• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 4 páginas
Otro

GIS final terms

Document preview thumbnail
Vista previa 1 fuera de 4 páginas

LiDAR - answer-A remote sensing method technology used to create high-resolution and highly accurate DSMs and DTMs of ground elevation with a vertical accuracy of 10 centimeters or better. (Acronym for LIght Detection And Ranging) Z-factor - answer-A conversion factor that adjusts the units of measure for the vertical (or elevation) units when they are different from the horizontal coordinate (x, y) units. If the vertical and horizontal units are different, some terrain analysis tools' results will be incorrect. DSM (Digital Surface Model) - answer-A raster grid that models elevation as a surface and includes the heights of landscape features such as buildings and trees Slope - answer-The incline, or steepness, of a surface measured in degrees from horizontal (0° to 90°), or percent [(rise ÷ run) x 100]. In terrain analysis, it is calculated on a cell-by-cell basis as the steepest incline of a plane defined by each cell and its eight surrounding neighbors. It is the first derivative of an elevation raster. Binary Suitability - answer-An analysis process used to determine how well locations fit a set of criteria. The criteria are evaluated as either suitable or not suitable. For example, in determining possible locations for a new school, locations that have a slope less than 10° on a sandy loam soil might be suitable, while those that don't meet those criteria are not. Aspect - answer-The compass direction (0° to 360°) that a topographic slope faces. The terrain analysis tool calculates it as the steepest downslope direction of a plane defined by a surface raster grid cell and its eight surrounding neighbors. TIN (Triangulated Irregular Network) - answer-A network of contiguous, non-overlapping triangles that can be used to represent geographic surfaces such as elevation or concentrations of minerals or pollutants. Surface Raster - answer-A continuous raster grid where pixel values represent a smoothly varying feature such as terrain or depth to the water table. Examples include grids that represent measured concentration levels such as rainfall or values measured from a fixed point such as sea level. Cut/Fill - answer-A terrain analysis tool that calculates the volume change between two coincident surfaces from different times. It is often used in construction to show excavation progress or to quantify terrain changes following a volcanic eruption, flood, or landslide. DEM (Digital Elevation Model) - answer-A raster grid that models elevation as a surface. Each pixel in the raster grid represents an elevation (digital elevation model). Terrain Analysis - answer-The process of deriving new raster data, such as slope, aspect, viewshed, or curvature, from an elevation raster. The results can be used to model and visualize the earth's surface, perform analysis, and support decision-making. Hillshade - answer-A terrain analysis tool used to visualize topography. It adds shading based on sun angle, elevation, and changes in elevation, providing a clearer picture of the terrain by mimicking the sun's effects (illumination, shading, and shadows) on hills and canyons. DTM (Digital Terrain Model) - answer-A raster grid that models elevation as a bare earth surface that does not include vegetation or human-made features Curvature - answer-The second derivative of an elevation raster. It is used in terrain analysis to quantify ruggedness and how quickly slope changes (for example, rounded hills vs. steep ridges). It is calculated on a cell-by-cell basis, as fitted through each cell and its eight surrounding neighbors. Viewshed - answer-A terrain analysis tool that calculates the raster surface locations visible from defined point(s). The tool has many practical uses, including how to locate guard towers, fire watch towers, or event surveillance. Contour - answer-A terrain analysis tool that calculates lines of equal value (typically lines of equal elevation). Georeference - answer-Add spatial reference to scanned maps, images, and other unreferenced raster data so they can be accurately located and used in a GIS. Rubber Sheeting - answer-Stretching and warping of a nonreferenced raster to fit the control points well. Affine Transformation - answer-A georeferencing transformation that uses a first-order polynomial to shift, scale, and rotate a raster dataset. It is optimized for global accuracy. Root Mean Square Error (RMSE) - answer-A value that describes how consistent a georeferencing transformation is between the different control points. It is computed by squaring all residuals, calculating their average, and then taking the square root. Pixel - answer-A grid cell in a raster dataset. The smaller the cell size, the better the resolution. Transformation - answer-The mathematical process that is applied to each pixel in a raster image to move it from nonreferenced space to referenced space. Local Accuracy - answer-Georeferencing accuracy is high in areas where control points exist and may be low across the rest of the raster that is being georeferenced. Discrete Raster Data - answer-A raster grid where each cell represents part of a feature that has 'definable' boundaries, such as land use categories. CAD - answer-Computer technology used across many different industries to make architectural designs, building plans, floor plans, electrical schematics, mechanical drawings, blueprints, etc. Global Accuracy - answer-Georeferencing accuracy is generalized across the raster that is being georeferenced. Slight errors may exist for individual control points, but the overall georeferenced fit is good for the entire image. Spline Transformation - answer-A georeferencing transformation that optimizes for both global and local accuracy by combining a polynomial transformation with triangulated irregular network (TIN) interpolation. Adjust Transformation - answer-A georeferencing transformation that optimizes for local accuracy at the expense of global accuracy. It is a true rubber sheeting method that is typically applied to images with an oblique view that needs to be flattened. Target Data - answer-Existing spatial data that coincides with the nonreferenced raster data you want to georeference. Raster Data Model - answer-A grid of square or rectangular cells used to represent real-world spatial data. Residual - answer-A measure of the difference between where a control point ended up as compared to its actual, specified location. Raster Resolution - answer-Determined by the size of the pixel in a raster. Finer pixel sizes result in better depiction of surfaces and features. Control Points - answer-Locations that can be accurately identified and matched on both an unreferenced raster dataset and a spatially referenced data set. Continuous Raster Data - answer-A raster grid where pixel values vary smoothly across an area without abrupt or well-defined breaks. Polynomial Transformation - answer-A georeferencing transformation built on control points and a least-squares fitting algorithm. It is optimized for global accuracy. Geographic Coordinate System: - answer-A coordinate system that locates points on the Earth's surface using angular measurements, typically in degrees of latitude and longitude. It provides a framework for referencing locations globally. Projected Co

Vista previa del contenido

GIS FINAL EXAM 2024
LiDAR - answer-A remote sensing method technology used to create high-resolution and highly
accurate DSMs and DTMs of ground elevation with a vertical accuracy of 10 centimeters or better.
(Acronym for LIght Detection And Ranging)

Z-factor - answer-A conversion factor that adjusts the units of measure for the vertical (or elevation)
units when they are different from the horizontal coordinate (x, y) units. If the vertical and
horizontal units are different, some terrain analysis tools' results will be incorrect.

DSM (Digital Surface Model) - answer-A raster grid that models elevation as a surface and includes
the heights of landscape features such as buildings and trees

Slope - answer-The incline, or steepness, of a surface measured in degrees from horizontal (0° to
90°), or percent [(rise ÷ run) x 100]. In terrain analysis, it is calculated on a cell-by-cell basis as the
steepest incline of a plane defined by each cell and its eight surrounding neighbors. It is the first
derivative of an elevation raster.

Binary Suitability - answer-An analysis process used to determine how well locations fit a set of
criteria. The criteria are evaluated as either suitable or not suitable. For example, in determining
possible locations for a new school, locations that have a slope less than 10° on a sandy loam soil
might be suitable, while those that don't meet those criteria are not.

Aspect - answer-The compass direction (0° to 360°) that a topographic slope faces. The terrain
analysis tool calculates it as the steepest downslope direction of a plane defined by a surface raster
grid cell and its eight surrounding neighbors.

TIN (Triangulated Irregular Network) - answer-A network of contiguous, non-overlapping triangles
that can be used to represent geographic surfaces such as elevation or concentrations of minerals
or pollutants.

Surface Raster - answer-A continuous raster grid where pixel values represent a smoothly varying
feature such as terrain or depth to the water table. Examples include grids that represent measured
concentration levels such as rainfall or values measured from a fixed point such as sea level.

Cut/Fill - answer-A terrain analysis tool that calculates the volume change between two coincident
surfaces from different times. It is often used in construction to show excavation progress or to
quantify terrain changes following a volcanic eruption, flood, or landslide.

DEM (Digital Elevation Model) - answer-A raster grid that models elevation as a surface. Each pixel
in the raster grid represents an elevation (digital elevation model).

Terrain Analysis - answer-The process of deriving new raster data, such as slope, aspect, viewshed,
or curvature, from an elevation raster. The results can be used to model and visualize the earth's
surface, perform analysis, and support decision-making.

Hillshade - answer-A terrain analysis tool used to visualize topography. It adds shading based on
sun angle, elevation, and changes in elevation, providing a clearer picture of the terrain by
mimicking the sun's effects (illumination, shading, and shadows) on hills and canyons.

[Type here] [Type here] [Type
here]

Información del documento

Subido en
9 de septiembre de 2024
Número de páginas
4
Escrito en
2024/2025
Tipo
Otro
Personaje
Desconocido
$8.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes