• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 6 páginas
Examen

TPC Basic Hydraulics

Document preview thumbnail
Vista previa 2 fuera de 6 páginas

A hydraulic pipe designated as Scheduled 80 is - answer-Extra Heavy A disadvantage of using hose in hydaulic systems instead of piping or tubingis that the hose - answer-is less permanent Which type of fitting should be used on a steel hydraulic line - answer-steel Pressure lose in a hydraulic line depends on the - answer-flow velocity Hydraulic lines should NEVER be constructed of - answer-Galvanized pipe Which type of valve has a round core - answer-Rotary To facillitate comparison, manufacturers rate the flow capacity of vavles by their - answer-CV Factor Which of the following kinds of vavles should be used in hydraulic system to change the direction of motion of the cylinder? - answer-Directional control vavle The coonsturction of a spool vavle causes it to - answer-Be partially balanced In applications using a needle vavle that must be shut off frequently, a ________ should be used - answer-sofft seat What characteristic of a fluid does the term "specific gravity" describe ? - answer-Density the formation of large air bubbles or pockets in a hydraulic system is known as - answer-Cavitation The Law of Conservatiion of Energy states that energy cannot be created or destroyed, it can only be - answer-Transformed According to Bernoullis Law Principle, when fluid flow increases in asystem, the pressure - answer-Decreases What type of energy is produced in a hydraulic system when the piston has raised an object to a higher level ? - answer-Potential Fluid pressure in one section of a hydraulic system is limited by a - answer-reducing vavle The flow from the outlet of a sequence vavle is at - answer-Line pressure A meter out flow control vavle is used to regulate fluid flow from a(n) - answer-actuator The operating differential pressure of a relief vavle is the difference between its maximum - answer-Cracking pressure A counterbalance vavle is normally a _______ vavle - answer-double- poppet The ability of a fluid to penetrate into small clearances between closely fitted parts is determined by the fluid's - answer-viscosity The ability of a hydraulic fluid to create a barrier that prevents metal to metal contact is called its - answer-Film Strength A hydraulic fluid that exhibits little change in viscosity when heated is said to have a high - answer-viscosity index A fluid rated at 250 SSU has a _______ than a fluid rated at 150 SSU. - answer-higher viscosity Which of the following, when added to hydraulic fluid, will limit oxidation? - answer-A chemical inhibitor How does an internal gear pump prevent the fluid from flowing through the motor? -

Vista previa del contenido

TPC Basic Hydraulics
A hydraulic pipe designated as Scheduled 80 is - answer-Extra Heavy

A disadvantage of using hose in hydaulic systems instead of piping or tubingis that
the hose - answer-is less permanent

Which type of fitting should be used on a steel hydraulic line - answer-steel

Pressure lose in a hydraulic line depends on the - answer-flow velocity

Hydraulic lines should NEVER be constructed of - answer-Galvanized pipe

Which type of valve has a round core - answer-Rotary

To facillitate comparison, manufacturers rate the flow capacity of vavles by their -
answer-CV Factor

Which of the following kinds of vavles should be used in hydraulic system to change
the direction of motion of the cylinder? - answer-Directional control vavle

The coonsturction of a spool vavle causes it to - answer-Be partially balanced

In applications using a needle vavle that must be shut off frequently, a ________
should be used - answer-sofft seat

What characteristic of a fluid does the term "specific gravity" describe ? - answer-
Density

the formation of large air bubbles or pockets in a hydraulic system is known as -
answer-Cavitation

The Law of Conservatiion of Energy states that energy cannot be created or
destroyed, it can only be - answer-Transformed

According to Bernoullis Law Principle, when fluid flow increases in asystem, the
pressure - answer-Decreases

What type of energy is produced in a hydraulic system when the piston has raised
an object to a higher level ? - answer-Potential

Fluid pressure in one section of a hydraulic system is limited by a - answer-reducing
vavle

The flow from the outlet of a sequence vavle is at - answer-Line pressure

A meter out flow control vavle is used to regulate fluid flow from a(n) - answer-
actuator

, The operating differential pressure of a relief vavle is the difference between its
maximum - answer-Cracking pressure

A counterbalance vavle is normally a _______ vavle - answer-double- poppet

The ability of a fluid to penetrate into small clearances between closely fitted parts
is determined by the fluid's - answer-viscosity

The ability of a hydraulic fluid to create a barrier that prevents metal to metal
contact is called its - answer-Film Strength

A hydraulic fluid that exhibits little change in viscosity when heated is said to have a
high - answer-viscosity index

A fluid rated at 250 SSU has a _______ than a fluid rated at 150 SSU. - answer-higher
viscosity

Which of the following, when added to hydraulic fluid, will limit oxidation? - answer-
A chemical inhibitor

How does an internal gear pump prevent the fluid from flowing through the motor? -
answer-The internal gear has fewer teeth than the external gear

Vane motors made with only one motor chamber are called _______ motors - answer-
unbalanced

Internal leakage inn hydraulic gear motor is held to a minimum by the use of -
answer-Wear plates

In a hydraulic motor, the ______ of the admitted fluid determines the torque output. -
answer-pressure

The speed of an axial- piston motor depends on the ______ of the fluid. - answer-flow

When a hydraulic cylinder is added to an exixsting system, be sure that the -
answer-Pump capacity is adequate

Which type of cylinder has from two to six nested sleeves? - answer-telescoping

To calculate the amount of force a cyliiinder can exert, multiply the piston area by
the - answer-fluid pressure

Once a load is moving, the frictional resistance - answer-decreases

The force exerted bby a double acting piston is - answer-less on rod side

Vane tips are grooved to provide - answer-better lubrication

The ratio of the actual delivery rate of a pump to its displacement is its - answer-
volumetric efficiency

Información del documento

Subido en
4 de noviembre de 2024
Número de páginas
6
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$9.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes