ALL RIGHTS RESERVED.
Digital Signal Processing Exam study Guide.
Analogue vs. Digital Signals - answer✔Auditory perception = analogue signals stimulating the
auditory system
Digital signals = electronic equipment
Main difference = continuity
-analogue signals are continuous and defined at every instant in time
-digital signals are discrete and defined at only certain instances in time
Advantages of digital signals - answer✔- immune to degradation when copied
- easier to apply signal processing
- easier to store
Analogue to Digital Conversion and Reconstruction (ADC) - answer✔Analog input (sound)
ADC (sampler, discrete-time signal, quantizer)
DSP (digital input to digital output - compression, wind noise filter, adaptive microphones, etc.)
Reconstruction (DAC to low-pass filter)
Analog output
Sampling - answer✔The first process in acquiring a digital signal
- measuring and storing the values of an analogue signal
- Obtained at regular rate as defined by the frequency (fs)
1|Page
, ©FYNDLAY EXAM SOLUTIONS 2024/2025
ALL RIGHTS RESERVED.
- Each time value associated with each sample can be calculated by knowing then the period
(ps=1/fs)
- Are "held" through the sample period
Sampling Process - answer✔Produces a spectrum that repeats regularly
- Additional frequency components are introduced into the signal as a result
- The frequency components occur in a regular fashion and are "reflected" about the y-axis
(negative frequencies)
Sampling: Nyquist Theorem - answer✔During reconstruction, typically filter out the repeated
versions of the spectrum
- For signal preservation when filtered and reconstructed, it must be sampled at a sufficiently
high rate
- The minimum sampling frequency needed to reconstruct the original signal is equal to 2x the
value of the highest frequency component in the signal.
Quantization - answer✔The process of rounding each of the sampled analogue values
- Rounding is required because digital signals are represented by a restricted number of
discrete values called steps
- Each step is associated with a binary number
Digitization - answer✔The process by which quantized samples are converted to binary digits
- Necessary step that translates the signal into a language computers and processing chips can
understand
- The number of total values can be calculated: d=2^n
2|Page