DEFENSE BASIC PRESERVATION AND
PACKING EXAM | ALL QUESTIONS AND
CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM | VERIFIED
ANSWERS
You're packaging several small, sturdy, lightweight items in one box, What
is the most cost-effective method for keeping them separated and
protected? ---------CORRECT ANSWER-----------------fiberboard partitions
This type of item can withstand significant impact without damage, so it is
often blocked and braced, but may not need cushioning. ---------CORRECT
ANSWER-----------------rugged
You're attempting to pack a large, awkward item that would be much easier
to ship if it was partially disassembled. Which action should you take? -------
--CORRECT ANSWER-----------------Get permission from the proper
authority to disassemble the item
Which cushioning method is used for sensitive electronics shipped in racks
or transport cases? ---------CORRECT ANSWER-----------------
suspension/shock mounts
Which cushioning method is often used for consumer electronic items when
a full floated package is not cost-effective? ---------CORRECT ANSWER-----
------------side pads
,Which marking identifies the military shipment label (MSL)? ---------
CORRECT ANSWER-----------------C
Which publication provides general standards for outer container
markings? ---------CORRECT ANSWER-----------------MIL-STD-129
Which marking is NOT included on the outer container label? ---------
CORRECT ANSWER-----------------item nomenclature
You are shipping a large DoD container. What special tagging is required
for global tracking? ---------CORRECT ANSWER-----------------Radio
Frequency Identification (RFID)
What special marking uses a three-position alphanumeric code to expedite
critical shipments? ---------CORRECT ANSWER-----------------Project Code
Which bar code must include human-readable interpretation (HRI)
markings? ---------CORRECT ANSWER-----------------Linear Bar Code
The labels shown here provide guidance on a shipment's specific handling
needs. They are known as ---------CORRECT ANSWER-----------------
Special markings
,What is the most common size of a pallet? ---------CORRECT ANSWER-----
------------40 x 48 inches
Which of these is a 4-way entry, double wing, stringer pallet? ---------
CORRECT ANSWER-----------------the lighter one with the edges hanging
over
Which of these is a 2-way entry, double wing, blocked pallet? ---------
CORRECT ANSWER-----------------the darker one with the edges hanging
over
Which of these is a 4-way entry, flush, stringer pallet? ---------CORRECT
ANSWER-----------------the darker one that is flush
Which of these is a 2-way entry, blocked pallet? ---------CORRECT
ANSWER-----------------the lighter one that is flush
Which publication contains the military standards for pallets and
palletization? ---------CORRECT ANSWER-----------------MIL-STD-147
You are loading a pallet. Where do you look up the load pattern? ---------
CORRECT ANSWER-----------------MIL-STD-147, Appendix B
You are loading a pallet and need to determine its load pattern. Which two
container measurements do you need in order to locate the load pattern
, number in MIL-STD-147 Table B-I? ---------CORRECT ANSWER--------------
---Length and width
Areas shaded black on a load pattern represent empty areas that ---------
CORRECT ANSWER-----------------must be filled with stability dunnage
Which of these pallet loads has an overhang? ---------CORRECT
ANSWER-----------------the one with the black cylinders
Which of these images shows edge protectors? ---------CORRECT
ANSWER-----------------the one with the white protectors
Which of these images shows a collar? ---------CORRECT ANSWER---------
--------the orange tubes
You are loading a pallet. Where do you look up load type and its preferred
stability dunnage and bonding method? ---------CORRECT ANSWER---------
--------MIL-STD-147, Appendix A
Which of the following bonding methods secures the load to the pallet? -----
----CORRECT ANSWER-----------------Method D: Tie-down straps
A palletized load weighs 600 pounds and requires 6 tie-down straps. To
keep the load from falling apart during handling and transit, you must use
strapping material with a breaking strength of at least ---------CORRECT
ANSWER-----------------100 pounds
PACKING EXAM | ALL QUESTIONS AND
CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM | VERIFIED
ANSWERS
You're packaging several small, sturdy, lightweight items in one box, What
is the most cost-effective method for keeping them separated and
protected? ---------CORRECT ANSWER-----------------fiberboard partitions
This type of item can withstand significant impact without damage, so it is
often blocked and braced, but may not need cushioning. ---------CORRECT
ANSWER-----------------rugged
You're attempting to pack a large, awkward item that would be much easier
to ship if it was partially disassembled. Which action should you take? -------
--CORRECT ANSWER-----------------Get permission from the proper
authority to disassemble the item
Which cushioning method is used for sensitive electronics shipped in racks
or transport cases? ---------CORRECT ANSWER-----------------
suspension/shock mounts
Which cushioning method is often used for consumer electronic items when
a full floated package is not cost-effective? ---------CORRECT ANSWER-----
------------side pads
,Which marking identifies the military shipment label (MSL)? ---------
CORRECT ANSWER-----------------C
Which publication provides general standards for outer container
markings? ---------CORRECT ANSWER-----------------MIL-STD-129
Which marking is NOT included on the outer container label? ---------
CORRECT ANSWER-----------------item nomenclature
You are shipping a large DoD container. What special tagging is required
for global tracking? ---------CORRECT ANSWER-----------------Radio
Frequency Identification (RFID)
What special marking uses a three-position alphanumeric code to expedite
critical shipments? ---------CORRECT ANSWER-----------------Project Code
Which bar code must include human-readable interpretation (HRI)
markings? ---------CORRECT ANSWER-----------------Linear Bar Code
The labels shown here provide guidance on a shipment's specific handling
needs. They are known as ---------CORRECT ANSWER-----------------
Special markings
,What is the most common size of a pallet? ---------CORRECT ANSWER-----
------------40 x 48 inches
Which of these is a 4-way entry, double wing, stringer pallet? ---------
CORRECT ANSWER-----------------the lighter one with the edges hanging
over
Which of these is a 2-way entry, double wing, blocked pallet? ---------
CORRECT ANSWER-----------------the darker one with the edges hanging
over
Which of these is a 4-way entry, flush, stringer pallet? ---------CORRECT
ANSWER-----------------the darker one that is flush
Which of these is a 2-way entry, blocked pallet? ---------CORRECT
ANSWER-----------------the lighter one that is flush
Which publication contains the military standards for pallets and
palletization? ---------CORRECT ANSWER-----------------MIL-STD-147
You are loading a pallet. Where do you look up the load pattern? ---------
CORRECT ANSWER-----------------MIL-STD-147, Appendix B
You are loading a pallet and need to determine its load pattern. Which two
container measurements do you need in order to locate the load pattern
, number in MIL-STD-147 Table B-I? ---------CORRECT ANSWER--------------
---Length and width
Areas shaded black on a load pattern represent empty areas that ---------
CORRECT ANSWER-----------------must be filled with stability dunnage
Which of these pallet loads has an overhang? ---------CORRECT
ANSWER-----------------the one with the black cylinders
Which of these images shows edge protectors? ---------CORRECT
ANSWER-----------------the one with the white protectors
Which of these images shows a collar? ---------CORRECT ANSWER---------
--------the orange tubes
You are loading a pallet. Where do you look up load type and its preferred
stability dunnage and bonding method? ---------CORRECT ANSWER---------
--------MIL-STD-147, Appendix A
Which of the following bonding methods secures the load to the pallet? -----
----CORRECT ANSWER-----------------Method D: Tie-down straps
A palletized load weighs 600 pounds and requires 6 tie-down straps. To
keep the load from falling apart during handling and transit, you must use
strapping material with a breaking strength of at least ---------CORRECT
ANSWER-----------------100 pounds
