P-99 / LOW PSI OIL BURNER OPERATOR STUDY
GUIDE WITH COMPLETE SOLUTION!!
All heating, combustion, and cooking equipment must be insulated or the building
must be fire-protected to prevent combustible materials from reaching a
temperature above:
A) 150° F
B) 170° F
C) 190° F
D) 200° F
Answer: B
Acceptance tests: When construction on boilers is complete, they cannot be
operated until they are ____ and the commissioner issues an equipment use permit.
A) Approved and labeled
B) Inspected and tested
C) Sealed and permitted
D) Registered and labeled
Answer: B
Periodic boiler inspections: Boilers must be inspected at least ____ each year,
including all chimney connections.
A) Twice a year
B) Once every two years
C) Once a year
D) Quarterly
,Answer: C
Owner's annual statement: Each boiler owner required to have periodic inspections
must submit an annual ____ to the commissioner, listing the boiler location and
inspection plans.
A) Inspection form
B) Written statement
C) Maintenance log
D) Certification
Answer: B
Before operating any fuel-burning and storage system, what three components
must be tested?
A) Burner, pump, and piping
B) Tightness of liquid fuel piping, fuel oil storage tanks, and gas distribution piping
C) Ventilation, filters, and valves
D) Burners, ignition, and storage tanks
Answer: B
What are instruction cards for oil-burning systems?
A) Warning signs near the equipment
B) Cards with complete operating and care instructions, permanently placed by the
equipment
C) Manufacturer’s warranty cards
D) Cards with maintenance schedules
Answer: B
, Every oil-burning installation that isn’t fully automatic or requires preheating must
be managed by someone with a ____ issued by the fire commissioner.
A) Certification of Operation
B) Permit
C) Certificate of Fitness (COF)
D) Training card
Answer: C
After repairs are made to fuel-burning equipment that requires a licensed operator,
that operator must ____ while the equipment is started.
A) Record the inspection
B) Be present
C) Approve the repair
D) Provide documentation
Answer: B
What is meant by "abatement of air contaminants"?
A) Filtering contaminants
B) Reducing emissions
C) Compliance with air pollution control codes
D) Removal of carbon
Answer: C
What are the three equipment classifications based on combustion temperatures at
the exit point?
GUIDE WITH COMPLETE SOLUTION!!
All heating, combustion, and cooking equipment must be insulated or the building
must be fire-protected to prevent combustible materials from reaching a
temperature above:
A) 150° F
B) 170° F
C) 190° F
D) 200° F
Answer: B
Acceptance tests: When construction on boilers is complete, they cannot be
operated until they are ____ and the commissioner issues an equipment use permit.
A) Approved and labeled
B) Inspected and tested
C) Sealed and permitted
D) Registered and labeled
Answer: B
Periodic boiler inspections: Boilers must be inspected at least ____ each year,
including all chimney connections.
A) Twice a year
B) Once every two years
C) Once a year
D) Quarterly
,Answer: C
Owner's annual statement: Each boiler owner required to have periodic inspections
must submit an annual ____ to the commissioner, listing the boiler location and
inspection plans.
A) Inspection form
B) Written statement
C) Maintenance log
D) Certification
Answer: B
Before operating any fuel-burning and storage system, what three components
must be tested?
A) Burner, pump, and piping
B) Tightness of liquid fuel piping, fuel oil storage tanks, and gas distribution piping
C) Ventilation, filters, and valves
D) Burners, ignition, and storage tanks
Answer: B
What are instruction cards for oil-burning systems?
A) Warning signs near the equipment
B) Cards with complete operating and care instructions, permanently placed by the
equipment
C) Manufacturer’s warranty cards
D) Cards with maintenance schedules
Answer: B
, Every oil-burning installation that isn’t fully automatic or requires preheating must
be managed by someone with a ____ issued by the fire commissioner.
A) Certification of Operation
B) Permit
C) Certificate of Fitness (COF)
D) Training card
Answer: C
After repairs are made to fuel-burning equipment that requires a licensed operator,
that operator must ____ while the equipment is started.
A) Record the inspection
B) Be present
C) Approve the repair
D) Provide documentation
Answer: B
What is meant by "abatement of air contaminants"?
A) Filtering contaminants
B) Reducing emissions
C) Compliance with air pollution control codes
D) Removal of carbon
Answer: C
What are the three equipment classifications based on combustion temperatures at
the exit point?
