FDNY P-99 C OF F STUDY GUIDE WITH
COMPLETE SOLUTION BASED ON LATEST
VERSION!!
What is a key requirement for the location of a boiler installation?
A) Close to building exits
B) High ceilings
C) Adequate clearance from combustible materials
D) Near water sources
Answer: C
At what maximum temperature must materials stay under during combustion to
prevent fire hazards?
A) 140 degrees
B) 150 degrees
C) 170 degrees
D) 200 degrees
Answer: C
What is required for safe access to the boiler?
A) Stair access on all sides
B) Clear, hazard-free access for maintenance and operation
C) Nearby emergency exits
D) Steps and handrails
Answer: B
What must be done before a newly installed boiler can be put into operation?
, A) Registration with the fire department
B) Certification by a licensed inspector
C) Inspection, testing, and issuance of a use permit by the commissioner
D) Installation of warning signs
Answer: C
How frequently should boilers undergo inspection?
A) Quarterly
B) Every six months
C) Annually
D) Every five years
Answer: C
What document must a certificate holder provide annually?
A) Maintenance report
B) Inspection certificate
C) Annual statement from the owner
D) Safety checklist
Answer: C
Upon installation, which components must undergo a hydrostatic test, and who is
responsible?
A) Gas piping and fuel tanks by the building owner
B) Electrical systems by the operator
C) Liquid fuel piping and fuel oil storage tanks by the installing contractor
COMPLETE SOLUTION BASED ON LATEST
VERSION!!
What is a key requirement for the location of a boiler installation?
A) Close to building exits
B) High ceilings
C) Adequate clearance from combustible materials
D) Near water sources
Answer: C
At what maximum temperature must materials stay under during combustion to
prevent fire hazards?
A) 140 degrees
B) 150 degrees
C) 170 degrees
D) 200 degrees
Answer: C
What is required for safe access to the boiler?
A) Stair access on all sides
B) Clear, hazard-free access for maintenance and operation
C) Nearby emergency exits
D) Steps and handrails
Answer: B
What must be done before a newly installed boiler can be put into operation?
, A) Registration with the fire department
B) Certification by a licensed inspector
C) Inspection, testing, and issuance of a use permit by the commissioner
D) Installation of warning signs
Answer: C
How frequently should boilers undergo inspection?
A) Quarterly
B) Every six months
C) Annually
D) Every five years
Answer: C
What document must a certificate holder provide annually?
A) Maintenance report
B) Inspection certificate
C) Annual statement from the owner
D) Safety checklist
Answer: C
Upon installation, which components must undergo a hydrostatic test, and who is
responsible?
A) Gas piping and fuel tanks by the building owner
B) Electrical systems by the operator
C) Liquid fuel piping and fuel oil storage tanks by the installing contractor
