Dante Level 3 Test Study Questions

Describe follower, primary clock leader, and boundary clock - Answer follower: a device that accepts a clock from another source primary clock leader: a device that is the original time reference for all other devices on the network. boundary clock. A device that accepts a clock from another source, then feeds that clock to other devices. Are dante flows unicast or multicast by default? - Answer Unicast Does dante domain manager subscribe to other networks when the transmitter is multicast? - Answer Yes. Dante domain manager can take multicast from a transmitter and send it as unicast across a router to another subnet. A campus network has different subnets for each of the twenty buildings. A project calls for a system design where Dante devices would be present in every building. The VLANs are connected by standard inter-VLAN routing. Dante Domain Manager is present in the design. Can we establish a single dante domain for all the background music and paging equipment across the entire campus, throughout all subnets? - Answer Yes. We will need to make sure we have enough flows to cover the unicast feeds, but otherwise this is fine. When we share sources from one domain to another, how much control do we have? - Answer we have a choice between sharing channels to all domains in a group, or for more customization, we can choose which channels are available in each domain. If all dante devises are enrolled in dante domain manager and a random person connects to your network and launches dante controller, will they be able to see anything? - Answer No. Dante controller will not show any devices on DDM until you have entered your credentials. How does dante controller discover a new device when it is first connected to the network? - Answer dante controller listens for an mDNS "discovery" announcement at 224.0/0/251:5353