• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 18 páginas
Examen

Exam (elaborations) CMP 305

Document preview thumbnail
Vista previa 3 fuera de 18 páginas

What do surface & subsurface features determine? - What can be built on site - Foundation req What factors are necessary for planning construction techniques? - Surface/subsurface features - Site access - Equip type - Ground water (or if surface water develops) What info needs to be collected for surface evaluation? - Soil maps - Topographic maps - Aerial photos - USGS topographic quadrangle maps - USDA soil conservation maps What features can be observed from bird's eye view of maps? - Land patterns - Sink holes - Drainage patterns (low areas) What things should you check when visiting a site? - Water level - Existing wells - Water marks - Underground utilities - Talk to residents Subsurface evaluation To define vertical & horizontal boundaries of soils/rock under the site - Obtain lab samples @ various depths - Locate ground water table - Aid in equip selection - Safety equip (hazard analysis) 2 Types of soil exploration 1. Direct exploration 2. Semi-direct exploration Devices used in direct soil exploration? - Test pit - Shelby tube - Split barrel - Pocket penetrometer (TSF) - Torvane - Thumb penetration Devices/techniques used in semi-direct soil exploration? - Auger drilling - Rotary drill - Wash-boring - Drilling rock - Cone penetrometer Test pit Direct observation of subsurface material, limited to shallow exploration - Pit or trench: visual inspection (15'-20') - Back hoe: excavator Adv: - view soil profile (type, color) - obtain undisturbed sample Disadv: - limited depth - ground water may limit depth - safety Auger drilling Hand, truck-mounted Types: - solid: dry regions (no ground water), removed for sample, collapse hole - hollow: faster (split barrel, shelby tube), stem acts as casing Disadv: - disturbed sample from the auger Rotary drill Auger w/ clay slurry - slurry moves soil up - slurry stabilizes sides of drill hole Wash-boring Drill/jet water, casing required Adv: - small unit Disadv: - disturbed sample, don't know original location/water content Drilling rock Drill - sample - soft rock: drill - hard rock: diamond (carbide tip) Rock quality designation (RQD): rock sample tested to determine strength Cone penetrometer Pushed into ground - records readings for different section

Vista previa del contenido

CMP 305 Final
Questions and Answers
What do surface & subsurface features determine? - What can be built on site
- Foundation req

What factors are necessary for planning construction techniques? - Surface/subsurface
features
- Site access
- Equip type
- Ground water (or if surface water develops)

What info needs to be collected for surface evaluation? - Soil maps
- Topographic maps
- Aerial photos
- USGS topographic quadrangle maps
- USDA soil conservation maps

What features can be observed from bird's eye view of maps? - Land patterns
- Sink holes
- Drainage patterns (low areas)

What things should you check when visiting a site? - Water level
- Existing wells
- Water marks
- Underground utilities
- Talk to residents

Subsurface evaluation To define vertical & horizontal boundaries of soils/rock under the
site
- Obtain lab samples @ various depths
- Locate ground water table
- Aid in equip selection
- Safety equip (hazard analysis)

2 Types of soil exploration 1. Direct exploration
2. Semi-direct exploration

Devices used in direct soil exploration? - Test pit
- Shelby tube
- Split barrel
- Pocket penetrometer (TSF)

,- Torvane
- Thumb penetration

Devices/techniques used in semi-direct soil exploration? - Auger drilling
- Rotary drill
- Wash-boring
- Drilling rock
- Cone penetrometer

Test pit Direct observation of subsurface material, limited to shallow exploration
- Pit or trench: visual inspection (15'-20')
- Back hoe: excavator
Adv:
- view soil profile (type, color)
- obtain undisturbed sample
Disadv:
- limited depth
- ground water may limit depth
- safety

Auger drilling Hand, truck-mounted
Types:
- solid: dry regions (no ground water), removed for sample, collapse hole
- hollow: faster (split barrel, shelby tube), stem acts as casing
Disadv:
- disturbed sample from the auger

Rotary drill Auger w/ clay slurry
- slurry moves soil up
- slurry stabilizes sides of drill hole

Wash-boring Drill/jet water, casing required
Adv:
- small unit
Disadv:
- disturbed sample, don't know original location/water content

Drilling rock Drill - sample
- soft rock: drill
- hard rock: diamond (carbide tip)
Rock quality designation (RQD): rock sample tested to determine strength

Cone penetrometer Pushed into ground
- records readings for different sections
Adv:

, - provides continuous record of test results
- provides eng. prop. for entire soil profile
Disadv:
- no sample

Geophysical tests & two types *usually w/ road work
- fast results, but more subjective
- less expensive
- borings: still required to determine soil prop.
Types:
- seismic refraction
- electrical resistivity

Seismic refraction Velocities of seismic wave transmitted thru soil
- increasing density = faster wave speed
- sensors pick up waves from explosion
- disadv: boundaries poorly defined

Electrical resistivity Measures electrical resistance thru soil
- varies w/ different soil types
- effected by water content & ion concentration

Which soils have low and high resistance? - Clay soils have ions: low resistance
- Coarse materials (sand/gravel/rock): high resistance

Types of soil sampling - Disturbed sample
- Undisturbed sample

Disturbed sample Used for grain size analysis (LL, PL, PI)
- drilled sample

Undisturbed sample - split barrel (SPT)
- shelby tube
- test pit

Split barrel (standard penetration test - SPT) Tube used to collect sample at bottom of test
hole
- pass thru hollow tube auger
- sample may be compressed, suitable for soil classification
- measurement of resistance to penetration
- SPT valves

SPT values Sampler driven for 3 consecutive 6" increments
- # of blows per 6" increment
- blow count summation (total 2 last sets of #s)

Información del documento

Subido en
4 de septiembre de 2024
Número de páginas
18
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$8.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Vendido
1
Seguidores
0
Artículos
1124
Última venta
-



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes