SACA CERTIFICATION C101 EXAM | ALL
QUESTIONS AND CORRECT ANSWERS |
ALREADY GRADED A+ | VERIFIED
ANSWERS | LATEST VERSION (JUST
RELEASED)
If the energy sources are shut down, what would this mean for a pneumatic
valve? ------CORRECT ANSWER---------------It is closed
What are the 5 steps of electrical Lockout/tagout ------CORRECT
ANSWER---------------1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
Which of the following is a common cause of workplace death? ------
CORRECT ANSWER---------------Falls
The process of identifying potential hazards in the workplace is known as a
__________. ------CORRECT ANSWER---------------Hazard assessment
An injury is defined as physical harm to the body that happens as a result
of exposure to some form of energy that exceeds the body's tolerance. Is
this statement TRUE or FALSE? ------CORRECT ANSWER---------------
TRUE
,In the event of an evacuation alarm, employees should __________. ------
CORRECT ANSWER---------------Shut down their machines and leave the
building
After exposure to most chemicals the eyes should be flushed continuously
for __________ minutes. ------CORRECT ANSWER---------------15
Grease is made from a liquid lubricant with what added to it to make it
semi-solid? ------CORRECT ANSWER---------------Thickeners
What does the GHS hazardous material classification systems use to
identify the danger of a material? ------CORRECT ANSWER---------------
Pictograms
Every Safety Data Sheet must follow the same format that has __________
sections. ------CORRECT ANSWER---------------16
Safe handling procedures of chemicals are found in the __________. ------
CORRECT ANSWER---------------SDS
__________ is a system that rotates chemical stock to ensure they are
used within their shelf life. ------CORRECT ANSWER---------------First in,
first out
, An orange DOT label indicates the material is __________. ------
CORRECT ANSWER---------------Explosive
Before shipping a hazardous material, review the __________, which
provides directions for packaging, labels, UN ID, and required paperwork
for shipment. ------CORRECT ANSWER---------------DOT Hazardous
Materials Table
The first step in fire and electrical safety is __________. ------CORRECT
ANSWER---------------Educating employees on fire hazards and prevention
When welding, keep combustible material at least __________ away from
the area. ------CORRECT ANSWER---------------35 feet (10.6 meters)
OSHA requires __________ inspections of fire extinguishers. ------
CORRECT ANSWER---------------Monthly
A safe work place begins by designing in safety by creating a(n)
__________. ------CORRECT ANSWER---------------Standard operating
procedure
OSHA requires elevated work surfaces to have guards if the surface is
__________ above ground. ------CORRECT ANSWER---------------4 feet
(1.2 meters)
QUESTIONS AND CORRECT ANSWERS |
ALREADY GRADED A+ | VERIFIED
ANSWERS | LATEST VERSION (JUST
RELEASED)
If the energy sources are shut down, what would this mean for a pneumatic
valve? ------CORRECT ANSWER---------------It is closed
What are the 5 steps of electrical Lockout/tagout ------CORRECT
ANSWER---------------1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
Which of the following is a common cause of workplace death? ------
CORRECT ANSWER---------------Falls
The process of identifying potential hazards in the workplace is known as a
__________. ------CORRECT ANSWER---------------Hazard assessment
An injury is defined as physical harm to the body that happens as a result
of exposure to some form of energy that exceeds the body's tolerance. Is
this statement TRUE or FALSE? ------CORRECT ANSWER---------------
TRUE
,In the event of an evacuation alarm, employees should __________. ------
CORRECT ANSWER---------------Shut down their machines and leave the
building
After exposure to most chemicals the eyes should be flushed continuously
for __________ minutes. ------CORRECT ANSWER---------------15
Grease is made from a liquid lubricant with what added to it to make it
semi-solid? ------CORRECT ANSWER---------------Thickeners
What does the GHS hazardous material classification systems use to
identify the danger of a material? ------CORRECT ANSWER---------------
Pictograms
Every Safety Data Sheet must follow the same format that has __________
sections. ------CORRECT ANSWER---------------16
Safe handling procedures of chemicals are found in the __________. ------
CORRECT ANSWER---------------SDS
__________ is a system that rotates chemical stock to ensure they are
used within their shelf life. ------CORRECT ANSWER---------------First in,
first out
, An orange DOT label indicates the material is __________. ------
CORRECT ANSWER---------------Explosive
Before shipping a hazardous material, review the __________, which
provides directions for packaging, labels, UN ID, and required paperwork
for shipment. ------CORRECT ANSWER---------------DOT Hazardous
Materials Table
The first step in fire and electrical safety is __________. ------CORRECT
ANSWER---------------Educating employees on fire hazards and prevention
When welding, keep combustible material at least __________ away from
the area. ------CORRECT ANSWER---------------35 feet (10.6 meters)
OSHA requires __________ inspections of fire extinguishers. ------
CORRECT ANSWER---------------Monthly
A safe work place begins by designing in safety by creating a(n)
__________. ------CORRECT ANSWER---------------Standard operating
procedure
OSHA requires elevated work surfaces to have guards if the surface is
__________ above ground. ------CORRECT ANSWER---------------4 feet
(1.2 meters)
