• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 10 páginas
Examen

VA tattoo exam

Document preview thumbnail
Vista previa 2 fuera de 10 páginas

Exam of 10 pages for the course VA tattoo at VA tattoo (VA tattoo exam)

Vista previa del contenido

VA TATTOO EXAM QUESTIONS WITH
VERIFIED ANSWERS BY EXPERTS

k"the making of needles" Materials - - Flat Needle Bar

-round needle bar

- eye loop

-drill gauge: tightens needle

- souder



Making of needles process - -clean and sterilize after making needles

-Tin the soldering iron

-drop the needle into Jig, lightly tap to ensure all needles are even ( pointed side should be down )

-drop a small amount of flux at the end of the needle groupings, tap with soldering iron.



Diameter of a needle - Affects ink flow and puncture of the skin



Tapers

- Long Taper : Good for Lining

- Short Taper : Good for color



Coil Machine how does it work - Uses magnets to power machine which moves the armature bar and
needles towards the coil.



This pulls the needle into the skin, breaking the circuit, causing the needle to go back into the machine



Coil Machine : Electromagnet ON - coils are not charged, the armature bar is up, pulling the needle up -
Coil Machine : Electromagnet OFF- coils are charged, pulling the armature bar down, pulling the needle
down

, Tuning - voltage - -4 volts for shading

-5.5 volts for lining



Rotary



7-8 for either beginner lining or shading, 9-10 for lining



Tuning- CPs/Hertz - - Cycle per second

- 130 for lining

-120 for shading



How to adjust CPs/Hertz - - Adjust by moving contact screw

- Increase : moving closer to the front spring, this also shortens the stroke.

- Decrease: moving further from the front spring, this lengthens the stroke



Tuning: Stroke - -lining, shorter stoke 3mm

-Shading, grey wash, med stoke 3.5mm

-packing color, longer stroke, 4mm



Tuning: Duty - Measures how long the needle is in the skin



Duty below 50 - Machine is spending more time off than on during a cycle



This means the needle is spending too much time extended out into the skin, causing extra trauma to
the skin



Duty above 50 - The needle is spending too much time in the tube, causing the skin to not get enough
ink

Información del documento

Subido en
18 de octubre de 2024
Número de páginas
10
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$11.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
edunurse
3.6
(19)
Vendido
156
Seguidores
13
Artículos
6803
Última venta
1 semana hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes