• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 6 páginas
Examen

Imse 250 Final (3).

Document preview thumbnail
Vista previa 2 fuera de 6 páginas

Exam of 6 pages for the course Imse 250 at Imse 250 (Imse 250 Final (3).)

Vista previa del contenido

Imse 250 Final
Single point cutting involves the removal of metal from a workplace using cutting tools that only
have one primary cutting edge. Which is not a single cutting process? - ANS-Drilling a hole
using a twist drill lathe

Generally speaking, the _______ the rake angle, the sharper cutting edge. - ANS-Larger

For a given uncut chip thiscness, a small shear angle means a ______ cutting force. -
ANS-High

Which one of the following input parameters is the LEAST associated with continuous chip
generation? - ANS-Large depth of cut

______ occurs on the tool face that interacts with the newly-generated surface of a workplace -
ANS-Flank wear

Which represents the surface roughness from smoothest to roughest? -
ANS-Honing<Reaming<Drilling

For either slab of face milling, surfaces can be generated by two different methods: up milling
and down milling. In which method a higher clamping force is needed to hold the workplace? -
ANS-Up milling

Close pockets are usually machined by________ - ANS-End milling

For a standard twist drill, the cutting speed along with the main cutting edges is________ -
ANS-Different at different points

Abrisive machining is a mixture of_______ - ANS-cutting, plowing, and rubbing.

Grinding operation is widely used in automotive industry, but has no applications in
semiconductor industry - ANS-False

Grain size, bond type and pore size all affect wheel performance. Which is not true. -
ANS-Grinding wheel labeled by a larger mesh size usually produces rougher surfaces.

The surface roughness and accuracy produces by grinding is generally ______ that produces
by turning or milling. - ANS-better than

The material removal rate of a typical grinding process is ______ that produced by milling -
ANS-lower than

, In nontraditional machining processes, the hardness of the machine tools must be greater than
workplace being machined. - ANS-False

Abrasive waterjet machining belongs to ______ non-traditional machining processes. -
ANS-mechanical

Which one of the following is not an advantage of chemical machining? - ANS-high material
removal rate

Which one of the following does not generate a heat affected zone? - ANS-Abrasive waterjet
Machining

Which one of the following is not among the limitations of electrical discharge machining? -
ANS-Can cut only 1 hole at a time

In ultrasonic machining, either the tool or the workplace vibrated at a high frequency. -
ANS-True

Both ultrasonic machining and rotary ultrasonic machining can machine square cavities? -
ANS-False

In solid state welding, the temperatures at the welding interface _____ the melting point of the
workplace materials. - ANS-will not exceed

Why are some parts machined in two different parts? - ANS-The joined part is typically stronger
than a single piece.

Welding processes _____ generate residual stress in a joint. - ANS-will

Riviting is used when - ANS-the joined parts will not be separated.

Resistance welding is in the group of_______ welding - ANS-Fusion

Brazing involves melting both the filler material and the workplace. - ANS-False

Which on elf the following reinforcing fibers in composite materials has the highest temperature
resistance? (Space shuttle) - ANS-Ceramic

Which kind of matrix can be reused? - ANS-Thermoplastics

In the carbon fiber reinforced plastic composites, the major function of fibers is to _______ -
ANS-Support the load.

Información del documento

Subido en
16 de julio de 2024
Número de páginas
6
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$8.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
scholartutor
4.8
(923)
Vendido
2790
Seguidores
3
Artículos
10787
Última venta
4 días hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes