P-99 / Low PSI Oil Burner Operator Latest
Questions with Correct Solutions| Already
Graded A| Ace Your Grades.
What are instruction cards for oil burning systems? - Correct Answer-Cards
giving complete instructions for care and operation that are permanently
located near the equipment.
Every oil burning installation that is not fully automatic or requires
preheating shall be operated by, or under, the direct supervision of a
person holding a ____ issued by the fire commissioner. - Correct Answer-
COF
After any fuel burning equipment repair for which a licensed operator is
required, such operator shall also check the repairs and be ____ while the
equipment is started. - Correct Answer-Present.
What is abatement of air contaminants? - Correct Answer-Compliance with
the air pollution control code.
What are the 3 equipment classifications and their temperatures for the
products of combustion at the point of leaving the equipment? - Correct
Answer-(1) Low Temp: 600° F or less.
(2) Medium Temp: 600° - 1000° F.
(3) High Temp: 1000° or greater.
All heating, combustion, and cooking equipment shall be provided with
insulation or the building construction shall be fire protected, so that during
operation the surface of combustible construction materials will not be
raised to a temperature higher than ____. - Correct Answer-170 ̊ F
, Acceptance tests: Boilers shall not be placed in operation upon completion
of construction until they have been ____ and an equipment use permit has
been issued by the commissioner. - Correct Answer-Inspected and tested.
Periodic boiler inspections: All boilers shall be inspected at least ____
including chimney connections. - Correct Answer-Once a year.
Owner's annual statement: The owner of each boiler that is subject to
periodic inspections shall file an annual ____ with the commissioner,
specifying the location of each boiler and arrangement for inspection. -
Correct Answer-Written statement.
What three things must be tested for any fuel burning and storage
installation before the system can be operated? - Correct Answer-(1)
Tightness of liquid fuel piping.
(2) Tightness of fuel oil storage tanks.
(3) Tightness of gas distribution piping.
Ventilation shall be capable of providing at least ____ CFM of air for each
gallon of oil per hour required to fire the equipment to gross output. -
Correct Answer-36
What is fuel-oil? - Correct Answer-Hydrocarbon oils with a flashpoint not
lower than 100 F ̊ .
The use of crankcase refuse oil as fuel-oil is ____. - Correct Answer-
Prohibited.
Questions with Correct Solutions| Already
Graded A| Ace Your Grades.
What are instruction cards for oil burning systems? - Correct Answer-Cards
giving complete instructions for care and operation that are permanently
located near the equipment.
Every oil burning installation that is not fully automatic or requires
preheating shall be operated by, or under, the direct supervision of a
person holding a ____ issued by the fire commissioner. - Correct Answer-
COF
After any fuel burning equipment repair for which a licensed operator is
required, such operator shall also check the repairs and be ____ while the
equipment is started. - Correct Answer-Present.
What is abatement of air contaminants? - Correct Answer-Compliance with
the air pollution control code.
What are the 3 equipment classifications and their temperatures for the
products of combustion at the point of leaving the equipment? - Correct
Answer-(1) Low Temp: 600° F or less.
(2) Medium Temp: 600° - 1000° F.
(3) High Temp: 1000° or greater.
All heating, combustion, and cooking equipment shall be provided with
insulation or the building construction shall be fire protected, so that during
operation the surface of combustible construction materials will not be
raised to a temperature higher than ____. - Correct Answer-170 ̊ F
, Acceptance tests: Boilers shall not be placed in operation upon completion
of construction until they have been ____ and an equipment use permit has
been issued by the commissioner. - Correct Answer-Inspected and tested.
Periodic boiler inspections: All boilers shall be inspected at least ____
including chimney connections. - Correct Answer-Once a year.
Owner's annual statement: The owner of each boiler that is subject to
periodic inspections shall file an annual ____ with the commissioner,
specifying the location of each boiler and arrangement for inspection. -
Correct Answer-Written statement.
What three things must be tested for any fuel burning and storage
installation before the system can be operated? - Correct Answer-(1)
Tightness of liquid fuel piping.
(2) Tightness of fuel oil storage tanks.
(3) Tightness of gas distribution piping.
Ventilation shall be capable of providing at least ____ CFM of air for each
gallon of oil per hour required to fire the equipment to gross output. -
Correct Answer-36
What is fuel-oil? - Correct Answer-Hydrocarbon oils with a flashpoint not
lower than 100 F ̊ .
The use of crankcase refuse oil as fuel-oil is ____. - Correct Answer-
Prohibited.
