• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 6 páginas
Examen

BPI Analyst Exam Study Guide with Complete Solutions

Document preview thumbnail
Vista previa 2 fuera de 6 páginas

BPI Analyst Exam Study Guide with Complete Solutions First Law of Thermodynamics - Answer-Energy is neither created nor destroyed. Equation calculates the area of a triangle. - Answer-1/2 base x height If a 200-watt bulb burns for 20 hours, how much energy does it use? - Answer-4 kWh Energy used if a 200,000 BTU/hr furnace runs for 4 hours - Answer-800,000 BTU Example of Energy efficiency - Answer-Reducing water consumption by a more efficient Domestic Hot Water tank (DHW). Wood placed in wet soil what moisture gradient will occur. - Answer-Wetness of the soil move into the wood. Total number of heating degree days (HDD), if Average temperature in January is 30 degrees (Assume a 65 degree indoor temp year round and Jan has 31 days) - Answer-1085 BTUs it takes to raise 1lb of water 1 degree F - Answer-1 Using devices that draw less energy is called... - Answer-energy efficiency First step before installing attic ventilation? - Answer-Verifying the presence of an effective Air & Thermal Barrier. EMILLECT 2024/2025 ACADEMIC YEAR ©2024 EMILLECT. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER, 2024 Page 2/6 Which Leakage Paths should be given the Highest Priority on the Work Scope? - Answer-To the Attic Stack Effect occurs when a BLDG is heated and... - Answer-the Warm air inside the BLDG is LESS DENSE than the colder air Outside. Parts of the BLDG shell - Answer-Roof, Walls, Windows NOT stairways When Thermal Imaging is NOT useful? - Answer-Outside temp is similar to indoor temp Easy Pathways for Heat Flow - Answer-walls, windows, ceilings NOT insulation Typical R-value R-19 means that... - Answer-All BLDG components (in a wall) Added together have a Thermal Resistance of 19 Air Exchange is estimated in... - Answer-Cubic Feet per minute (CFM) What is U-Value if R equals 50? - Answer-.02 U=1/R 1/50 Increasing the thickness of an Insulating Layer... - Answer-Increases the Thermal Resistance NRFC (National Fenestration Rating Council) developed a Rating System for _______ with a Scale of 1 to 100 - Answer-Condensation Resistance According to BPI Standards, the CAZ (Combustion Appliance Zone) depressurization limit for an Orphan Natural Draft Water Heater is... - Answer--2 Pa (Pascal) The temperature at which a volume of air can hold NO MORE Moisture is... - Answer-Dew Point EMILLECT 2024/2025 ACADEMIC YEAR ©2024 EMILLECT. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER, 2024 Page 3/6 If 5 cubic feet of air Exfiltrating from the BLDG, how much is Infiltrating? - Answer-5 cf (cubic feet) Home most effected by Stack Effect? - Answer-3-story BLDG Factors in Defining the Thermal Boundary? - Answer-shell's existing insulation level, effectiveness of the existing air barrier, incorporating potential areas of future use within the Thermal Boundary NOT the BLDGs interior design House depressurized to -50 pa, the pressure drop across the attic boundary is 25 pa, What is the probable explanation? - Answer-Ceiling and Roof are both partial air barriers. Fiberglass insulation sometimes recommended - Answer-Low cost

Vista previa del contenido

EMILLECT 2024/2025 ACADEMIC YEAR ©2024 EMILLECT. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER, 2024




BPI Analyst Exam Study Guide with
Complete Solutions

First Law of Thermodynamics - Answer✔✔-Energy is neither created nor destroyed.


Equation calculates the area of a triangle. - Answer✔✔-1/2 base x height


If a 200-watt bulb burns for 20 hours, how much energy does it use? - Answer✔✔-4 kWh


Energy used if a 200,000 BTU/hr furnace runs for 4 hours - Answer✔✔-800,000 BTU


Example of Energy efficiency - Answer✔✔-Reducing water consumption by a more efficient

Domestic Hot Water tank (DHW).


Wood placed in wet soil what moisture gradient will occur. - Answer✔✔-Wetness of the soil

move into the wood.


Total number of heating degree days (HDD), if Average temperature in January is 30 degrees

(Assume a 65 degree indoor temp year round and Jan has 31 days) - Answer✔✔-1085


BTUs it takes to raise 1lb of water 1 degree F - Answer✔✔-1


Using devices that draw less energy is called... - Answer✔✔-energy efficiency


First step before installing attic ventilation? - Answer✔✔-Verifying the presence of an effective

Air & Thermal Barrier.

Page 1/6

, EMILLECT 2024/2025 ACADEMIC YEAR ©2024 EMILLECT. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER, 2024


Which Leakage Paths should be given the Highest Priority on the Work Scope? - Answer✔✔-To

the Attic


Stack Effect occurs when a BLDG is heated and... - Answer✔✔-the Warm air inside the BLDG is

LESS DENSE than the colder air Outside.


Parts of the BLDG shell - Answer✔✔-Roof, Walls, Windows NOT stairways


When Thermal Imaging is NOT useful? - Answer✔✔-Outside temp is similar to indoor temp


Easy Pathways for Heat Flow - Answer✔✔-walls, windows, ceilings NOT insulation


Typical R-value R-19 means that... - Answer✔✔-All BLDG components (in a wall) Added together

have a Thermal Resistance of 19


Air Exchange is estimated in... - Answer✔✔-Cubic Feet per minute (CFM)


What is U-Value if R equals 50? - Answer✔✔-.02 U=1/R 1/50


Increasing the thickness of an Insulating Layer... - Answer✔✔-Increases the Thermal Resistance


NRFC (National Fenestration Rating Council) developed a Rating System for


_______ with a Scale of 1 to 100 - Answer✔✔-Condensation Resistance


According to BPI Standards, the CAZ (Combustion Appliance Zone) depressurization limit for an

Orphan Natural Draft Water Heater is... - Answer✔✔--2 Pa (Pascal)


The temperature at which a volume of air can hold NO MORE Moisture is... - Answer✔✔-Dew

Point

Page 2/6

Información del documento

Subido en
16 de octubre de 2024
Número de páginas
6
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$10.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
Emillect
3.0
(4)
Vendido
34
Seguidores
2
Artículos
2999
Última venta
4 meses hace




Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes