme heights
must follow safety precautions not only to
prevent falls but also to prevent causing ________ - Answer-injury to personnel working below from
falling objects
When welding with shielding gas, extra ventilation
is needed due to the fact that the gas
used______. - Answer-is heavier than air and collects in low areas
When working at heights,_____must be
worn. - Answer-a safety hamess
