EMILLYCHARLOTTE 2024/2025 ACADEMIC YAER ©2024 EMILLYCHARLOTTE. ALL RIGHTS RESERVED
FIRST PUBLISH SEPTEMBER 2024
ADDA Mechanical Drafter Certification
Practice - Part I Study Guide
orthographic - Answer✔✔-A multiview drawing is also known a(n) __________ drawing.
auxiliary - Answer✔✔-A(n) __________ view is projected from an inclined surface.
section - Answer✔✔-A(n) __________ view allows you to see the interior of an object.
removed - Answer✔✔-A(n) __________ section is usually not aligned with a the primary view.
offset - Answer✔✔-A(n) __________ section shows interior features not in a straight line by bending the
cutting plane line at 90° angles.
viewing plane line - Answer✔✔-The __________ indicates the position of a removed view and line of
sight.
cutting plane line - Answer✔✔-The line showing where an object is cut for a section and line of sight is
the __________.
size - Answer✔✔-An object can be made if its __________ and shape are fully-described.
shape - Answer✔✔-An object can be made if its size and __________ are fully-described.
bevel - Answer✔✔-A(n) __________ is a slanted surface along a straight edge.
chamfer - Answer✔✔-A(n) __________ is a slanted surface along a hole or the end of a cylinder.
Page 1/3
FIRST PUBLISH SEPTEMBER 2024
ADDA Mechanical Drafter Certification
Practice - Part I Study Guide
orthographic - Answer✔✔-A multiview drawing is also known a(n) __________ drawing.
auxiliary - Answer✔✔-A(n) __________ view is projected from an inclined surface.
section - Answer✔✔-A(n) __________ view allows you to see the interior of an object.
removed - Answer✔✔-A(n) __________ section is usually not aligned with a the primary view.
offset - Answer✔✔-A(n) __________ section shows interior features not in a straight line by bending the
cutting plane line at 90° angles.
viewing plane line - Answer✔✔-The __________ indicates the position of a removed view and line of
sight.
cutting plane line - Answer✔✔-The line showing where an object is cut for a section and line of sight is
the __________.
size - Answer✔✔-An object can be made if its __________ and shape are fully-described.
shape - Answer✔✔-An object can be made if its size and __________ are fully-described.
bevel - Answer✔✔-A(n) __________ is a slanted surface along a straight edge.
chamfer - Answer✔✔-A(n) __________ is a slanted surface along a hole or the end of a cylinder.
Page 1/3
