AUTOMOTIVE COLLISION ASE PRACTICE EXAM
ACTUAL EXAM COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS 2024 (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW!!.
A dent in an aluminum panel is being repaired. technician A says that applying heat will
help the aluminum return to its undamaged state. technician B says that a non-contact
thermometer can be used to detect the temperature of the aluminum. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
A panel is being prepared for MIG welding. Technician A says to remove all coatings,
paints and primers from the weld area. Technician B says not to remove the galvanized
coating. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
When removing a door skin, Technician A says a cutting torch should be used to
separate the welded door skin from the door skin him flange. Technician B says a grinder
should be used to grind away the edge of the door skin. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that the hammer-off-dolly method will stretch the metal. technician B
says that the hammer-on-dolly method will stretch the metal. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that because we cannot know where the HSS (High Strength Steel) is
located on the vehicle, all sheet metal should be treated as HSS. technician B says the
body repair manual will sometimes identify those parts that are made of HSS. Who is
right?
A. A only
,B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
A technician complains of seeing white spots after welding. Technician A says to
complete the weld using a skip weld technique by starting in the middle of the joint and
working outwards in both directions, alternating welds. technician B says to set the
machine on the pulse setting and complete the weld by welding on the pulse setting in a
single direction. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
A long weld is to be made. After tackling the pieces together, technician A says to
complete the weld using a skip weld technique by starting in the middle of the joint and
working outwards in both directions, alternating welds. Technician B says to set the
machine on the pulse setting and complete the weld by welding on the pulse setting in a
single direction. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
Technician A says that the burn test can be used to identify plastic. technician B says
that the burn test creates toxic fumes. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that with the tack welding tip in place on the hot air welding, a welding
rod is not necessary to tack weld plastic parts. Technician B says that a plastic welding
rod may be required. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERA. A only
Technician A says that most thermosetting plastics can be fusion welded. technician B
says that thermoplastics can be fusion welded. Who is right?
A. A only
B. B only
C. Both A and B
, D. Neither A nor b - ANSWERB. B only
When performing an adhesive plastic repair, technician A says an adhesion promoter is
necessary if the base plastic is ground and it melts and smears. Technician B says the
adhesion promoter is required on plastics that do not melt and smear when ground. Who
is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERA. A only
Technician A says that TPO plastics can be repaired using the airless plastic welder.
Technician B says that TPO plastics can be repaired using adhesives. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
Rough cutting can be done with the oxyacetylene torch if enough room is left to trim the
heat-affected area. How much room is needed?
A. 1/2 inch
B. 2 inches
C. 4 inches
D. 6 inches - ANSWERC. 4 inches
An insurance appraiser writes and estimate on the repair of a door indicating the
replacement of the outer panel and a repair to the door frame. Once the outer skin is
removed, the technician discovers damage to the intrusion bearm. Technician A says the
repair to the beam is included in the provision for the repair of the door frame.
Technician B says it is not, and a separate procedure and line item on the bill is called
for. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor - ANSWERD. Neither a nor B
A car is brought into the shop after an authorization to commence work is obtained from
the customer. Having been stored outside for weeks and being covered with bird
drippings, technician A says the car needs to be washed with a solvent prior to
commencing work. Technician B says the car needs a wash with water and detergent
first. Who is right?
A. A only
B. B only
C. Both A and B
ACTUAL EXAM COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS 2024 (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW!!.
A dent in an aluminum panel is being repaired. technician A says that applying heat will
help the aluminum return to its undamaged state. technician B says that a non-contact
thermometer can be used to detect the temperature of the aluminum. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
A panel is being prepared for MIG welding. Technician A says to remove all coatings,
paints and primers from the weld area. Technician B says not to remove the galvanized
coating. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
When removing a door skin, Technician A says a cutting torch should be used to
separate the welded door skin from the door skin him flange. Technician B says a grinder
should be used to grind away the edge of the door skin. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that the hammer-off-dolly method will stretch the metal. technician B
says that the hammer-on-dolly method will stretch the metal. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that because we cannot know where the HSS (High Strength Steel) is
located on the vehicle, all sheet metal should be treated as HSS. technician B says the
body repair manual will sometimes identify those parts that are made of HSS. Who is
right?
A. A only
,B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
A technician complains of seeing white spots after welding. Technician A says to
complete the weld using a skip weld technique by starting in the middle of the joint and
working outwards in both directions, alternating welds. technician B says to set the
machine on the pulse setting and complete the weld by welding on the pulse setting in a
single direction. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
A long weld is to be made. After tackling the pieces together, technician A says to
complete the weld using a skip weld technique by starting in the middle of the joint and
working outwards in both directions, alternating welds. Technician B says to set the
machine on the pulse setting and complete the weld by welding on the pulse setting in a
single direction. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
Technician A says that the burn test can be used to identify plastic. technician B says
that the burn test creates toxic fumes. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that with the tack welding tip in place on the hot air welding, a welding
rod is not necessary to tack weld plastic parts. Technician B says that a plastic welding
rod may be required. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERA. A only
Technician A says that most thermosetting plastics can be fusion welded. technician B
says that thermoplastics can be fusion welded. Who is right?
A. A only
B. B only
C. Both A and B
, D. Neither A nor b - ANSWERB. B only
When performing an adhesive plastic repair, technician A says an adhesion promoter is
necessary if the base plastic is ground and it melts and smears. Technician B says the
adhesion promoter is required on plastics that do not melt and smear when ground. Who
is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERA. A only
Technician A says that TPO plastics can be repaired using the airless plastic welder.
Technician B says that TPO plastics can be repaired using adhesives. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
Rough cutting can be done with the oxyacetylene torch if enough room is left to trim the
heat-affected area. How much room is needed?
A. 1/2 inch
B. 2 inches
C. 4 inches
D. 6 inches - ANSWERC. 4 inches
An insurance appraiser writes and estimate on the repair of a door indicating the
replacement of the outer panel and a repair to the door frame. Once the outer skin is
removed, the technician discovers damage to the intrusion bearm. Technician A says the
repair to the beam is included in the provision for the repair of the door frame.
Technician B says it is not, and a separate procedure and line item on the bill is called
for. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor - ANSWERD. Neither a nor B
A car is brought into the shop after an authorization to commence work is obtained from
the customer. Having been stored outside for weeks and being covered with bird
drippings, technician A says the car needs to be washed with a solvent prior to
commencing work. Technician B says the car needs a wash with water and detergent
first. Who is right?
A. A only
B. B only
C. Both A and B
