• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 24 páginas
Examen

cwnp 802.11

Document preview thumbnail
Vista previa 3 fuera de 24 páginas

4-way Handshake - answer-A protocol that uses a frame exchange between two stations (STAs) to create dynamic encryption keys that are unique to any two radios. Either preshared key (PSK) or 802.1X authentication creates a Pairwise Master Key (PMK) that seeds the 4-Way Handshake process. The four frame exchange completes the authentication process once the final encryption keys are created. 40 mhz intolerant - answer-a bit potentially set in the 802.11 frame allowing STAs to indicate that 40 MHz channels should not be used in their BSS or in surrounding networks. The bit is processed only in the 2.4 GHz band. 802.11 - answer-A standard maintained by the IEEE for implementing and communicating with wireless local area networks (WLANs). Regularly amended, the standard continues to evolve to meet new demands. Several Physical Layer (PHY) methods are specified and the Medium Access Control (MAC) sublayer is also specified. 802.11 state machine - answer-The 802.11 state machine defines the condition of the connection of a client STA to another STA and can be in one of the three states Unauthenticated/Unassociated, Authenticated/Unassociated, or Authenticated/Associated. 802.11a - answer-An 802.11 standard that operates in the 5 GHz frequency band and, by using OFDM, supports speeds up to 54 Mbps. 802.11aa - answer-an 802.11 amendment that added support for robust audio and video streaming through MAC enhancements. it specifies a new category of station called a Stream Classification Service (SCS) station. The SCS implementation is optional for a WMM QoS station. 802.11ac - answer-An 802.11 amendment that operates in the 5GHz band. It uses MU-MIMO, beamforming, and 256 QAM technology, up to 8 spatial streams and OFDM modulation. Support is included for data rates up to 6933.3 Mbps 802.11 ae - answer-An 802.11 amendment that provides prioritization of management frames. It defines a new Quality of Service Management Frame (QMF). When the (QMF) service is used some management frames may be transmitted using an access category other than the one used for voice (AC_VO). When communicating with stations that do not support the QMF service, the station uses access category AC_VO to transmit management frames. when QMF is supported, the beacon frame includes a Qmf Policy element. 802.11 ah - answer-An 802.11 draft tat specifies operations in the sub-1 Ghz range. Frequencies used vary by regulatory domain. the draft supports 1,2,4,8 and 16 MHz channels with OFDM modulation. - answer-AN 802.11 draft that will support bi-directional MU-MIMO, higher modulation rates and subchannelization. it is too early to know the final details of this amendment at the time of writing; However it is planned to operate in the 2.4 GHz and 5 Ghz band. 802.11b - answer-an IEEE 802.11 amendment that operates in the 2.4GHz ism band. It uses HR/DSSS and earlier technology. It can support data rates of up to 11 Mbps 802.11e - answer-An 802.11 amendment, now incorporated into the most recent roll-up, that provided quality of service extensions to the wireless link through probabilistic prioritization based on the contention window. The Wi-Fi Multimedia (WMM) certification is based on this amendment. 802.11g - answer-An 802.11 amendment that operates in the 2.4 GHz frequency band at speeds up to 54 Mbps by using ERP-OFDM. 802.11i - answer-An 802.11 amendment, now incorperated into the most recent roll-up, which provided security enhancements to the standard and resolved weaknesses in the original WEP encryption solution. and encryption algorithms. 802.11k - answer-An IEEE 802.11 amendment that specifies and defines WLAN characteristics and mechanisms. 802.11n - answer-An IEEE 802.11 amendment that operates in the 2.4 ISM and 5 GHZ UNII/ISM bands. It uses MIMO, HT-OFDM and earlier technology. It can support data rates of up to 600Mbps. 802.11r - answer-An IEEE 802.11 amendment that enables roaming between access points. 802.11u - answer-An IEEE 802.11 amendment that adds features for mobile communication devices such as phones and tablets. 802.11w - answer-An IEEE 802.11 amendment to increase security for the management frames. 802.11y - answer-an IEEE amendment that allows registered stations to operate at a higher power outpt in the Mhz band. 802.1x - answer-802.1X is an IEEE standard that uses the Extensible Authentication Protocol (EAP) framework to authenticate devices attempting to connect to the LAN or WLAN. The process involves the use of a supplicant to be authenticated, authenticator, and authentication server 802.3 - answer-A set of standards maintained by the IEEE for implementing and communicating with wired Ethernet networks and including Power over Ethernet (PoE) specifications. AAA Framework - answer-Authentication, Authorization, and Accounting is a framework for monitoring usage, enforcing policies, controlling access to computer resources, and providing the correct billing amount for services AAA Server Credential - answer-The AAA server credential is the validation materials used for the server. When mutual authentication is required, a server certificate is typically used as the AAA server credential. Absorption - answer-Occurs when an obstacle absorbs some or all of a radio waveʹs energy. Access Category (AC) - answer-An access category is a priority class. 802.11 specifies four different priority classes - voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK). Access Control List (ACL) - answer-ACLs are lists that inform a STA or user what permissions are available to access files and other resources. ACLs are also used in routers and switches to control packets allowed through to other networks Access Layer Forwarding - answer-Data forwarding that occurs at the access layer, also called distributed data forwarding. The data is distributed from the access layer directly to the destination without passing through a centralized controller. Access Point - answer-An access point (AP) is a device containing a radio that is used to create an access network, bridge network or mesh network. The AP contains the Distribution System Service. Access Port - answer-An AP used for mesh networks and that connects to the wired or wireless network at the edge of the mesh. Acknowledgement Frame - answer-A frame sent by the receiving 802.11 station confirming the received data Active Mode - answer-A power‐save mode in which the station never turns the radio off. Active Scanning - answer-A scanning (network location) method in which the client broadcasts probe requests and records the probe responses in order to determine the network with which it will establish an association. Active Survey - answer-A wireless survey conducted on location that involves measuring throughput rates, round trip time, and packet loss by connecting devices to an AP and transmitting data during the survey. Ad‐Hoc Mode - answer-The colloquial name for an Independent Basic Service Set (IBSS). STAs connect directly with each other, and an AP is not used. Adjacent Channel Interference (ACI) - answer-ACI occurs when channels near each other (in the frequency domain) interfere with one another due to either partial frequency overlap on primary carrier frequencies or excessive output power. Adjacent Overlapping Channels - answer-Adjacent overlapping channels are channels whose bands interfere with their neighboring channels on the primary carrier frequencies. Non‐overlapping channels are channels whose bands do not interfere with neighboring channels on the primary carrier frequencies. AES (Advanced Encryption Standard) - answer-The encryption cipher used with CCMP and WPA2 providing improved security over WEP/RC4 or TKIP/RC4. Aggregated MAC Protocol Data Units (A‐MPDU) - answer-A‐MPDU transmissions are created by transmitting multiple MPDUs as one PHY frame as opposed to A‐ MSDU transmissions, which are created by passing multiple MSDUs down to the PHY layer as a single MPDU. Aggregated MAC Service Data Unit (A‐MSDU) - answer-See Aggregated MAC Protocol Data Unit. AirTime Fairness - answer-Transmits more frames to client STAs with higher data rates than those with lower data rates so that the STAs get fair access to the air (medium) instead of having to wait for slower data rate STAs. Amplification - answer-The process of increasing a signal's power level. Amplifier - answer-A device intended to increase the power level of a signal. Amplitude - answer-The power level of a signal. Announcement Traffic Indication Message (ATIM) - answer-A traffic indication map (sent in a management frame) in an Ad‐Hoc (IBSS) network to notify other clients of pending data transfers for power saving purposes Antenna - answer-A device that converts electric power into radio waves and radio waves into electric power. Association - answer-The condition wherein a client STA is linked with an AP for frame transmission through the AP to the network Association ID (AID) - answer-Association ID (AID) is an identification assigned by a wireless STA (AP) to another STA (client) in order to transmit the correct data to that device in an Infrastructure Basic Service Set. Attenuation - answer-The loss of signal strength as an RF wave passes through a medium. Attenuator - answer-A device that intentionally reduces the strength of an RF signal. Authentication - answer-The process of the user or device identity validation. Authentication and Key Management (AKM) - answer-The protocols used to authenticate a client STA on a WLAN and generate an encryption key for use in frame encryption. Authentication Server - answer-The authentication server validates the client before allowing access to the network. In an 802.1X/EAP implementation for WLANs, the authentication server is often a RADIUS server. Authenticator - answer-The device that provides access to authentication services in order to allow connected devices to access network resources. In an 802.1X/EAP implementation for WLANs, the authenticator is typically the AP or controller. Automatic Power Save Delivery (APSD) - answer-APSD is a power saving method which uses both scheduled (S‐APSD) and unscheduled (U‐APSD) frame delivery methods. S‐APSD sends frames to a power save STA from the AP at a planned time. U‐APSD sends frames to a power save STA from the AP when the STA sends a frame to the AP. The frame from the STA is considered a trigger frame. Autonomous AP - answer-An AP that can perform security functions, RF management, and configuration without the need for a centralized WLAN controller or any other control platform. Azimuth Chart - answer-A chart showing the radiation pattern of an antenna as viewed from the top of the antenna. Also called an H‐Plane Chart or H‐Chart. Backoff Timer - answer-The timer used during CSMA/CA to wait for access to the medium, which is selected from the contention window. Band Steering - answer-A method used by vendors to encourage STAs to connect to the 5 GHz band inste

Vista previa del contenido

CWNP 802.11

4-way Handshake - answer-A protocol that uses a frame exchange between two stations (STAs)
to create dynamic encryption keys that are unique to any two radios. Either preshared key
(PSK) or 802.1X authentication creates a Pairwise Master Key (PMK) that seeds the 4-Way
Handshake process. The four frame exchange completes the authentication process once the
final encryption keys are created.

40 mhz intolerant - answer-a bit potentially set in the 802.11 frame allowing STAs to indicate
that 40 MHz channels should not be used in their BSS or in surrounding networks. The bit is
processed only in the 2.4 GHz band.

802.11 - answer-A standard maintained by the IEEE for implementing and communicating with
wireless local area networks (WLANs). Regularly amended, the standard continues to evolve to
meet new demands. Several Physical Layer (PHY) methods are specified and the Medium
Access Control (MAC) sublayer is also specified.

802.11 state machine - answer-The 802.11 state machine defines the condition of the
connection of a client STA to another STA and can be in one of the three states
Unauthenticated/Unassociated, Authenticated/Unassociated, or Authenticated/Associated.

802.11a - answer-An 802.11 standard that operates in the 5 GHz frequency band and, by using
OFDM, supports speeds up to 54 Mbps.

802.11aa - answer-an 802.11 amendment that added support for robust audio and video
streaming through MAC enhancements. it specifies a new category of station called a Stream
Classification Service (SCS) station. The SCS implementation is optional for a WMM QoS station.

802.11ac - answer-An 802.11 amendment that operates in the 5GHz band. It uses MU-MIMO,
beamforming, and 256 QAM technology, up to 8 spatial streams and OFDM modulation.
Support is included for data rates up to 6933.3 Mbps

802.11 ae - answer-An 802.11 amendment that provides prioritization of management frames.
It defines a new Quality of Service Management Frame (QMF). When the (QMF) service is used
some management frames may be transmitted using an access category other than the one
used for voice (AC_VO). When communicating with stations that do not support the QMF
service, the station uses access category AC_VO to transmit management frames. when QMF is
supported, the beacon frame includes a Qmf Policy element.

802.11 ah - answer-An 802.11 draft tat specifies operations in the sub-1 Ghz range. Frequencies
used vary by regulatory domain. the draft supports 1,2,4,8 and 16 MHz channels with OFDM
modulation.

,802.ax - answer-AN 802.11 draft that will support bi-directional MU-MIMO, higher modulation
rates and subchannelization. it is too early to know the final details of this amendment at the
time of writing; However it is planned to operate in the 2.4 GHz and 5 Ghz band.

802.11b - answer-an IEEE 802.11 amendment that operates in the 2.4GHz ism band. It uses
HR/DSSS and earlier technology. It can support data rates of up to 11 Mbps

802.11e - answer-An 802.11 amendment, now incorporated into the most recent roll-up, that
provided quality of service extensions to the wireless link through probabilistic prioritization
based on the contention window. The Wi-Fi Multimedia (WMM) certification is based on this
amendment.

802.11g - answer-An 802.11 amendment that operates in the 2.4 GHz frequency band at speeds
up to 54 Mbps by using ERP-OFDM.

802.11i - answer-An 802.11 amendment, now incorperated into the most recent roll-up, which
provided security enhancements to the standard and resolved weaknesses in the original WEP
encryption solution. and encryption algorithms.

802.11k - answer-An IEEE 802.11 amendment that specifies and defines WLAN characteristics
and mechanisms.

802.11n - answer-An IEEE 802.11 amendment that operates in the 2.4 ISM and 5 GHZ UNII/ISM
bands. It uses MIMO, HT-OFDM and earlier technology. It can support data rates of up to
600Mbps.

802.11r - answer-An IEEE 802.11 amendment that enables roaming between access points.

802.11u - answer-An IEEE 802.11 amendment that adds features for mobile communication
devices such as phones and tablets.

802.11w - answer-An IEEE 802.11 amendment to increase security for the management frames.

802.11y - answer-an IEEE amendment that allows registered stations to operate at a higher
power outpt in the 3650- 3700 Mhz band.

802.1x - answer-802.1X is an IEEE standard that uses the Extensible Authentication Protocol
(EAP) framework to authenticate devices attempting to connect to the LAN or WLAN. The
process involves the use of a supplicant to be authenticated, authenticator, and authentication
server

802.3 - answer-A set of standards maintained by the IEEE for implementing and communicating
with wired Ethernet networks and including Power over Ethernet (PoE) specifications.

, AAA Framework - answer-Authentication, Authorization, and Accounting is a framework for
monitoring usage, enforcing policies, controlling access to computer resources, and providing
the correct billing amount for services

AAA Server Credential - answer-The AAA server credential is the validation materials used for
the server. When mutual authentication is required, a server certificate is typically used as the
AAA server credential.

Absorption - answer-Occurs when an obstacle absorbs some or all of a radio waveʹs energy.

Access Category (AC) - answer-An access category is a priority class. 802.11 specifies four
different priority classes - voice (AC_VO), video (AC_VI), best effort (AC_BE), and background
(AC_BK).

Access Control List (ACL) - answer-ACLs are lists that inform a STA or user what permissions are
available to access files and other resources. ACLs are also used in routers and switches to
control packets allowed through to other networks

Access Layer Forwarding - answer-Data forwarding that occurs at the access layer, also called
distributed data forwarding. The data is distributed from the access layer directly to the
destination without passing through a centralized controller.

Access Point - answer-An access point (AP) is a device containing a radio that is used to create
an access network, bridge network or mesh network. The AP contains the Distribution System
Service.

Access Port - answer-An AP used for mesh networks and that connects to the wired or wireless
network at the edge of the mesh.

Acknowledgement Frame - answer-A frame sent by the receiving 802.11 station confirming the
received data

Active Mode - answer-A power‐save mode in which the station never turns the radio off.

Active Scanning - answer-A scanning (network location) method in which the client broadcasts
probe requests and records the probe responses in order to determine the network with which
it will establish an association.

Active Survey - answer-A wireless survey conducted on location that involves measuring
throughput rates, round trip time, and packet loss by connecting devices to an AP and
transmitting data during the survey.

Información del documento

Subido en
26 de agosto de 2024
Número de páginas
24
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$9.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
TOPDOCTOR
5.0
(1)
Vendido
10
Seguidores
5
Artículos
3387
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes