• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 11 páginas
Examen

Juniper SRX

Document preview thumbnail
Vista previa 2 fuera de 11 páginas

What are two valid JIMS event log sources?(Choose two ) - answer-Microsoft active directory server event logs Microsoft Exchange Server event logs You want to create an out-of-band management zone and assign interface ge-0/0/0.0 to that zone. Which command would you use to configure this assignment? - answer-set security zones functional-zone management interfaces ge-0/0/0.0 Which two statements are true about route-based IPsec VPNs on SRX Series devices?(Choose two.) - answer-Route-based VPNs cannot be used to configure remote access or dialup VPNs. DSCP bits cannot be re-written on the inner IP header of an ESP packet that was created or forwarded using a route-based VPN. Which two statements are true regarding the first-packet path and fast-path processing of an SRX Series device?(Choose two.) - answer-Screens are applied for both first and consecutive packets of a flow. Policy lookup is performed only for the first packet of a flow. Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2. Which is a potential cause for this problem? - answer-The security policy from the trust zone to the untrust zone does not permit ping. The AppQoE module of AppSecure provides which function? - answer-The AppQoE module provides routing, based on network conditions. Referring to the exhibit, failover to Node 0 occurred for Redundancy Group 2 because of an interface failure. The interface has since been restored, but Node 0 is still the primary node for Redundancy Group 2. Which two actions will restore Node 1 as the primary node for Redundancy Group 2? - answer-Configure preempt under Redundancy Group 2 Manually fail over to Redundancy Group 2. Which statement is true about SurfControl integrated Web filter solution? - answer-The SurfControl server in the cloud provides the SRX device with only the category of the URL. Which two statements are true when configuring security zones?(Choose two.) - answer-You can assign one or more logical interfaces to a zone You can assign one or more logical interfaces to a routing instance. Your internal webserver uses port 8088 for inbound connections. You want to allow external HTTP traffic to connect to the webserver. Which two actions would accomplish this task?(Choose two.) - answer-Create a custom application for port 8088 and create a security policy that permits the custom-http application. Use destination NAT to remap incoming traffic from port 80 to port 8088. You must configure an IPsec VPN on an SRX Series device. The IPsec VPN will be used for employees to remotely access the corporate network. Remote employees are assigned a dynamic address. Which type of VPN should you configure for this scenario? - answer-policy-based VPN Which three statements are correct regarding a functional zone on SRX Series devices?(Choose three.) - answer-It can define only one management zone. It does not forward traffic It cannot be specified in a policy to control traffic flow. What are three characteristics of session-based forwarding, compared to packet-based forwarding, on an SRX Series device? - answer-Session-based forwarding performs faster processing of existing session Session-based forwarding uses stateful packet processing Session-based forwarding uses six tuples of information. You have a chassis cluster established between two SRX Series devices. You re monitoring the status of the cluster and notice that some redundancy groups show disabled. What are two explanations for this behavior? - answer-The fab interface is down The fxp1 interface is down The output of show security flow sessions is shown in the exhibit. From this output, which type of NAT is configured? - answer-static source NAT The DNS ALG performs which three functions?(Choose three) - answer-The DNS ALG performs DNS doctoring The DNS ALG performs the IPv4 and IPv6 address transformations The DNS ALG modifies the DNS payload in NAT mode Which statement is true about real-time objects in an SRX chassis cluster? - answer-Real-time objects are exchanged over the fab links to synchronize session table entries. You want to protect against attacks on interfaces in ZoneA. You create a Junos Screen option called no-flood and commit the configuration. In the weeks that follow, the Screen does not appear to be working; whenever you enter the command show security screen statistics zone ZoneA, all counters show 0. What would solve this problem? Response: - answer-[edit security zones security-zone ZoneA]user@host# set screen no-flood Which two statements are correct regarding IPSec security associations on the SRX Series devices?(Choose two.) - answer-IKE SA is bidirectional. IPSec SAs are established during Phase 2 negotiations. After a security policy is applied, which operational command output will display the policy index number? - answer-show security policies You want to use Sky ATP to protect your network, however, company policy does not allow you to send any files to the cloud. Which sky ATP feature should you use in this situation? - answer-Only use cloud-based Sky ATP file blacklists Which SRX5400 component is responsible for forwarding a packet? - answer-IOC Which statement is true regarding the integrated user firewall feature on SRX Series devices? Response: - answer-The integrated user firewall feature enforces access control without the need for client agent Which two actions occur during IKE Phase 1? - answer-A secure channel is established between two peers. The Diffie-Hellman key exchange algorithm establishes a shared key for encryption. Which two statements are correct about server-protection SSL proxy?(Choose two.) - answer-The server-protection SSL proxy is also known as SSL reverse proxy. The server-protection SSL proxy acts as the server from the client's perspective What are two management methods for cSRX? - answer-CLI Contrail You must ensure that all encrypted traffic passing through your SPX device uses strong protocols and ciphers. Which feature should you implement to satisfy this requirement? - answer-AppSecure SSL proxy Which three functions are provided specifically by Junos security platforms? - answer-NAT Inspection of packets at Layer 4 and higher VPN establishment A route-based VPN is required for which scenario? - answer-when a dynamic routing protocol is required across the VPN and GRE cannot be used You have just manually failed over Redundancy Group 0 on Node 0 to Node 1. You notice Node 0 is now in a secondary-hold state. Which statement is correct? - answer-The previous primary node moves to the secondary-hold state and stays there until the hold-down interval expires, after which it moves to the secondary state. At which two levels of the Junos CLI can the host-inbound-traffic parameter be configured? - answer-[edit security zones security-zone trust] [edit security zones security-zone trust interfaces ge-0/0/0.0] You issued a factory reset to your SRX210 and ping the vlan 0 interface from hosts in both the trust and untrust zones. Which two results do you expect? - answer-Pings from the trust zone receive a reply Pings from the untrust zone fail You must configure JSA to accept events from an unsupported third-party log source. In this scenario, what should you do? - answer-Configure a universal device service module. You are configuring an SRX Series device with policy rematching disabled. You change a permit policy to have an action of deny and commit the configuration. Which statement is true? - answer-Existing sessions matching the policy continue uninterrupted. While reviewing the logs on your SRX240 device, you notice SYN floods coming from multiple hosts out on the Internet. Which Junos Screen option would protect against these denial-of-service (DoS) attacks? - answer-[edit security screen]user@host# showids-option no-flood {limit-session {destination-ip-based 150;}} Which statement is true about the NAT rule action off? - answer-It is useful for detailed control of NAT. You are deploying the Junos application firewall in your network. In this scenario, which two elements are mapped to application system cache? - answer-Destination port Destination IP address You are creating a destination NAT rule-set. Which two match criteria are valid for use with the from clause? - answer-Routing-instance Interface When using chassis clustering, which link is responsible for configuration synchronization? - answer-fxp1 The branch SRX Series Services Gateways implement the data plane on which two components?(Choose two.) - answer-CPU cores PIMs Which statement is true regarding the integrated user firewall feature on SRX Series devices? - answer-The integrated user firewall feature enforces access control without the need for client agents. Which two statements are correct about packet handling on SRX Series devices? - answer-The device performs policy lookup only for the first packet of a flow. The device applies Screen options for both the first and consecutive packets of a flow. Which statement true about JATP Incidents? - answer-Incidents consist of all the events associated with a signal threat A packet that belongs to an existing session enters your SRX Series device. Your SRX Series device is operating in its default mode. Which two statements about ingress processing are true? - answer-The packet is processed through the fast path. The packet is subject to stateless filters

Vista previa del contenido

Juniper SRX
What are two valid JIMS event log sources?(Choose two ) - answer-Microsoft active directory server
event logs
Microsoft Exchange Server event logs

You want to create an out-of-band management zone and assign interface ge-0/0/0.0 to that zone.
Which command would you use to configure this assignment? - answer-set security zones functional-
zone management interfaces ge-0/0/0.0

Which two statements are true about route-based IPsec VPNs on SRX Series devices?(Choose two.) -
answer-Route-based VPNs cannot be used to configure remote access or dialup VPNs.

DSCP bits cannot be re-written on the inner IP header of an ESP packet that was created or forwarded
using a route-based VPN.

Which two statements are true regarding the first-packet path and fast-path processing of an SRX Series
device?(Choose two.) - answer-Screens are applied for both first and consecutive packets of a flow.
Policy lookup is performed only for the first packet of a flow.

Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2. Which is a potential cause for this
problem? - answer-The security policy from the trust zone to the untrust zone does not permit ping.

The AppQoE module of AppSecure provides which function? - answer-The AppQoE module provides
routing, based on network conditions.

Referring to the exhibit, failover to Node 0 occurred for Redundancy Group 2 because of an interface
failure. The interface has since been restored, but Node 0 is still the primary node for Redundancy
Group 2.
Which two actions will restore Node 1 as the primary node for Redundancy Group 2? - answer-Configure
preempt under Redundancy Group 2 Manually fail over to Redundancy Group 2.

Which statement is true about SurfControl integrated Web filter solution? - answer-The SurfControl
server in the cloud provides the SRX device with only the category of the URL.

Which two statements are true when configuring security zones?(Choose two.) - answer-You can assign
one or more logical interfaces to a zone
You can assign one or more logical interfaces to a routing instance.

Your internal webserver uses port 8088 for inbound connections. You want to allow external HTTP traffic
to connect to the webserver. Which two actions would accomplish this task?(Choose two.) - answer-
Create a custom application for port 8088 and create a security policy that permits the custom-http
application.
Use destination NAT to remap incoming traffic from port 80 to port 8088.

, You must configure an IPsec VPN on an SRX Series device. The IPsec VPN will be used for employees to
remotely access the corporate network. Remote employees are assigned a dynamic address. Which type
of VPN should you configure for this scenario? - answer-policy-based VPN

Which three statements are correct regarding a functional zone on SRX Series devices?(Choose three.) -
answer-It can define only one management zone.
It does not forward traffic
It cannot be specified in a policy to control traffic flow.

What are three characteristics of session-based forwarding, compared to packet-based forwarding, on
an SRX Series device? - answer-Session-based forwarding performs faster processing of existing session
Session-based forwarding uses stateful packet processing
Session-based forwarding uses six tuples of information.

You have a chassis cluster established between two SRX Series devices. You re monitoring the status of
the cluster and notice that some redundancy groups show disabled. What are two explanations for this
behavior? - answer-The fab interface is down
The fxp1 interface is down

The output of show security flow sessions is shown in the exhibit. From this output, which type of NAT is
configured? - answer-static source NAT

The DNS ALG performs which three functions?(Choose three) - answer-The DNS ALG performs DNS
doctoring
The DNS ALG performs the IPv4 and IPv6 address transformations
The DNS ALG modifies the DNS payload in NAT mode

Which statement is true about real-time objects in an SRX chassis cluster? - answer-Real-time objects
are exchanged over the fab links to synchronize session table entries.

You want to protect against attacks on interfaces in ZoneA. You create a Junos Screen option called no-
flood and commit the configuration.
In the weeks that follow, the Screen does not appear to be working; whenever you enter the command
show security screen statistics zone ZoneA, all counters show 0. What would solve this problem?
Response: - answer-[edit security zones security-zone ZoneA]user@host# set screen no-flood

Which two statements are correct regarding IPSec security associations on the SRX Series devices?
(Choose two.) - answer-IKE SA is bidirectional.
IPSec SAs are established during Phase 2 negotiations.

After a security policy is applied, which operational command output will display the policy index
number? - answer-show security policies

You want to use Sky ATP to protect your network, however, company policy does not allow you to send
any files to the cloud. Which sky ATP feature should you use in this situation? - answer-Only use cloud-
based Sky ATP file blacklists

Información del documento

Subido en
30 de septiembre de 2024
Número de páginas
11
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$11.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes