UCT T-6 Systems Test
With Solution
What are the three primary flight controls? - ANSWERAilerons, elevator,
rudder
Which axis does the aileron control? - ANSWERLongitudinal (roll)
Which axis does the elevator control? - ANSWERLateral (pitch)
Which axis does the rudder control? - ANSWERVertical (yaw)
How is the trim controlled? - ANSWERElectro-Mechanical
Is the trim a primary or secondary control? - ANSWERSecondary
What is the Trim Aid Device (TAD)? - ANSWERAssists controlling and
counteracting yaw
How much horsepower does the engine produce? - ANSWER1100
, horsepower
In what position should the ignition switch be in for normal operations? -
ANSWERNORM
What does the IGN SEL annunciator mean? - ANSWERIgniters are active
How do you put the PCL in cut-off? - ANSWERUse the cut-off finger lift and
guard
What is the purpose of the Power Management Unit? - ANSWERKeeps the
engine and prop within operating limits
What does a PMU STATUS annunciator indicate? - ANSWERFault or mismatch
in the weight-on-wheel switches and the PMU will not revert to ground mode
upon landing
On what display can the fuel quantity be found? - ANSWERAlternate Engine
Data Display (AEDD)
What is the normal hydraulic pressure range? - ANSWER3000 ±120 psi
With Solution
What are the three primary flight controls? - ANSWERAilerons, elevator,
rudder
Which axis does the aileron control? - ANSWERLongitudinal (roll)
Which axis does the elevator control? - ANSWERLateral (pitch)
Which axis does the rudder control? - ANSWERVertical (yaw)
How is the trim controlled? - ANSWERElectro-Mechanical
Is the trim a primary or secondary control? - ANSWERSecondary
What is the Trim Aid Device (TAD)? - ANSWERAssists controlling and
counteracting yaw
How much horsepower does the engine produce? - ANSWER1100
, horsepower
In what position should the ignition switch be in for normal operations? -
ANSWERNORM
What does the IGN SEL annunciator mean? - ANSWERIgniters are active
How do you put the PCL in cut-off? - ANSWERUse the cut-off finger lift and
guard
What is the purpose of the Power Management Unit? - ANSWERKeeps the
engine and prop within operating limits
What does a PMU STATUS annunciator indicate? - ANSWERFault or mismatch
in the weight-on-wheel switches and the PMU will not revert to ground mode
upon landing
On what display can the fuel quantity be found? - ANSWERAlternate Engine
Data Display (AEDD)
What is the normal hydraulic pressure range? - ANSWER3000 ±120 psi
