Forklift final exam study prep With Complete Solution

What is the #1 cause for deaths associated with forklift operation? - ANSWER-crushed by vehicle tipping over The top three citations by L & I safety inspectors involving forklifts in include what? - ANSWER-lack of training, no seatbelt use, no inspection of forklift What does P.I.T. stand for? - ANSWER-powered industrial truck How many classes of P.I.T.s are there? - ANSWER-7 What two P.I.Ts will we be certified on upon completion of EV 100? - ANSWER-class 1 electric truck, class 4 truck What are three ways forklifts differ from cars or trucks? - ANSWER-higher weight than most, higher center of gravity, steers from the rear Where is the center of gravity on a forklift with no load? - ANSWER-under the driver's seat The triangle formed between the two front wheels, coming to a point between the two rear wheels, is called what? - ANSWER-forklift stability triangle The center of gravity moves ________ when the fork is raised. - ANSWER-upward It is safe to move forward with a load raised if the weight is low enough. T/F? - ANSWER-false When moving a load near the truck's max rated capacity, tilt the mast _____ for more stability. - ANSWER-back When driving on an incline with a load, always drive with the load on the _______ side. - ANSWER-uphill When driving down an incline with no load, the forks should be on the _______ side. - ANSWER-downhill As load center increases, capacity decreases. T/F? - ANSWER-true If a forklift tips, you should attempt to clear the vehicle before it hits the ground. T/F? - ANSWER-false A forklift should be examined how often? - ANSWER-daily or at the end of each shift Propane powered forklifts are safe to park near heat sources. T/F? - ANSWER-false You should always use gloves and eye protection when dealing with propane. - ANSWER-true Forklifts have blind spots near the front masts. T/F? - ANSWER-true When carrying an irregular and/or heavy load, you should keep the load as close to the front wheels as possible. T/F? - ANSWER-true It is safe to lower a load while backing up if you go slowly and check blind spots first. T/F? - ANSWER-false Always drive with the forks lowered and lower forks to floor when parking the forklift. T/F? - ANSWER-true At railroad crossings, forklifts should cross the tracks ________ to maximize stability. - ANSWER-diagonally A forklift is considered "unattended" when the operator is 25 ft. or more away from the vehicle even if it remains in operator view, or when it is out of operator view. T/F? - ANSWER-true When a forklift is left unattended, it's okay to leave it running if it's still in operator view. T/F? - ANSWER-false Propane powered forklifts produce what compound? - ANSWER-carbon monoxide Congested areas, poor lighting, and uneven floors are what category of hazard? - ANSWER-environmental What does 'A' signify on a forklift nameplate? - ANSWER-maximum lifting height What does 'B' signify on a forklift nameplate? - ANSWER-load center, horizontal and vertical What does 'C' signify on a forklift nameplate? - ANSWER-any significant offset When a forklift carries a load, the center of gravity moves forward toward the load. T/F? - ANSWER-true This is the distance the forks can be raised BEFORE any part of the mast begins to extend upward is called what? - ANSWER-freelift