NCCER Core Module 1 -
2024 UPDATE
Companies with strong safety cultures usually have lower? - ✔✔✔ANSWER-
Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are
examples of - ✔✔✔ANSWER-unsafe conditions
The activity that consists of breaking a job into its component tasks and then
analyzing each step for
potential hazards is called a _____. - ✔✔✔ANSWER-Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is
referred to as _____. - ✔✔✔ANSWER-Risk
, If there is a hole in the floor of a structure, the preferred method of protecting
workers from falls is to _____. - ✔✔✔ANSWER-Cover and mark it
The D-ring or support point on a safety harness should be placed _____. -
✔✔✔ANSWER-Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. -
✔✔✔ANSWER-Competent person
Lanyards that have no shock-absorbing features are used for _____. -
✔✔✔ANSWER-Positioning
When placing a ladder against a platform or roof, the top of the ladder should
extend above the point where
the ladder touches the platform or roof by at least _____. - ✔✔✔ANSWER-3 Feet
When performing overhead work on scaffolding, what protective measures must be
taken to prevent objects
from falling and striking a person below? - ✔✔✔ANSWER-toe boards, debris
nets, or canopies
When stacking materials such as bricks or block, do not stack materials beyond a
_____. - ✔✔✔ANSWER-4:1 Ratio
Benching systems are prohibited in _____. - ✔✔✔ANSWER-Type C
2024 UPDATE
Companies with strong safety cultures usually have lower? - ✔✔✔ANSWER-
Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are
examples of - ✔✔✔ANSWER-unsafe conditions
The activity that consists of breaking a job into its component tasks and then
analyzing each step for
potential hazards is called a _____. - ✔✔✔ANSWER-Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is
referred to as _____. - ✔✔✔ANSWER-Risk
, If there is a hole in the floor of a structure, the preferred method of protecting
workers from falls is to _____. - ✔✔✔ANSWER-Cover and mark it
The D-ring or support point on a safety harness should be placed _____. -
✔✔✔ANSWER-Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. -
✔✔✔ANSWER-Competent person
Lanyards that have no shock-absorbing features are used for _____. -
✔✔✔ANSWER-Positioning
When placing a ladder against a platform or roof, the top of the ladder should
extend above the point where
the ladder touches the platform or roof by at least _____. - ✔✔✔ANSWER-3 Feet
When performing overhead work on scaffolding, what protective measures must be
taken to prevent objects
from falling and striking a person below? - ✔✔✔ANSWER-toe boards, debris
nets, or canopies
When stacking materials such as bricks or block, do not stack materials beyond a
_____. - ✔✔✔ANSWER-4:1 Ratio
Benching systems are prohibited in _____. - ✔✔✔ANSWER-Type C
