IMSA Workzone Exam With Complete Solutions 100% Verified
On the shoulder adjacent to traffic being controlled - ANSWER The work zone begins at
the first advance warning sign; thus, where should the flagger stand when controlling
traffic in a TTC zone?
three - ANSWER How many orange and black TTC signs should be in each direction on a
2-way, 2-lane rural roadway?
500 ft. - ANSWER What should be the spacing of signs on a two-lane, two-way rural
highway?
350 ft - ANSWER How many feet apart should the advanced warning signs be on a high
speed urban roadway?
on the left hand side of the highway - ANSWER For additional emphasis on a high speed
urban roadway, signs may be posted: _________
The distance required to safely route traffic from one lane to another - ANSWER Taper
length refers to:
speed and width of lane closed - ANSWER taper length is based on:
equal in feet to the speed limit - ANSWER in a taper, the maximum distance between
channelizing devices should be:
traffic should pass to the left - ANSWER on a barricade, if the stripes start at the upper
right side and angle down to the lower left side: ________
at least 28" tall and retroreflectorized with at least two white bands and two orange
bands - ANSWER at night and/or on high speed roads greater than 45 mph, cones shall
, be: __________
at the beginning of the taper - ANSWER one a rural two-lane road, where would you
place the flagger in respect to the beginning of the taper for a closed lane?
1) Type of work to be done
2) volume of traffic
3) speed of traffic
4) school bus routes - ANSWER What are some of the things that should be considered
in developing a TTC plan?
diversion - ANSWER the rerouting of traffic onto a temporary bypass road is called a:
__________
removed by grinding - ANSWER pavement markings that are no longer needed should
be:
routinely - ANSWER a TTC zone should be inspected:
Standard Statement - ANSWER in the MUTCD a required condition is a:
a permissive condition statement - ANSWER mutcd an option is:
temporary traffic control plan - ANSWER A TTC plan is a:
typical application drawings - ANSWER A TTC plan should include:
be trained and/or certified - ANSWER MUTCD Thus far has stated that those individuals
responsible to carry out the implementation of TTC measures should be:
On the shoulder adjacent to traffic being controlled - ANSWER The work zone begins at
the first advance warning sign; thus, where should the flagger stand when controlling
traffic in a TTC zone?
three - ANSWER How many orange and black TTC signs should be in each direction on a
2-way, 2-lane rural roadway?
500 ft. - ANSWER What should be the spacing of signs on a two-lane, two-way rural
highway?
350 ft - ANSWER How many feet apart should the advanced warning signs be on a high
speed urban roadway?
on the left hand side of the highway - ANSWER For additional emphasis on a high speed
urban roadway, signs may be posted: _________
The distance required to safely route traffic from one lane to another - ANSWER Taper
length refers to:
speed and width of lane closed - ANSWER taper length is based on:
equal in feet to the speed limit - ANSWER in a taper, the maximum distance between
channelizing devices should be:
traffic should pass to the left - ANSWER on a barricade, if the stripes start at the upper
right side and angle down to the lower left side: ________
at least 28" tall and retroreflectorized with at least two white bands and two orange
bands - ANSWER at night and/or on high speed roads greater than 45 mph, cones shall
, be: __________
at the beginning of the taper - ANSWER one a rural two-lane road, where would you
place the flagger in respect to the beginning of the taper for a closed lane?
1) Type of work to be done
2) volume of traffic
3) speed of traffic
4) school bus routes - ANSWER What are some of the things that should be considered
in developing a TTC plan?
diversion - ANSWER the rerouting of traffic onto a temporary bypass road is called a:
__________
removed by grinding - ANSWER pavement markings that are no longer needed should
be:
routinely - ANSWER a TTC zone should be inspected:
Standard Statement - ANSWER in the MUTCD a required condition is a:
a permissive condition statement - ANSWER mutcd an option is:
temporary traffic control plan - ANSWER A TTC plan is a:
typical application drawings - ANSWER A TTC plan should include:
be trained and/or certified - ANSWER MUTCD Thus far has stated that those individuals
responsible to carry out the implementation of TTC measures should be:
