EXAM: Range Laser Safety|20 Questions with
Correct Answers
Which of the following is not a responsibility of an LRSO as part of conducting a range laser
safety inspection? Correct Answer-Check range conditions to ensure the are acceptable for
the laser operation
Which of the following is not a duty of an LRSO? Correct Answer-Certify ranges for range
laser operations
What class of laser system is capable of producing a skin hazard? Correct Answer-Class 4
You are supervising a range laser operation and enforcing the use of LEP (Laser Eye
Protection). Which is the following LEP should be used with the laser system. Correct
Answer-OD 7 @ 710-1200nm
As an LRSO, you will ensure a clear line of sight exists between the laser system and the target
prior to starting a laser operation. What type of control measure does this represent?
Correct Answer-Engineering Control
, EXAM: Range Laser Safety|20 Questions with
Correct Answers
You are supervising a laser operation involving Class 4 laser systems. You brief personnel to
roll their sleeves down because these lasers present a skin hazard. Which type of control
measure does this represent? Correct Answer-Administrative control
You are supervising a range laser operation involving laser-guided weapons. The munition
detonations are cause smoke and dust to partially obscure the targets. As LRSO, what action
should you take? Correct Answer-Hold training until the smoke and dust clear.
Lasers are used for variety of military applications. What time of laser application uses a laser
primarily as a warning device? Correct Answer-Ocular interruption
You are serving as LRSO for a range laser operation. Due to the operating principles of lasers,
you have certain duties pertaining to the LSDZ. Which of the following actions must you
ensure? Correct Answer-LEP is worn inside the LSDZ
You are supervising a laser operation and observe reflection of the laser beyond the targets.
You call a Cease Fire. What could be the cause of the reflection? Correct Answer-Targets
may be smaller than laser spot size and overspill is occurring.
Correct Answers
Which of the following is not a responsibility of an LRSO as part of conducting a range laser
safety inspection? Correct Answer-Check range conditions to ensure the are acceptable for
the laser operation
Which of the following is not a duty of an LRSO? Correct Answer-Certify ranges for range
laser operations
What class of laser system is capable of producing a skin hazard? Correct Answer-Class 4
You are supervising a range laser operation and enforcing the use of LEP (Laser Eye
Protection). Which is the following LEP should be used with the laser system. Correct
Answer-OD 7 @ 710-1200nm
As an LRSO, you will ensure a clear line of sight exists between the laser system and the target
prior to starting a laser operation. What type of control measure does this represent?
Correct Answer-Engineering Control
, EXAM: Range Laser Safety|20 Questions with
Correct Answers
You are supervising a laser operation involving Class 4 laser systems. You brief personnel to
roll their sleeves down because these lasers present a skin hazard. Which type of control
measure does this represent? Correct Answer-Administrative control
You are supervising a range laser operation involving laser-guided weapons. The munition
detonations are cause smoke and dust to partially obscure the targets. As LRSO, what action
should you take? Correct Answer-Hold training until the smoke and dust clear.
Lasers are used for variety of military applications. What time of laser application uses a laser
primarily as a warning device? Correct Answer-Ocular interruption
You are serving as LRSO for a range laser operation. Due to the operating principles of lasers,
you have certain duties pertaining to the LSDZ. Which of the following actions must you
ensure? Correct Answer-LEP is worn inside the LSDZ
You are supervising a laser operation and observe reflection of the laser beyond the targets.
You call a Cease Fire. What could be the cause of the reflection? Correct Answer-Targets
may be smaller than laser spot size and overspill is occurring.
