NAMP Chapter 3 Verified 2024
AIRSpeed Continuous Process Improvement (CPI) Work Center personnel shall be
Green Belt/LCIP certified within how many months of assignment? - ANSWER-12
AIRSpeed program is an enterprise-wide approach to enhancing the effectiveness and
efficiency of naval aviation by implementing which AIRSpeed methods to improve
quality, productivity, and cost? - ANSWER-Continuous Process Improvement (CPI)
An Individual Material Readiness List (IMRL) is constructed for all Navy and Marine
Corps aviation maintenance activities by extracting applicable portions of the data from
which system? - ANSWER-Support Equipment Resources Management Information
System (SERMIS)
As a general guideline, no more than how many months should elapse between the
Aircraft Service Period Adjustment (ASPA) inspection and the resulting adjusted Period
End Date (PED)? - ANSWER-18
Assignment of Inventory Control Points (ICPs) for Support Equipment may be found in
which publication? - ANSWER-NAVSUP P-485
Both O-level and I-level administration divisions shall keep a message history file by
date time group (DTG) for a minimum of how many months? - ANSWER-6
Certified welders shall complete the minimum required OJT per which reference prior to
being allowed to weld on aeronautical components? - ANSWER-NAVAIR 01-1A-34
CMIS Component Tracking System for Aircraft tracks the operating time/cycle counts of
selected aircraft components. They are primarily life limited components and the system
can supply reports which specify the operating time/cycle counts remaining on each
tracked component before it must be inspected or removed and replaced. using usage
rates derived from experiments and tests, workloads for maintenance and rework
facilities can be forecast for up to how many years? - ANSWER-5
CO's shall verify, as a minimum requirement, all unrestricted line officers assigned to
the Squadron Maintenance Department attend the appropriate CENNAVAVNTECHTRA
courses prior to or within how many days after assuming their duties? - ANSWER-60
CVNs that place their Radiography Program in a temporary suspension status must
coordinate with the nearest I-level Fleet Readiness Center (FRC) to provide radiography
proficiency training for their Non-Destructive Inspection (NDI) Technicians. CVNs will
reactivate their program no less than how many days prior to a planned deployment and
notify CNAP NDI Class Desk (N422B3) and RASO via naval letter? - ANSWER-90
, Depot activities must acknowledge JDRS Planner and estimator (P&E) Requests within
how many working days of submission? - ANSWER-1
Engines, Aeronautical Equipment Service Records (AESR), and CM ALS AESR records
will be thoroughly screened by second and third degree I-level activities to determine if
the required maintenance action is within their repair capability. Screening will be
completed within how many days of receipt? - ANSWER-10
For activities authorized to perform open facility X-ray, all NDI technicians shall
participate in at least one open facility X-ray inspection (either through normal workload
or to maintain proficiency) every how many months? - ANSWER-3
How many different ways is Support Equipment (SE) categorized as? - ANSWER-2
How many levels of division of maintenance concept is the NAMP founded on that
classifies maintenance by complexity, depth, scope, and range of work performed? -
ANSWER-3
How many sections are Individual Material Readiness Lists (IMRLs) presented in? -
ANSWER-5
How many years is the re-certification interval for I-level aeronautical welders for both
military and civilian personnel? - ANSWER-1
How often are Structural Appraisal of Fatigue Effects (SAFE) Program reports
published? - ANSWER-Quarterly
How often at a minimum must the reporting custodians, including Commander, Naval
Surface Forces Atlantic/Pacific activities conduct physical Individual Material Readiness
List (IMRL) inventories? - ANSWER-Annually
How often must the MO conduct a review of the Aircraft/Equipment Workload Report to
verify the Equipment Operational Capability (EOC) and up, down or partial aircraft
status are correctly coded? - ANSWER-Monthly
Lean, six sigma, along with what else comprise the primary AIRSpeed Continuous
Process Improvement (CPI) methods? - ANSWER-Theory of Constraints (TOC)
Licensed Aircraft Taxi personnel shall perform a taxi evolution every how many days for
the T/M/S aircraft for which they are certified? - ANSWER-90
Method specific NDI training shall be provided to all NDI operators by NDI specialists or
TYCOM authorized NDI technicians. This training is required in the following minimum
amounts: PT = 4 hours, MT = 4 hours, and ET = how many hours? - ANSWER-10
AIRSpeed Continuous Process Improvement (CPI) Work Center personnel shall be
Green Belt/LCIP certified within how many months of assignment? - ANSWER-12
AIRSpeed program is an enterprise-wide approach to enhancing the effectiveness and
efficiency of naval aviation by implementing which AIRSpeed methods to improve
quality, productivity, and cost? - ANSWER-Continuous Process Improvement (CPI)
An Individual Material Readiness List (IMRL) is constructed for all Navy and Marine
Corps aviation maintenance activities by extracting applicable portions of the data from
which system? - ANSWER-Support Equipment Resources Management Information
System (SERMIS)
As a general guideline, no more than how many months should elapse between the
Aircraft Service Period Adjustment (ASPA) inspection and the resulting adjusted Period
End Date (PED)? - ANSWER-18
Assignment of Inventory Control Points (ICPs) for Support Equipment may be found in
which publication? - ANSWER-NAVSUP P-485
Both O-level and I-level administration divisions shall keep a message history file by
date time group (DTG) for a minimum of how many months? - ANSWER-6
Certified welders shall complete the minimum required OJT per which reference prior to
being allowed to weld on aeronautical components? - ANSWER-NAVAIR 01-1A-34
CMIS Component Tracking System for Aircraft tracks the operating time/cycle counts of
selected aircraft components. They are primarily life limited components and the system
can supply reports which specify the operating time/cycle counts remaining on each
tracked component before it must be inspected or removed and replaced. using usage
rates derived from experiments and tests, workloads for maintenance and rework
facilities can be forecast for up to how many years? - ANSWER-5
CO's shall verify, as a minimum requirement, all unrestricted line officers assigned to
the Squadron Maintenance Department attend the appropriate CENNAVAVNTECHTRA
courses prior to or within how many days after assuming their duties? - ANSWER-60
CVNs that place their Radiography Program in a temporary suspension status must
coordinate with the nearest I-level Fleet Readiness Center (FRC) to provide radiography
proficiency training for their Non-Destructive Inspection (NDI) Technicians. CVNs will
reactivate their program no less than how many days prior to a planned deployment and
notify CNAP NDI Class Desk (N422B3) and RASO via naval letter? - ANSWER-90
, Depot activities must acknowledge JDRS Planner and estimator (P&E) Requests within
how many working days of submission? - ANSWER-1
Engines, Aeronautical Equipment Service Records (AESR), and CM ALS AESR records
will be thoroughly screened by second and third degree I-level activities to determine if
the required maintenance action is within their repair capability. Screening will be
completed within how many days of receipt? - ANSWER-10
For activities authorized to perform open facility X-ray, all NDI technicians shall
participate in at least one open facility X-ray inspection (either through normal workload
or to maintain proficiency) every how many months? - ANSWER-3
How many different ways is Support Equipment (SE) categorized as? - ANSWER-2
How many levels of division of maintenance concept is the NAMP founded on that
classifies maintenance by complexity, depth, scope, and range of work performed? -
ANSWER-3
How many sections are Individual Material Readiness Lists (IMRLs) presented in? -
ANSWER-5
How many years is the re-certification interval for I-level aeronautical welders for both
military and civilian personnel? - ANSWER-1
How often are Structural Appraisal of Fatigue Effects (SAFE) Program reports
published? - ANSWER-Quarterly
How often at a minimum must the reporting custodians, including Commander, Naval
Surface Forces Atlantic/Pacific activities conduct physical Individual Material Readiness
List (IMRL) inventories? - ANSWER-Annually
How often must the MO conduct a review of the Aircraft/Equipment Workload Report to
verify the Equipment Operational Capability (EOC) and up, down or partial aircraft
status are correctly coded? - ANSWER-Monthly
Lean, six sigma, along with what else comprise the primary AIRSpeed Continuous
Process Improvement (CPI) methods? - ANSWER-Theory of Constraints (TOC)
Licensed Aircraft Taxi personnel shall perform a taxi evolution every how many days for
the T/M/S aircraft for which they are certified? - ANSWER-90
Method specific NDI training shall be provided to all NDI operators by NDI specialists or
TYCOM authorized NDI technicians. This training is required in the following minimum
amounts: PT = 4 hours, MT = 4 hours, and ET = how many hours? - ANSWER-10
