FDOT ASPHALT PAVING LEVEL 1 EXAM LATEST 2024-
2025 WITH ACTUAL QUESTIONS AND CORRECT
VERIFIED ANSWERS ALREADY GRADED A+ 100%
GUARANTEED PASS!
S to N - ANSWER-Downstation
W to E - ANSWER-Downstation
Stationing - ANSWER-Starts at 0+00
Stationing Measurement - ANSWER-1+00 is 100 feet
Straight Edge is the - ANSWER-Measurement of Pavement smoothness with a
15 foot 4.573 m rolling straightedge
Straight Edge is used to - ANSWER-identify problems
Random sampling - ANSWER-Are random numbers generated usually by a VT
for cores to be extracted from the roadway
How often should you calibrate a Straight edge - ANSWER-Calibrate at the start
of each working period
, Using the manual straight edge you find what kind of spot to place the rolling
straightedge? - ANSWER-Locate a flat area with the manual straightedge and
place the rolling straightedge next to the manual straightedge and the gauge
should read 0
The 3/16 and the 3/8 shims go under which wheels during calibration -
ANSWER-The outside wheels to measure the low and the center to measure
the high. Gauge should read 3/16 on the 3/16 shim and vice versa for the 3/8
shims. Make sure the center wheel moves up and down freely.
Calibration materials for Straightedge - ANSWER-Rolling Straightedge
Manual Straightedge
Manual Measurement (ruler)
x4 3/16 shims 5mm thick
x4 3/8 shims 10mm thick
When to perform final straightedge - ANSWER-After an entire lane has been
paved
When to perform final straightedge - ANSWER-Pavement should be an ambient
temperature
You cannot use the straightedge until it has been properly - ANSWER-calibrated
When performing the straightedge procedure - ANSWER-Maintain proper
traffic management and safety
Cross slopes can be either done - ANSWER-Manually or with a smart level
2025 WITH ACTUAL QUESTIONS AND CORRECT
VERIFIED ANSWERS ALREADY GRADED A+ 100%
GUARANTEED PASS!
S to N - ANSWER-Downstation
W to E - ANSWER-Downstation
Stationing - ANSWER-Starts at 0+00
Stationing Measurement - ANSWER-1+00 is 100 feet
Straight Edge is the - ANSWER-Measurement of Pavement smoothness with a
15 foot 4.573 m rolling straightedge
Straight Edge is used to - ANSWER-identify problems
Random sampling - ANSWER-Are random numbers generated usually by a VT
for cores to be extracted from the roadway
How often should you calibrate a Straight edge - ANSWER-Calibrate at the start
of each working period
, Using the manual straight edge you find what kind of spot to place the rolling
straightedge? - ANSWER-Locate a flat area with the manual straightedge and
place the rolling straightedge next to the manual straightedge and the gauge
should read 0
The 3/16 and the 3/8 shims go under which wheels during calibration -
ANSWER-The outside wheels to measure the low and the center to measure
the high. Gauge should read 3/16 on the 3/16 shim and vice versa for the 3/8
shims. Make sure the center wheel moves up and down freely.
Calibration materials for Straightedge - ANSWER-Rolling Straightedge
Manual Straightedge
Manual Measurement (ruler)
x4 3/16 shims 5mm thick
x4 3/8 shims 10mm thick
When to perform final straightedge - ANSWER-After an entire lane has been
paved
When to perform final straightedge - ANSWER-Pavement should be an ambient
temperature
You cannot use the straightedge until it has been properly - ANSWER-calibrated
When performing the straightedge procedure - ANSWER-Maintain proper
traffic management and safety
Cross slopes can be either done - ANSWER-Manually or with a smart level
