• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 15 páginas
Examen

EPA 608 Type III Study

Document preview thumbnail
Vista previa 2 fuera de 15 páginas

To check for leaks in the water box (with water removed), place the probe ________. A) at the outlet of the purge unit B) around the vent valve C) at the leak test plug D) in the drain valve opening - answerD) in the drain valve opening The owners and operators of any system that has 50 or more pounds of refrigerant charge must keep records of refrigerant added, leak inspections, initial verification tests, and follow-up verification tests for at least ________. A) 2 years B) 3 years C) 5 years D) 8 years or the life of the appliance, whichever is less - answerB) 3 years Leak testing a low-pressure refrigeration system at pressures above 10 psig could damage the ________. A) compressor B) condenser C) purge unit D) rupture disc - answerD) rupture disc After a leaking system that has been repaired has passed the initial verification leak test, when must the follow-up verification test be conducted? A) within 5 days B) within 10 days C) within 30 days D) No follow-up verification test is required. - answerB) within 10 days A hydrostatic tube test kit is used to ________. A) find if there is a leak in the tube B) flush water from tubes C) expand replacement tubes into the chiller core D) clean deposits from the water-side of the chiller - answerA) find if there is a leak in the tube Water must be circulated through a chiller during refrigerant evacuation to avoid ________. A) acid buildup B) oil overheating C) freezing of the water D) system isothermalization - answerC) freezing of the water For a commercial refrigeration system with a charge of 50 pounds or more of refrigerant, a substantial (or threshold) leak rate will be reduced to ________ after January 1, 2019. A) 5% B) 10% C) 20% D) 30% - answerC) 20% When charging a low-pressure chiller with R-245ca, first introduce the refrigerant as a vapor until the pressure is greater than 18 inches Hg vacuum to prevent ________. A) the purge unit from venting excess refrigerant into the air B) the purge unit from overheating C) the chiller water from freezing D) over-pressurization of the system and burst disk failure - answerC) the chiller water from freezing ASHRAE Standard 15 calls for the activation of an alarm and mechanical ventilation when the ________. A) TLV-TWA is exceeded B) UTL (upper threshold limit) is exceeded C) oxygen level drops below 16% D) EEL (emergency exposure limit) is exceeded by 10% - answerA) TLV-TWA is exceeded What is the Safety classification of R-123? A) A1 B) A2 C) A2L D) B1 - answerD) B1 The ________ is a common leak spot in systems with open-drive type compressors.

Vista previa del contenido

EPA 608 Type III Study
To check for leaks in the water box (with water removed), place the probe ________.

A) at the outlet of the purge unit
B) around the vent valve
C) at the leak test plug
D) in the drain valve opening - answerD) in the drain valve opening

The owners and operators of any system that has 50 or more pounds of refrigerant charge must keep
records of refrigerant added, leak inspections, initial verification tests, and follow-up verification tests
for at least ________.

A) 2 years
B) 3 years
C) 5 years
D) 8 years or the life of the appliance, whichever is less - answerB) 3 years

Leak testing a low-pressure refrigeration system at pressures above 10 psig could damage the ________.

A) compressor
B) condenser
C) purge unit
D) rupture disc - answerD) rupture disc

After a leaking system that has been repaired has passed the initial verification leak test, when must the
follow-up verification test be conducted?

A) within 5 days
B) within 10 days
C) within 30 days
D) No follow-up verification test is required. - answerB) within 10 days

A hydrostatic tube test kit is used to ________.

A) find if there is a leak in the tube
B) flush water from tubes
C) expand replacement tubes into the chiller core
D) clean deposits from the water-side of the chiller - answerA) find if there is a leak in the tube

Water must be circulated through a chiller during refrigerant evacuation to avoid ________.

A) acid buildup
B) oil overheating
C) freezing of the water
D) system isothermalization - answerC) freezing of the water

, For a commercial refrigeration system with a charge of 50 pounds or more of refrigerant, a substantial
(or threshold) leak rate will be reduced to ________ after January 1, 2019.

A) 5%
B) 10%
C) 20%
D) 30% - answerC) 20%

When charging a low-pressure chiller with R-245ca, first introduce the refrigerant as a vapor until the
pressure is greater than 18 inches Hg vacuum to prevent ________.

A) the purge unit from venting excess refrigerant into the air

B) the purge unit from overheating

C) the chiller water from freezing

D) over-pressurization of the system and burst disk failure - answerC) the chiller water from freezing

ASHRAE Standard 15 calls for the activation of an alarm and mechanical ventilation when the ________.

A) TLV-TWA is exceeded
B) UTL (upper threshold limit) is exceeded
C) oxygen level drops below 16%
D) EEL (emergency exposure limit) is exceeded by 10% - answerA) TLV-TWA is exceeded

What is the Safety classification of R-123?

A) A1
B) A2
C) A2L
D) B1 - answerD) B1

The ________ is a common leak spot in systems with open-drive type compressors.

A) chiller endplate
B) rotating shaft seal on the compressor
C) service valve packing
D) pressure relief valve seat - answerB) rotating shaft seal on the compressor

When must the leak rate be calculated?

A) When topping off or recharging a system due to a loss of charge

B) When the system charge is more than 50 pounds

C) When you have topped off or changed the system at least twice in a calendar year

Información del documento

Subido en
11 de noviembre de 2024
Número de páginas
15
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$11.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes