TTT1 written flash cards.
an overhaul ball provides work function and operations? - Correct Answer provides weight allowing the load line to
return to the ground.
can you splice a synthetic sling? - Correct Answer Yes according to the manufacturer
demolition work is a written class _____? - Correct Answer IV
How do you demolish a tower? - Correct Answer Explosive
how long is a firewatch for welding? - Correct Answer 30 min
how many hoisting grips should be installed on a 400 foot tower? - Correct Answer 2
How many slings can you put on a shackle? - Correct Answer 4
if the wire rope load line on a base mounted hoist has a breaking strength of 21,500lbs what is the actual working
load limit when lifting personnel. - Correct Answer 2,150lbs.
If the wire rope load on a base mounted Who is has a breaking strength of 20,500 pounds what is the actual working
load limit? - Correct Answer 4,100
if you have a 19 lines for grounding how many do you need for the site? - Correct Answer 57
microwave dishes are? - Correct Answer directional
parts of the vertical lifeline include the following PFAS? - Correct Answer Anchorage
Cable sleeve
Harness
RET is used for? - Correct Answer Electrical down tilt.
The best synthetic rope material to use for overhead lifting is? - Correct Answer polyester.
The bridals slings on the pole perform work function? - Correct Answer Supports the pole vertically and carries all the
horizontal load.
The cantilever is the distance between the bridal slings and a rooster has sheave. - Correct Answer True.
The two methods of measuring guy wire tensioner are? - Correct Answer Direct and Indirect.
three guys are tied to the same tower like what does the anchors need to meet? - Correct Answer 3000lbs
What are carabiner gates rated at? - Correct Answer 3,600lbs
What is a cantilever used for while rigging? - Correct Answer To lean a ginpole
what is a crown block used for? - Correct Answer to change the direction of a load or jump line coming from the hoist
what is a rooster head? - Correct Answer The block at the top of a gin pole
what is the correct procedure for installing bolts in members of leg splices? - Correct Answer Up and out
What is the force on the harness? - Correct Answer 1,800lbs
what is the tower height lighting for the FAA? - Correct Answer 200ft
an overhaul ball provides work function and operations? - Correct Answer provides weight allowing the load line to
return to the ground.
can you splice a synthetic sling? - Correct Answer Yes according to the manufacturer
demolition work is a written class _____? - Correct Answer IV
How do you demolish a tower? - Correct Answer Explosive
how long is a firewatch for welding? - Correct Answer 30 min
how many hoisting grips should be installed on a 400 foot tower? - Correct Answer 2
How many slings can you put on a shackle? - Correct Answer 4
if the wire rope load line on a base mounted hoist has a breaking strength of 21,500lbs what is the actual working
load limit when lifting personnel. - Correct Answer 2,150lbs.
If the wire rope load on a base mounted Who is has a breaking strength of 20,500 pounds what is the actual working
load limit? - Correct Answer 4,100
if you have a 19 lines for grounding how many do you need for the site? - Correct Answer 57
microwave dishes are? - Correct Answer directional
parts of the vertical lifeline include the following PFAS? - Correct Answer Anchorage
Cable sleeve
Harness
RET is used for? - Correct Answer Electrical down tilt.
The best synthetic rope material to use for overhead lifting is? - Correct Answer polyester.
The bridals slings on the pole perform work function? - Correct Answer Supports the pole vertically and carries all the
horizontal load.
The cantilever is the distance between the bridal slings and a rooster has sheave. - Correct Answer True.
The two methods of measuring guy wire tensioner are? - Correct Answer Direct and Indirect.
three guys are tied to the same tower like what does the anchors need to meet? - Correct Answer 3000lbs
What are carabiner gates rated at? - Correct Answer 3,600lbs
What is a cantilever used for while rigging? - Correct Answer To lean a ginpole
what is a crown block used for? - Correct Answer to change the direction of a load or jump line coming from the hoist
what is a rooster head? - Correct Answer The block at the top of a gin pole
what is the correct procedure for installing bolts in members of leg splices? - Correct Answer Up and out
What is the force on the harness? - Correct Answer 1,800lbs
what is the tower height lighting for the FAA? - Correct Answer 200ft
