• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 7 páginas
Examen

CMPE 187 Practice Midterm 3

Document preview thumbnail
Vista previa 2 fuera de 7 páginas

An air traffic control system fails once in two years is an example stating: - answer-Failure Intensity Analysis carried to determine the origin of a bug and reasons for the failure is known as: - answer-Root Cause Analysis Apple's new Airport Extreme is made up of components such as WIFI radios (3), power supply, line card and a fan shown on the left which are assembled to create the system shown on the right. These components are tested individually to make sure they function as expected after the system is assembled. This is known as: - answer-Module Testing The average number of defects weighted by their discovered Phage (Phage = distance between phase a defect is injected and phase it is removed) is known as: - answer-System Configuration Continuing from the previous question, you notice that the temperature is displayed using a Celsius scale. You know that local/state/federal regulations require all temperatures to follow the Fahrenheit scale. You can say the system failed: - answer-Verification The cost of defects injected during one phase A of software development and removed during another Phase B is: - answer-Directly Proportional to the Distance AB Diagnostic tests are designed to verify that the hardware components (or, modules) of a system are functioning as desired. These include: - answer-Bit - Error Test Power - On Self Tests Ethernet Loopback Tests The fault count in a system is influenced by: - answer-Operational Environment Size & Complexity Development Process *A Flight Data Recorder (Black Box) is a device of critical importance in all flights. It is used to record flight data which can be used to replay paths and cockpit for conversations. For such a system, it is important to conduct: - answer-Log & Trace Testing The following prerequisites need to be considered for an assessment of whether or not the organization is ready for test automation: - answer-- The system is stable and its functionalities are well defined - The test cases to be automated are unambiguous - The test tools and infrastructure are in place - The test automation professionals have prior successful experience with automation - Adequate budge has been allocated for the procurement of software tools - The system must be stable enough for automation to be meaningful Functionality tests are testing a graphic user interface should include testing for: - answer-Efficient Responsiveness Comprehensibility The function point of a system indicates its - answer-Complexity The function point of a system indicates its - answer-Complexity The function point of a system is weighted statistic comprising of: - answer-- Number of inquiries produced - Number of inputs and outputs - Number of files *GUI's Accessibility - answer-Can users enter, navigate, and exit with relative ease? *GUI's Comprehensibility - answer-Do users understand the product structure with a minimum amount of effort? *GUI's Efficiency means: - answer-Can users do what they want in a minimum number of steps and time? *GUI's Responsiveness - answer-Can uses do what they want and when they want in a way that is clear. Color, Shape, Font, Size Injecting a small number of defects into a software system, during testing, to measure test effectiveness is known as: - answer-Fault Seeding In testing the SpartanMart appl/system with 1000 simultaneous users, as in the previous question, you notice that the response time remains the same as it was when tests with ten simultaneous uses. This could mean that SpartanMart passes: - answer-Scalability Testing In the context of GUI testing, match concepts with their correct meaning - answer-Efficiency -- Minimum Number of Steps Comprehensibility -- GUI is intuitive and understandable Accessibility -- Easy to navigate Responsiveness -- clear, color, shape, font, size In this situation of the previous question, you could have tested AMT with 100 simultaneous users and predicted its scalability to 1000 simultaneous users, using: - answer-Extrapolation It is important to test if a fix for a bug has not introduced new ones, during testing, this is done via - answer-Regression Testing A Mac Book Pro is connected to a router, printer, a sound system and a sketch pad. When you restart the Macbook Pro, you ping each of these components one by one to make sure they are functioning as desired. You are conducting? - answer-Diagnostic Tests Measuring throughput and response time under different conditions is known as - answer-Performance Testing Pareto Principle states that we should concentrate our efforts and resources on the vital few and not the trivial many. This is also known as the: - answer-80-20 Rule Prerequisites for test automation include: - answer-Well defined requirements Unambiguous test cases System Stability The purpose of carrying out a Root Cause or Defect Cause Analysis is to: - answer-Take actions to prevent recurrence of the error. Determine the cause of an error Remove similar defects that may exist A quantitative characteristics of how a system will be used is known as its - answer-Operation Profile *Reliability of a system, such as the AT&T landlines, that run for long time periods, can be treated via? - answer-Random testing Requirements are to be tracked through analysis, design, implementation, and testing using a: - answer-Traceability Matrix A requirement that a system is expected to support but not explicitly stated is known as a: - answer-Inferred Requirement SpartanMart, a bartering system designed and implemented by the CMPE 131 students, is required to handle a minimum of one hundred simultaneous users. You decide to test it with 1000 simultaneous users. This is a form of: - answer-Load Testing Stress tests are designed to discover problems associated with - answer-1) Memory Leaks 2) Buffer Allocations 3) Memory Overflow A sys

Vista previa del contenido

CMPE 187 PRACTICE MIDTERM 3
An air traffic control system fails once in two years is an example stating: - answer-Failure
Intensity

Analysis carried to determine the origin of a bug and reasons for the failure is known as: -
answer-Root Cause Analysis

Apple's new Airport Extreme is made up of components such as WIFI radios (3), power supply,
line card and a fan shown on the left which are assembled to create the system shown on the
right.

These components are tested individually to make sure they function as expected after the system
is assembled.

This is known as: - answer-Module Testing

The average number of defects weighted by their discovered Phage (Phage = distance between
phase a defect is injected and phase it is removed) is known as: - answer-System Configuration

Continuing from the previous question, you notice that the temperature is displayed using a
Celsius scale. You know that local/state/federal regulations require all temperatures to follow the
Fahrenheit scale. You can say the system failed: - answer-Verification

The cost of defects injected during one phase A of software development and removed during
another Phase B is: - answer-Directly Proportional to the Distance AB

Diagnostic tests are designed to verify that the hardware components (or, modules) of a system
are functioning as desired. These include: - answer-Bit - Error Test

Power - On Self Tests

Ethernet Loopback Tests

The fault count in a system is influenced by: - answer-Operational Environment Size

&

Complexity Development Process

*A Flight Data Recorder (Black Box) is a device of critical importance in all flights. It is used to
record flight data which can be used to replay paths and cockpit for conversations. For such a
system, it is important to conduct: - answer-Log & Trace Testing

, The following prerequisites need to be considered for an assessment of whether or not the
organization is ready for test automation: - answer-- The system is stable and its functionalities
are well defined

- The test cases to be automated are unambiguous

- The test tools and infrastructure are in place

- The test automation professionals have prior successful experience with automation

- Adequate budge has been allocated for the procurement of software tools

- The system must be stable enough for automation to be meaningful

Functionality tests are testing a graphic user interface should include testing for: - answer-
Efficient

Responsiveness

Comprehensibility

The function point of a system indicates its - answer-Complexity

The function point of a system indicates its - answer-Complexity

The function point of a system is weighted statistic comprising of: - answer-- Number of
inquiries produced

- Number of inputs and outputs

- Number of files

*GUI's Accessibility - answer-Can users enter, navigate, and exit with relative ease?

*GUI's Comprehensibility - answer-Do users understand the product structure with a minimum
amount of effort?

*GUI's Efficiency means: - answer-Can users do what they want in a minimum number of steps
and time?

*GUI's Responsiveness - answer-Can uses do what they want and when they want in a way that
is clear. Color, Shape, Font, Size

Injecting a small number of defects into a software system, during testing, to measure test
effectiveness is known as: - answer-Fault Seeding

Información del documento

Subido en
5 de septiembre de 2024
Número de páginas
7
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$9.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes