Module 00101-15 Exam Basic Safety -Answered
a good rule about hearing protection is that it should be used if you must raise your
voice for someone to hear you when they are
a. 2 feet
b. 3 feet
c. 5 feet
d. 8 feet - ANSWER-a
A measure of the probability, consequences, and exposure related to an event is
referred to as _______________.
a. safety
b. evaluation
c. risk
d. hazard - ANSWER-c
A personal fall arrest system should be inspected monthly by a(n)________.
a. co-wworker
b. state safety inspector
c. project manager
d. competent person - ANSWER-d
A polarized electrical receptacle is used for ____________.
a. all power tools
b. three- wire power tools
c. double-insulated tools
d. plugs with the ground pin cut off - ANSWER-c
A system that protects workers from hazardous energy while they work with machines
and equipment is referred to as_______.
a. a disconnect
b. a barricade system
c. lockout/tagout
d. an energy-neutral system - ANSWER-c
Benching systems are prohibited in
a. Type A soils
b. Type B soils
c. Type C soils
d. solid rock - ANSWER-c
, Companies with strong safety cultures usually have lower ____________.
a. turnover
b. productivity
c. wages
d. morale - ANSWER-a
Daily inspection of an excavation must be performed by a(n) ________.
a. qualified person
b. competent person
c. foremen
d. engineer - ANSWER-b
Hard hats should be made of fiberglass or
a. metal
b. reinforced plastic
c. styrofoam
d. rubber - ANSWER-b
Hepatitis can be caused by contact with _______.
a. lead
b. asbestos
c. blood
d. chemicals - ANSWER-c
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _____.
a. cover the opening and label the cover.
b. place reflective tape around the opening
c. post a guard at the opening.
d. place a warning sign near the opening - ANSWER-a
In a lockout/tagout situation, a personal lock and tag must be removed by
___________.
a. a supervisor
b. a competent person
c. a qualified person
d. the person who applied them - ANSWER-d
a good rule about hearing protection is that it should be used if you must raise your
voice for someone to hear you when they are
a. 2 feet
b. 3 feet
c. 5 feet
d. 8 feet - ANSWER-a
A measure of the probability, consequences, and exposure related to an event is
referred to as _______________.
a. safety
b. evaluation
c. risk
d. hazard - ANSWER-c
A personal fall arrest system should be inspected monthly by a(n)________.
a. co-wworker
b. state safety inspector
c. project manager
d. competent person - ANSWER-d
A polarized electrical receptacle is used for ____________.
a. all power tools
b. three- wire power tools
c. double-insulated tools
d. plugs with the ground pin cut off - ANSWER-c
A system that protects workers from hazardous energy while they work with machines
and equipment is referred to as_______.
a. a disconnect
b. a barricade system
c. lockout/tagout
d. an energy-neutral system - ANSWER-c
Benching systems are prohibited in
a. Type A soils
b. Type B soils
c. Type C soils
d. solid rock - ANSWER-c
, Companies with strong safety cultures usually have lower ____________.
a. turnover
b. productivity
c. wages
d. morale - ANSWER-a
Daily inspection of an excavation must be performed by a(n) ________.
a. qualified person
b. competent person
c. foremen
d. engineer - ANSWER-b
Hard hats should be made of fiberglass or
a. metal
b. reinforced plastic
c. styrofoam
d. rubber - ANSWER-b
Hepatitis can be caused by contact with _______.
a. lead
b. asbestos
c. blood
d. chemicals - ANSWER-c
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _____.
a. cover the opening and label the cover.
b. place reflective tape around the opening
c. post a guard at the opening.
d. place a warning sign near the opening - ANSWER-a
In a lockout/tagout situation, a personal lock and tag must be removed by
___________.
a. a supervisor
b. a competent person
c. a qualified person
d. the person who applied them - ANSWER-d
