• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 9 páginas
Examen

CWNP Final Study Guide

Document preview thumbnail
Vista previa 2 fuera de 9 páginas

The Institute of Electrical and Electronics Engineers (IEEE) is an engineering association dedicated to fostering technological innovation and excellence for the benefit of humanity. They develop standards, in relation to Wi-Fi, for networking communications and operations. The 802 standards committee focuses on developing and maintaining networking standards and recommended practices for local, metro, and other network types. Within the unlicensed spectrum bounds defined by the FCC in North America, the IEEE creates the 802.11 standard. For Example, 802.11 channels as defined in the standard must fall within the FCC unlicensed ranges. Over the years new technology has been introduced to improve the speed and reliability of WLANs so the 802.11 standard has been amended to include additional features. - answer-What organization creates and manages the 802.11 standard? The Wi-Fi Alliance further defines standards within the bounds set by the 802.11 standard. The Wi-Fi Alliance promotes interoperability between the vendors of WLAN equipment. The Wi-Fi Alliance is an important organization for wireless LAN (WLAN) progress. In fact, the Wi-Fi Alliance owns the "Wi-Fi" trademark. The Wi-Fi Alliance often takes the most important aspects of the 802.11 specifications and tests those features and functions for multi-vendor functionality. Devices are provided by product vendors to be tested, and if the products pass the interoperability tests, they become Wi-Fi certified for a specific technology. - answer-The Wi-Fi Alliance certifies equipment to be compliant with IEEE standards and compatible with other Wi-Fi equipment. IETF standards are defined with several details including: -RFC number: you can search for this number in any search engine as "RFC ###" and quickly located and read the document. All IETF RFCs are freely available online. -Updated by: these are RFCs that make changes or additions to the current -RFC. -Obsoletes: this is the old version of the currently viewed RFC. When looking at an old version of an RFC, you will see "Obsoleted by: ####" so that you know a newer version is available. -Contributors: the people or companies who helped to develop the standard. -Name: the name of the standard is given in the opening title. For example, the old version (RFC 2284) was named "PPP Extensible Authentication Protocol (EAP)" but the new version (RFC 3748) is simply named "Extensible Authentication Protocol (EAP)." - answer-IETF standards are defined through a document called an RFC and each one has a number. Regulatory domains define which channels are available and other factors such as output power settings, but they do not define the PHYs. The correct answer is 'False'. - answer-Regulatory domains define the 802.11 standard PHYs for each domain. In addition to the terms standard, draft, amendment and standard as amended, it is important to know that the letters used can have significance. For example, 802.1X is an important standard related to modern WLAN security. It provides the port-based authentication we used in our enterprise WLANs. However, it is often mistakenly called 802.1x, when it should be 802.1X. What is the difference? -A lowercase letter indicates an amendment to a standard. -An uppercase letter indicates a standard in and of itself. -802.1X is not an amendment to some earlier port-based authentication standard, but it is a standard for port-based authentication. In the end, an x is not an X. - answer-What does a capital letter, such as the D in 802.1D, indicate about an IEEE document? The amplitude defines the strength of the signal. A higher amplitude is a stronger signal. A lower amplitude is a weaker signal. Therefore, an amplitude of 3 dB is stronger than 1 dB. - answer-What characteristic of an RF wave defines its strength or power? Higher frequencies have shorter wavelengths and lower frequencies have longer wavelengths. - answer-Which one of the following frequencies has the longest wavelength? The speed of light, which is the speed at which electromagnetic waves travel, is the constant in the relationship between frequency and wavelength. - answer-What is the constant that results in the interrelationship between frequency and wavelength? Phase is a relational or comparative radio concept. Phase is a comparison of the cycle or period of different waves. A single wave does not have a phase. However, two waves will have a phase relationship with one another. This is true for reflected copies of the same wave, which can have different phase relationships. An example of phase would be if there are two roads that intersect. The roads can be parallel, perpendicular or at any angle to one another but you can not have an angle between just one road. This is similar to phase. - answer-Phase is a relational radio concept in that it compares two waves to each other as either in phase or out of phase. Attenuation occurs in free space and as signals travel through materials such as walls and doors. The attenuation is the weakening of the signal as it travels farther away from the point of origination. - answer-We say that an RF signal attenuates as it travels through free space. Additionally, materials such as walls can attenuate the signal more than free space itself. Milliwatt (mW) is often used at the transmitter to indicate output power. dBm is also used at this point. - answer-What RF metric is often used at the output radio to indicate the output power level? 0 dBm is actually equal to 1 mW. - answer-0 dBm is equal to 1 Watt. mW is an absolute metric as is dBm. However dB is relative as is dBi and dBd. - answer-The metric mW is absolute and the metric dB is relative. The signal-to-noise ratio (SNR) is the difference between the signal and the noise floor. With a noise floor of -95, for example, and a signal of -72, the SNR is 23 dB. - answer-What is defined as the difference between the signal strength and the noise floor? The Equivalent Isotropically Radiated Power (EIRP) is the theoretical power that is delivered by an intentional radiator to an imaginary isotropic antenna that would produce an even distribution of RF power with the same amplitude actually experienced in the preferred direction of the actual antenna. How's that for a technical definition. To make it simpler, it's the output power from the intentional radiator (output power from the transmitter plus any gains or losses leading up to the connection point of the antenna) plus the directional gain provided by the antenna. - answer-What is defined as the output power from the radiating antenna including the gain of the antenna? Antennas produce passive gain. They do not add any new RF energy. They simply focus the energy producing passive gain. - answer-What kind of gain is produced by an antenna? While omnidirectional antennas may have a somewhat narrow vertical beamwidth, they have a full 360 degree horizontal beamwidth and, therefore, the question is false. - answer-Omnidirectional antennas are mostly used in bridge links because of their narrow vertical and horizontal beamwidths. The elevation chart shows the vertical pattern and the azimuth chart shows the horizontal pattern. - answer-What antenna chart shows the vertical radiation pattern of an antenna? Grid antennas are very similar to dish antennas, except they have a back panel with holes of varying types that allow the wind to pass through. This helps to prevent wind loading, which can cause a dish antenna to go out of alignment for very sensitive links. - answer-A grid antenna is useful for building bridge links and addressing wind loading issues. Lightning arrestors do not protect from direct lightning strikes, but they do protect from incidental or ambient energy from nearby lightning strikes. - answer-What is used to protect APs and bridges from incidental energy from a nearby lightning strike? In most cases, channels 1, 6, and 11 are used and alternated as they are non-overlapping and available worldwide. - answer-What three channels are best for use in most 2.4 GHz WLAN implementations? 25 20 MHz channels are available after the release of 802.11ac. Before that it was 24. - answer-How many total 20 MHz channels are available in the 5 GHz bands, if they are supported by the regulatory domain? 802.11ac or VHT was made available only in the 5 GHz bands. Some chipsets do implement the VHT-introduced 256-QAM in 2.4 GHz, but this is not part of the 802.11 standard. - answer-The VHT PHY (802.11ac) is only available in the 5 GHz frequency bands. Dynamic Frequency Selection (DFS) is used to detect radar events (or events that look like radar events) and move the AP channel away from those frequencies. - answer-What is used to ensure that an AP does not operate on a channel that interferes with radar? A wireless bridge is used to connect two or more networks and not to connect clients. - answer-A wireless bridge is created when three or more clients connect to an AP. External antenna APs are most likely to be used in outdoor deployments today. Standard offices, SOHO, and even hospitality is more likely to use APs with internal antennas in new deployments. - answer-Where is an AP with external antennas MOST likely to be used today in new deployments? Autonomous APs are self-contained. They do not require a controller or cloud to operate. - answer-An autonomous AP is one that depends on a controller for functionality. A midspan injector is placed between the switch and the powered device (PD). An endpoint injector is a power source equipment (PSE) type wherein the power is provided by the switch. - answer-What kind of PoE injector works using a power injector placed between the switch and the powered device? 802.3at introduced higher power levels (30 W transmitted and up to 25.5 W received). 802.3af supported only 15.4 W transmitted and 12.95 W received. Many newer dual-band APs require 802.3at. - answer-Many 802.11ac dual-band APs require 802.3at PoE for full functionality. IWCONFIG is the Linux command. NETSH is used in Windows. Airport is used in macOS. IPCONFIG is a Windows IP configuration command. - answer-What command line (or shell) utility is frequently available in Linux distributions for WLAN configuration? The frame is created at the MAC sublayer. - answer-What is created at the MAC sublayer in order to deliver higher layer data to other devices on the network? The beacon frame is transmitted approximately 10 times per second (a little less by default) and it announces the BSS and its capabilities. - answer-What kind of frame is transmitted regularly from an AP to announce the BSS and the capabilities of that BSS? The early preamble or training field as well as PLCP header information can be used to provide backwards compatibility. - answer-The 802.11 HT and VHT PHYs use special Physical Layer preambles/training fields to accomplish backwards compatibility with older PHYs operating in the same bands. The ACK respond is not required for some 802.11 frame types, for example, Beacon frames do not require an ACK. - answer-The ACK frame is always transmitted back to the transmitting STA to acknowledge frame receipt for all 802.11 frame types. The 4-way handshake is used to provide materials to the client (supplicant) and AP (authenticator) that can be used to create and install unicast encryption keys and it is used to transmit the group encryption key for the BSS. - answer-What is the purpose of the 4-way handshake in 802.11 networks? CSMA/CD is part of Ethernet. CSMA/CA is used in 802.11 WLANs in an attempt to avoid collisions. - answer-CSMA/CD is used in 802.11 WLANs to ensure that collisions are handled appropriately The Network Allocation Vector (NAV) is set based on the Duration field value for STAs that can demodulate and decode the frame in the channel. - answer-What timer, which is part of the DCF algorithm, is set based on the Duration field value in a demodulated and decoded frame? Carrier Sense (CS) detects 802.11 frames. Energy Detect (ED) detects any energy in the channel above a defined threshold. - answer-What carrier sensing method is used to detect non-Wi-Fi transmissions in the channel? The management plan includes configuration and monitoring. - answer-In what plane of operations is configuration and monitoring when considering network planes? Centralized data forwarding requires that all data pass through the WLAN controller. - answer-When centralized data forwarding is used in a WLAN, all data must pass through what device? N=1 indicates that the required number of primary controllers are installed as well as a single secondary or backup controller. - answer-N+1 is a WLAN controller-based availability solution where an extra AP is added to each coverage area. The controller usually performs 802.11 authentication, association and reassociation. It also typically acts as the authenticator in an 802.1X/EAP implementation. - answer-When a split-mac, controller-based architecture is used, which function is usually performed in the controller? In some cases, removing APs is the proper solution. When too many APs (more than required) are in a coverage area, it can result in increased CCI and reduce overall throughput. - answer-Adding more APs is the best solution to all scenarios whe

Vista previa del contenido

CWNP Final Study Guide
The Institute of Electrical and Electronics Engineers (IEEE) is an engineering
association dedicated to fostering technological innovation and excellence
for the benefit of humanity. They develop standards, in relation to Wi-Fi, for
networking communications and operations. The 802 standards committee
focuses on developing and maintaining networking standards and
recommended practices for local, metro, and other network types. Within the
unlicensed spectrum bounds defined by the FCC in North America, the IEEE
creates the 802.11 standard. For Example, 802.11 channels as defined in the
standard must fall within the FCC unlicensed ranges. Over the years new
technology has been introduced to improve the speed and reliability of
WLANs so the 802.11 standard has been amended to include additional
features. - answer-What organization creates and manages the 802.11
standard?

The Wi-Fi Alliance further defines standards within the bounds set by the
802.11 standard. The Wi-Fi Alliance promotes interoperability between the
vendors of WLAN equipment. The Wi-Fi Alliance is an important organization
for wireless LAN (WLAN) progress. In fact, the Wi-Fi Alliance owns the "Wi-Fi"
trademark. The Wi-Fi Alliance often takes the most important aspects of the
802.11 specifications and tests those features and functions for multi-vendor
functionality. Devices are provided by product vendors to be tested, and if
the products pass the interoperability tests, they become Wi-Fi certified for a
specific technology. - answer-The Wi-Fi Alliance certifies equipment to be
compliant with IEEE standards and compatible with other Wi-Fi equipment.

IETF standards are defined with several details including:

-RFC number: you can search for this number in any search engine as "RFC
###" and quickly located and read the document. All IETF RFCs are freely
available online.
-Updated by: these are RFCs that make changes or additions to the current -
RFC.
-Obsoletes: this is the old version of the currently viewed RFC. When looking
at an old version of an RFC, you will see "Obsoleted by: ####" so that you
know a newer version is available.
-Contributors: the people or companies who helped to develop the standard.
-Name: the name of the standard is given in the opening title. For example,
the old version (RFC 2284) was named "PPP Extensible Authentication
Protocol (EAP)" but the new version (RFC 3748) is simply named "Extensible
Authentication Protocol (EAP)." - answer-IETF standards are defined through
a document called an RFC and each one has a number.

, Regulatory domains define which channels are available and other factors
such as output power settings, but they do not define the PHYs.
The correct answer is 'False'. - answer-Regulatory domains define the 802.11
standard PHYs for each domain.

In addition to the terms standard, draft, amendment and standard as
amended, it is important to know that the letters used can have significance.
For example, 802.1X is an important standard related to modern WLAN
security. It provides the port-based authentication we used in our enterprise
WLANs. However, it is often mistakenly called 802.1x, when it should be
802.1X. What is the difference?

-A lowercase letter indicates an amendment to a standard.
-An uppercase letter indicates a standard in and of itself.
-802.1X is not an amendment to some earlier port-based authentication
standard, but it is a standard for port-based authentication.

In the end, an x is not an X. - answer-What does a capital letter, such as the
D in 802.1D, indicate about an IEEE document?

The amplitude defines the strength of the signal. A higher amplitude is a
stronger signal. A lower amplitude is a weaker signal. Therefore, an
amplitude of 3 dB is stronger than 1 dB. - answer-What characteristic of an
RF wave defines its strength or power?

Higher frequencies have shorter wavelengths and lower frequencies have
longer wavelengths. - answer-Which one of the following frequencies has the
longest wavelength?

The speed of light, which is the speed at which electromagnetic waves
travel, is the constant in the relationship between frequency and
wavelength. - answer-What is the constant that results in the
interrelationship between frequency and wavelength?

Phase is a relational or comparative radio concept. Phase is a comparison of
the cycle or period of different waves. A single wave does not have a phase.
However, two waves will have a phase relationship with one another. This is
true for reflected copies of the same wave, which can have different phase
relationships. An example of phase would be if there are two roads that
intersect. The roads can be parallel, perpendicular or at any angle to one
another but you can not have an angle between just one road. This is similar
to phase. - answer-Phase is a relational radio concept in that it compares two
waves to each other as either in phase or out of phase.

Attenuation occurs in free space and as signals travel through materials such
as walls and doors. The attenuation is the weakening of the signal as it

Información del documento

Subido en
26 de agosto de 2024
Número de páginas
9
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$11.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes