Exam (elaborations) GC 120

3D part models are used to communicate between OEMS and suppliers instead of 2D drawings. - ANSTrue A 2D drawing is more accurate than a 3D model for programming a machine tool. - ANSFalse A 3D solid part whose geometry must be fully defined before it is merged into an assembly model is an example of top-down modeling. - ANSFalse A complete set of working drawings for a design typically includes: - ANSdetail drawings, assembly and/or subassembly drawings, a bill materials, and a standard titleblock. A(n)_____ in an assembly defines surface coplanar with the direction vector opposing each other. - ANSmate All of the following are uses for auxiliary view EXCEPT finding the: - ANSTrue shape of a curved surface. Augmented reality tools are immersive, digital environments used for the design review of products - ANSFalse Driving dimensions define to 2D sketch geometry and 3D features along with geometric constraints. - ANSTrue In an assembly model, a component can be either a single part file or a sub-assembly file consisting of its own components - ANSTrue In building an assembly model, individual parts that are bought into the assembly are called - ANScomponents In order to bring multiple instances of a part into an assembly, I would need to make multiple copies of the part file. - ANSFalse It is not possible to use construction geometry in a 3D assembly model - ANSFalse Kinematics, Mass Properties Analysis, and Finite Element Analysis are al techniques that leverage the 3D model for evaluating the digital p