• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 4 fuera de 40 páginas
Examen

Six Sigma: Measure Phase Notes

Document preview thumbnail
Vista previa 4 fuera de 40 páginas

Main Objective of the Measure State - answer-Main Objective of the Measure State: 1) Data gathering to complete project. 2) Team defines each relevant process in great detail. 3) Group of metrics for the process is developed 4) Measurement analysis is conducted to identify and quantify any common errors in the metric that is selected. 5) Estimation of process baselines to determine a reasonable starting point. Definition of Process Analysis and Documentation - answer-Definition of Process Analysis and Documentation 1) Process= set of interrelated resources and activities that transform input into outputs with the objective of adding value. 2) Activities within any process should be documented and controlled Two key advantages of Process Mapping - answer-Two key advantages of Process Mapping: 1) Depicts process using symbols, arrow, and words without the clutter of sentences 2) Can be used outline new procedures 3) Can be used to review old procedures for viability and thoroughness 4 Tools in Process Analysis and Documentation - answer-4 Tools in Process Analysis and Documentation: 1) Flow charts 2) Process Maps 3) Written Procedures 4) Work Instructions What are Process Maps and Flowcharts Used for? - answer-What are Process Maps and Flowcharts Used for? 1) Provide a visual depiction of their process information for customers and suppliers (SIPOC) 2) Serves as the first step in improving process when used in conjunction with FMEA and value stream mapping. What is the difference between process map and flowchart? - answer-What is the difference between process map and flowchart? 1) Process maps = Broad perspective of problems/ opportunities for improvement; Provides additional information about each step (Eg. cost, setup time, cycle time, inventory, types of defects); Can be used to detect non-value-added steps and complexities. 2) Flowcharts = show each step in the process, decision points, inputs, and outputs.; creates a picture of the actual steps in the process or system as it actually operates. Flow charts = analytical tool for monitoring process over TIME; used for training operators and supervisors. Describe Process Definition - answer-Describe Process Definition 1) First step in Measure Stage= Create a comprehensive process level map of processes currently performed.----aka. group describes all the activities that they plan to improve 2) Expert employee participation needed to create detailed process map because employees have a different conception of process sequence than their superiors. 3) Employees, often , would have streamlined and modified process with notification of management--- harmful to criticize or judge the customization made by employees------ best to focus on creating an accurate process map. Three types of Flow Charts - answer-Three types of Flow Charts: 1) Person-to-person 2) Action -to-action 3) Conceptual Why are processes measured? - answer-Why are processes measured? 1) Process input variables are measured to control variation in output responses. 2) The effects of variations of input on output are explored using tools (eg. scatter diagrams, relationship matrices, fishbone diagram) 3) Through understanding of process inputs and outputs is key to step for process improvements. Describe the importance of identifying key decision points during Measure stage - answer-Describe the importance of identifying key decision points during Measure stage 1) After creating a process map, must identify the important decision made during the process. 2) Team members are alert to areas of inefficiency, requiring excess decision-making. 3) Team should try to reduce the number of decision made every time a process is performed. 4) Since process has not been measured, then all measurements must reflect the process as typically performed---- to ensure proper targeting of improvement efforts. 5) Team leaders communicate info to stakeholders. How can a process inputs and outputs be identified? - answer-How can a process inputs and outputs be identified? 1) Process can measured and improved by identifying its inputs and outputs 2) Process inputs can be quantified as raw materials, human resources, or some upstream process. Process input requirements should be stated so key measures of input quality can be controlled. 3) Once process capabilities are known, output measures can be used to determine whether the process has remained in control. Tools for documenting process inputs and outputs ? - answer-Tools for documenting process inputs and outputs ? 1) Cause-and-effect diagrams 2) Relational matrices 3) Flow charts Role of Feedback in measuring process - answer-Role of Feedback in measuring process 1) Feedback from downstream process measurements can be used to improve upstream process 2) Interrelationships between organizational feedback system is the target for planned experimentation for designing for six sigma 3) Designing for six sigma= the use of planned experimentation of isolate several process variables to eliminates potential sources of error. 4 benefits of SIPOC - answer-3 benefits of SIPOC 1) Display of cross functional activities in single, simple diagram 2) "Big picture" perspective to which additional detail can be added 3) Framework applicable to either large organizations or smaller projects. 4) Quickly familiarizes the team with the process at the organizational levels and project scope. Risk of using SIPOC - answer-Risk of using SIPOC 1) Making the diagram too detailed may details the focus of the sigma projects 2) Best to limit to 4-7 process blocks to keep clarity Function of SIPOC - answer-Function of SIPOC 1) Identifies essential work flows and sources of variation in work over time 2) Captures key components of success from suppliers through internal processes and on to key customers 3) Other tools (affinity diagrams, process mapping, flow charting) can be used to identify major blocs or steps in the process/ system Describe the use of enumerative statistics in process baseline estimation - answer-Describe the use of enumerative statistics in process baseline estimation 1) In estimation of a process baseline, enumerative statistics used to evaluate random samples from populations. 2) Enumerative statistics can determine whether samples represent the population, meaning that they were drawn without bias. 3) Confience level intervals of 95% used. 4) Drawback of Enumerative Statistics---- they are drawn from static, unchanging population.--but Six Sigma needs information from dynamic process and uses analytical statistics. Use of Analytical statistics to estimation of process baseline - answer-Use of Analytical statistics to estimation of process baseline 1) Analytical statics ---used to distinguish special and common cause variation in dynamic, moving processes. 2) Statistical process control---operational defintion of special cause variation---notes the location and level of variation. Discuss the identification of process metrics during the Measure Stage - answer-Discuss the identification of process metrics during the Measure Stage: 1) Factors critical to schedule (CTS) ---- impact project completion date 2) Factors critical to quality (CTQ) ----Direct effect on the desired characteristics of the product/ service. 3) Factors Critical to Cost (CTC)---- impact materials, labor, delivery, overhead, inventory and/or cost to the consumer of the good or service. 4) Metrics should be customer-focused and transparent; that is they should be objective 5) Metrics need to repeatable and reproducible Describe Critical-to-Cost metrics - answer-Describe Critical-to-Cost metrics 1) identifies areas of the process that raise the expense 2) Should not include only the typical cost of task, but also the increased cost of errors in the performance of this task. 3) Should include the probability of the error. 4) If lag time is present--- Include the cost of keeping product on hand Why are work procedures and work instructions a necessity? - answer-Why are work procedures and work instructions a necessity? Worldwide demand for ISO 9001 compliance makes necessity for work instructions and work procedures. ISO requires that internal procedures to control nonconforming products so the it is presented from inadvertent use or installation. (Assigned to Quality Dept) They help drive consistency in business and manufacturing. Consistent approach to process management helps yield improvements, root cause analysis and traceability. Function of Written Procedures - answer-Function of Written Procedures Describes: 1) What is done during the process? 2) Why it is done (Business reason) 3) Where it is done ( Location/ process step) 4) When it is done (trigger) Function of Written Instructions - answer-Function of Written Instructions: 1) Who does what (personnel with specific skill set) 2) How it is done (step by step) What is the difference between Written procedures and Written Instructions? - answer-What is the difference between Written procedures and Written Instructions? Procedures = describe the process at general level Work Instructions = provide details and step-by-step sequence of activities. What is a method? - answer-Method: An UNWRITTEN process that must be followed consistently---usually an internal procedure for a particular activity that is not required by any standard. Factors to consider when creating work instructions - answer-Factors to consider when creating work instructions 1) Keep Controlled copies of work instructions where activities performed 2) Can use flow charts with work instructions to show relationship of process steps 3) Consider the level of detail and its appropriateness of the background, experience, and skills of personnel. 4) Involve the people that perform activities when creating work instructions Ways to document Work Instructions - answer-Ways to document Work Instructions 1) Written instructions 2) Checklists 3) Flowcharts 4) Photographs 5) Drawn pictures 6) Videos 7) Electronic screen shots 8) Electronic software-driven process steps What factors should be considered when determining which process should be documented? - answer-What factors should be considered when determining which process should be documented? 1) Effect on quality 2) Risk of customer dissatisfaction 3) Statutory and/or regulatory requirements 4) Economic Risk 5) Effectiveness and efficiency 6) Competence of personnel 7) Complexity of process Types of Process Inputs - answer-Types of Process Inputs: 1) Needs (2) Ideas (3) Exceptions (4) Requirements 5) Information 6) Data (7) Documents (8) Resources Types of process outputs - answer-Types of process outputs 1) Designs 2) Decisions 3) Measurements 4) Products/ Services 5)Authorizations 7) Actions 8) Solutions 9) Proposals Describe Critical-to-Quality Metrics - answer-Describe Critical-to-Quality Metrics Definition= amount of money required to align a product/service with quality baselines 1) Yeild--amount of completed product divided by the amount of product that began the process.--- Does not aid in location of process errors or tell which parts can be salvaged 2) If the yeild= 95%, then scrap rate is 5% 3) Rolled Throughput ---average % of units with no defects---measures the expected quality level after several steps ----better than yeild Describe the Critical-to-Schedule Metrics - answer-Describe the Critical-to-Schedule Metrics 1) Cycle time= most common metric----aka. delivery time, order processing time, or downtime. 2) Requires distinction between NVA and VA activities to improve Cycle time 3) Cycle time is secondary in importance to cost or quality. Describe the process performance indices, including their application to the measure stage of DMAIC - answer-Describe the process perfoRmance indices, including their application to the measure stage of DMAIC 1) Process performanc index--- tells whether a particular batch of material will be satisfactory to customer 2) Key difference between process performance index and process capability--- Pp limited to single batch. 3) Process performance index used to create process baseline estimates for uncontrolled processes------ requires large sample size. 4) Statistical control is preferred over Process performance index but can't be done if process lacks

Vista previa del contenido

Six Sigma Measure Phase Notes

Main Objective of the Measure State - answer-Main Objective of the Measure State:

1) Data gathering to complete project.
2) Team defines each relevant process in great detail.
3) Group of metrics for the process is developed
4) Measurement analysis is conducted to identify and quantify any common errors in the metric that is
selected.
5) Estimation of process baselines to determine a reasonable starting point.

Definition of Process Analysis and Documentation - answer-Definition of Process Analysis and
Documentation

1) Process= set of interrelated resources and activities that transform input into outputs with the
objective of adding value.

2) Activities within any process should be documented and controlled

Two key advantages of Process Mapping - answer-Two key advantages of Process Mapping:

1) Depicts process using symbols, arrow, and words without the clutter of sentences

2) Can be used outline new procedures

3) Can be used to review old procedures for viability and thoroughness

4 Tools in Process Analysis and Documentation - answer-4 Tools in Process Analysis and Documentation:

1) Flow charts
2) Process Maps
3) Written Procedures
4) Work Instructions

What are Process Maps and Flowcharts Used for? - answer-What are Process Maps and Flowcharts Used
for?

1) Provide a visual depiction of their process information for customers and suppliers (SIPOC)
2) Serves as the first step in improving process when used in conjunction with FMEA and value stream
mapping.

What is the difference between process map and flowchart? - answer-What is the difference between
process map and flowchart?

,1) Process maps = Broad perspective of problems/ opportunities for improvement; Provides additional
information about each step (Eg. cost, setup time, cycle time, inventory, types of defects); Can be used
to detect non-value-added steps and complexities.

2) Flowcharts = show each step in the process, decision points, inputs, and outputs.; creates a picture of
the actual steps in the process or system as it actually operates.

Flow charts = analytical tool for monitoring process over TIME; used for training operators and
supervisors.

Describe Process Definition - answer-Describe Process Definition

1) First step in Measure Stage= Create a comprehensive process level map of processes currently
performed.----aka. group describes all the activities that they plan to improve

2) Expert employee participation needed to create detailed process map because employees have a
different conception of process sequence than their superiors.

3) Employees, often , would have streamlined and modified process with notification of management--->
harmful to criticize or judge the customization made by employees------> best to focus on creating an
accurate process map.

Three types of Flow Charts - answer-Three types of Flow Charts:

1) Person-to-person
2) Action -to-action
3) Conceptual

Why are processes measured? - answer-Why are processes measured?

1) Process input variables are measured to control variation in output responses.

2) The effects of variations of input on output are explored using tools (eg. scatter diagrams, relationship
matrices, fishbone diagram)

3) Through understanding of process inputs and outputs is key to step for process improvements.

Describe the importance of identifying key decision points during Measure stage - answer-Describe the
importance of identifying key decision points during Measure stage

1) After creating a process map, must identify the important decision made during the process.

2) Team members are alert to areas of inefficiency, requiring excess decision-making.

3) Team should try to reduce the number of decision made every time a process is performed.

4) Since process has not been measured, then all measurements must reflect the process as typically
performed----> to ensure proper targeting of improvement efforts.

,5) Team leaders communicate info to stakeholders.

How can a process inputs and outputs be identified? - answer-How can a process inputs and outputs be
identified?

1) Process can measured and improved by identifying its inputs and outputs

2) Process inputs can be quantified as raw materials, human resources, or some upstream process.
Process input requirements should be stated so key measures of input quality can be controlled.

3) Once process capabilities are known, output measures can be used to determine whether the process
has remained in control.

Tools for documenting process inputs and outputs ? - answer-Tools for documenting process inputs and
outputs ?

1) Cause-and-effect diagrams
2) Relational matrices
3) Flow charts

Role of Feedback in measuring process - answer-Role of Feedback in measuring process

1) Feedback from downstream process measurements can be used to improve upstream process

2) Interrelationships between organizational feedback system is the target for planned experimentation
for designing for six sigma

3) Designing for six sigma= the use of planned experimentation of isolate several process variables to
eliminates potential sources of error.

4 benefits of SIPOC - answer-3 benefits of SIPOC

1) Display of cross functional activities in single, simple diagram

2) "Big picture" perspective to which additional detail can be added

3) Framework applicable to either large organizations or smaller projects.

4) Quickly familiarizes the team with the process at the organizational levels and project scope.

Risk of using SIPOC - answer-Risk of using SIPOC

1) Making the diagram too detailed may details the focus of the sigma projects

2) Best to limit to 4-7 process blocks to keep clarity

Function of SIPOC - answer-Function of SIPOC

, 1) Identifies essential work flows and sources of variation in work over time
2) Captures key components of success from suppliers through internal processes and on to key
customers
3) Other tools (affinity diagrams, process mapping, flow charting) can be used to identify major blocs or
steps in the process/ system

Describe the use of enumerative statistics in process baseline estimation - answer-Describe the use of
enumerative statistics in process baseline estimation

1) In estimation of a process baseline, enumerative statistics used to evaluate random samples from
populations.

2) Enumerative statistics can determine whether samples represent the population, meaning that they
were drawn without bias.

3) Confience level intervals of 95% used.

4) Drawback of Enumerative Statistics----> they are drawn from static, unchanging population.--but Six
Sigma needs information from dynamic process and uses analytical statistics.

Use of Analytical statistics to estimation of process baseline - answer-Use of Analytical statistics to
estimation of process baseline

1) Analytical statics ---used to distinguish special and common cause variation in dynamic, moving
processes.

2) Statistical process control---operational defintion of special cause variation---notes the location and
level of variation.

Discuss the identification of process metrics during the Measure Stage - answer-Discuss the
identification of process metrics during the Measure Stage:

1) Factors critical to schedule (CTS) ----> impact project completion date

2) Factors critical to quality (CTQ) ---->Direct effect on the desired characteristics of the product/ service.

3) Factors Critical to Cost (CTC)----> impact materials, labor, delivery, overhead, inventory and/or cost to
the consumer of the good or service.

4) Metrics should be customer-focused and transparent; that is they should be objective

5) Metrics need to repeatable and reproducible

Describe Critical-to-Cost metrics - answer-Describe Critical-to-Cost metrics

1) identifies areas of the process that raise the expense

Información del documento

Subido en
30 de septiembre de 2024
Número de páginas
40
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$14.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes