Nccer Study Guide || All Correct.

1. Which organization requires a person to be trained in order to operate personal lifting equipment? correct answers OSHA 1. Where would the usage of a RTJ Gasket be found? correct answers High Pressure System All of the following are examples of internal man way hardware except correct answers Slide Fastener 1. What type of wrench measures how much a fastener is being tightened? correct answers Torque 1. The fitting that makes it easy to disassemble threaded piping is correct answers Union 1. What is the purpose of a gasket? correct answers TO CREATE A SEAL BETWEEN 2 STATIONARY PARTS 1. When rigging a valve the sling should be placed around the correct answers Body What is the minimum required oxygen and fuel gas storage separation when not in use and stored in open area? correct answers 20' When tightening up a man way on a tower that has ¼" x 8" stud bolts what size wrench should you use? correct answers 2" What should a worker do before removing the flange bolts on the exchanged channel head? correct answers VERIFY BLINDS ARE IN A BLEEDERS ARE OPEN AND LOTO In a piping threading machine equipped with NPT dies is designed to cut which type of threads? correct answers NATIONAL PIPE THREADS Flange protectors should be removed from the valve when correct answers READY FOR INSTALLATION Which sling configuration has the greatest capacity? correct answers VERTICAL To pull a bundle from the shell the eyebolts should be installed on the correct answers TUBE STEEL What is the standard pipe thread used in the USA? correct answers NPT After getting a hot work permit, who must be present before starting the work? correct answers FIRE WATCH What type of metal would an oxy fuel torch be used to cut? correct answers CARBON STEEL