Basic Orientation Plus/ OSHA Training 2024/2025 Q&A

Barriers - correct answer--Physical devices that are designed to prevent entry into an area where hazards are present Caution Signs - correct answer--Used to warn against potential hazards or to caution against unsafe practices Danger Signs - correct answer--Used only where an immediate life-threatening hazard exists If you are replacing a piece of equipment, the new one should be the same as the one being removed. If it's not, you should find out whether the change was on purpose....what is this called? - correct answer--Management of Change Key elements in recognizing hazards and reducing/eliminating workplace hazards - correct answer--a. Management Leadership b. Hazard Prevention and Control c. Program Evaluation and Improvement d. Worker Protection e. Multi-employer Work sites f. Hazard Identification and Assessment g. Education and Training OSHA stands for - correct answer--Occupational Safety and Health Administration PHAs are used to identify and evaluate major processes and ensure they are: - correct answer--a. identified b. evaluated c. Controlled PPE - correct answer--personal protective equipment Process Safety Management standard - correct answer--OSHA standard that addresses the requirements for preventing and lessening the results of a bad release of toxic, reactive, flammable, or high explosive hazardous chemicals from a process The ____________ is one of the most important parts of the PSM program. - correct answer--Process Hazard Analysis To operate a plant-owned vehicle or mobile equipment while at a facility, you must be _____________ to do so by the equipment owner. - correct answer--qualified and authorized